progressive automations RT-14 User manual

RT-14
User Manual
2.4GHz
24 Feet
RJ45
Range
RF Frequency
Connection Type
Remote Size (L x H x W)
0.25lbs
Warranty 18 Months
Receiver Size (L x H x W) 2.81" x 1.08" x 1.97"
Function Up/Down/Stop (Momentary/Non-Momentary)
Weight
5.50" x 0.80" x 2.20"
Compatibility FLTCON Series (1,2,3,4)
FLT Table Lifts
FLT Lift Columns

Dimensions
COM
5.50"
0.80"
2.20"
2.17"
Ø0.13"
Ø0.07"
1.97"
2.81"
Cat5 Wire,
7.2" Long
0.87"
1.08"
1.97"
The RT-14 can toggled between momentary and non-momentary functionality. In order to do this you must
hold the COM button down for 10s.
Non-Momentary: Press the button to raise/extend your unit. Unit will keep moving until it reaches upper limit
or you can press any button to stop it's movement cycle. Press the button to lower/retract your unit. Unit will
keep moving until it reaches lower limit or you can press any button to stop it's movement cycle.
Momentary: Press and hold the button to raise/extend your unit, release the button to stop it's
movement cycle. Press and hold the button to lower/retract your unit, release the button to stop it's
movement cycle.
Remote Functionality
Operational Procedure
Connect the receiver to the FLT control box. To pair the remote, press and hold the "connect" button located in
the pinhole on the receiver. While holding the connect button, press both the and button on the remote
until the light on the remote turns on.