ProLights ECLIPSEHDTWC User manual

USER MANUAL
MANUALE UTENTE
ECLIPSEHDTWC
EN - IT
LED PROFILER

All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV. 06-07/19

1
ECLIPSEHDTWC
Packing content • ECLIPSEHDTWC
• Mount bracket
• Power cable
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specifications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 DMX Mode
3. 5 DMX Configuration
3. 6 Linking
3. 7 Screen
3. 8 Advanced
3. 9 Information
3. 10 Master/Slave mode
3. 11 Effects
3. 12 Static mode
3. 13 Manual mode
3. 14 DMX Control
3. 15 Connection of the DMX line
3. 16 Contruction of the DMX termination
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement
4. 3 Trouble shooting
2
2
3
3
5
6
7
7
8
10
11
11
11
11
12
12
12
12
13
14
21
21
22
22
22

ECLIPSEHDTWC
2
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the fixture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Do not dismantle or modify the fixture.
• All work must always be carried out by qualified technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
• Always additionally secure the projector with the safety rope.When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the fixture’s being used.
• Install the fixture in a well ventilated place.
• Keep any inflammable material at a safe distance from the fixture.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their effectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Do not touch the product’s housing when operating because it may be very hot.
• This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
• We decline any liability deriving from improper use of the product.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.

3
ECLIPSEHDTWC
- 1 - INTRODUCTION
1.1 DESCRIPTION
ECLIPSEHDTWC is an advanced LED ellipsoidal featuring 6 colour mixing to deliver high precision repro-
duction of the white spectrum from 2.800 K to 10.000 K with high CRI and an extensive colour reproduc-
tion.
The optical system harnesses the power of a 91x3,5 W custom LED with 6 colours to create an even beam
with clean shutter cuts and beautiful sharp or soft edge gobo focusing.
Featuring HD dimming and tuning from 2.800 K to 10.000 K version, the ECLIPSEHDTWC delivers the per-
formance and quality of output demanded from this level of light.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 91x3,5W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
• CT: 2.800 K - 10.000K
• CRI: > 90
• R9: (2.800 K) 91,9 - (4.000 K) 95,3 - (5.600 K) 92,8
• Luminous flux: (19°) 6’044 lm, (26°) 5’625 lm, (36°) 6’279 lm, (50°) 5’687lm @Full
• Lux: (19°) 9’220 lx - (26°) 4’750 lx - (36°) 2.980 lux - (50°) 1’210lx @3 m full
• Source life expectancy: >50.000 h
• Other: TLCI: 86
OPTICS
• Beam angle: optional 19° / 26° / 36° / 50° / Z15-30° / Z25-50°
• Lens type: high-quality glass lens optics
• Focus: manual
COLOUR SYSTEM
• Colour mixing: RGBL,orange,royal blue
• CTC: CTC control through independent DMX channel, + / - green and magenta correction and amber
shift activation by DMX
• White presets: 2.800 K - 10.000K
• Colour wheel: virtual colour wheel with presets
DYNAMIC EFFECTS
• Gobo size: B
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of dimmer and strobe
• Auto mode: built-in programs with execution speed adjustment
• Special features: linear crossfade from a white to any color and CTO applied on colours
BODY
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: black
CONTROL
• Protocols: DMX512, RDM
• DMX channels: 2 / 5 CH1 / 5 CH2 / 7 / 9 / 12 / 13 / 16 / 19 / 21channel
• RDM: RDM ready for fixture remote monitor and settings
• Display: black OLED high resolution display
• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain
• Other: 16bit control of dimmer and colour

ECLIPSEHDTWC
4
Technical drawing Fig.1
551
262 595
ELECTRONICS
• Dimmer: linear 0 ~ 100% electronic dimmer
• Dimmer curves: 4 different dimming curves available
• Strobe / shutter: 1 - 30 Hz, electronic
• Operating temperature: -10° ~ +45°
• Flicker: flicker free operation
• Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
• Power supply: 100-240 V – 50/60 Hz
• Power consumption (at 230 V): 252W
• Power consumption (at 120 V): 257W
• Output (at 230 V): 14 units on a single power line
• Output (at 120 V): 7 units on a single power line
• Power factor: pF 0,99 @120 V - pF 0,92 @230 V
PHYSICAL
• Cooling: combination of heat pipe cooling system and low noise fan
• Sospension and fixing: hanging bracket suitable for safe hanging and positioning
• Signal connection: Amphenol XLR 5p IN/OUT connectors
• Power connection: Neutrik powerCON IN/OUT connectors
• IP rating: 20
• Dimensions (WxHxD): 262x551x595mm
• Weight: 7,8kg

5
ECLIPSEHDTWC
Fig.2
Rear panel
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. MOUNTING BRACKET
2. LOCKING KNOB for the mounting bracket
3. HANDLE
4. ECLIPSEHDTWC
5. SAFETY EYE to attach safety cable.
6. SHUTTER
7. ECLIPSEMP - Aluminium middle part
8. FUSE OLDER in the event of breakage, always
replace the fuse with the same type and
rating (T3.15A).
9. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them.
10. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable.
11. POWER OUT (PowerCON OUT): connect to
supply power to the next unit.
12. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
13. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
1
2
4
5
3
7
610
9
11
13
812

ECLIPSEHDTWC
6
Fig.3
2
1
CLAMP
SAFETY
CABLE
- 2 - INSTALLATION
2.1 MOUNTING
ECLIPSEHDTWC may be set up on a solid and even surface. The unit can also be mounted upside down to a
cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability
and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by means of the mounting bracket (1).
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.

7
ECLIPSEHDTWC
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the OLED Display
(fig.4).
MENU UP DOWN ENTER
Used to access the menu or
to return a previous menu
option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.4 - Functions of the buttons
MENU UP
DOWNENTER

ECLIPSEHDTWC
8
3.3 MENU STRUCTURE
MENU
1CONNECT ðDMX Address ðValue (001-512) Default: 001
DMX Mode ð
1CH ðAmber Shift on
Default: 5CH1
Color
Temperature ðCTO 2800 - 10000K Default: 2800K
Color Picker ð3200K
71
97
100
...
777
Default: 3200K
Customization ðRed (000~255)
Orange (000~255)
Green (000~255)
Royal Blue (000~255)
Blue (000~255)
Lime (000~255)
Default: 255
2CH ðAmber Shift on
Color
Temperature ðCTO 2800 - 10000K Default: 2800K
Color Picker ð3200K
71
97
100
...
777
Default: 3200K
Customization ðRed (000~255)
Orange (000~255)
Green (000~255)
Royal Blue (000~255)
Blue (000~255)
Lime (000~255)
Default: 255
5CH1
5CH2
7CH1
7CH2 ðColor Picker ðNo Action
3200K
71
97
100
...
777
8CH
9CH
12CH
13CH
16CH
19CH
21CH
2SETUP ðScreen ðBack Light ðOn
10 s
20 s
30 s
Default: 10 s
Flip Display ðNo-Yes Default: No
Key Lock ðNo-Yes Default: No

9
ECLIPSEHDTWC
3ADVANCED ðFull On Mode ðHB
Studio
Default: Studio
Dimmer Mode ðOff
Dimmer 1
Dimmer 2
Dimmer 3
Default: Off
White Balance ðOff
Adjust ðRed (125~255)
Orange (125~255)
Green (125~255)
Royal Blue (125~255)
Blue (125~255)
Lime (125~255)
Default: Off
Led Frequency ð 600Hz
1200 Hz
2000 Hz
4000 Hz
6000Hz
25kHZ
Default: 1200Hz
Fan Mode ðAuto
On
Off
Silent
Default : Auto
Factory Reload ðNo-Yes No-Yes Default: No
4INFORMATION ðFixture TIme ð0-9999
Version ðV1.0
UID ð15D00218****
5STAND ALONE ðMaster/Slave ðMaster
Slave
Default : Slave
Static ðEffects ðEffect1
Effect2
Effect3
Effect4
Effect5
ð(1~100) Default: Effect1
Speed=100
Color Temperature ð2800K
3000K
3200K
3400K
3600K
...
9200K
9400K
9600K
9800K
10000K
ðDimmer (000~255)
Hue (025~025)
Default : 2800K
Dimmer=255
Hue=0
Color Picker ð3200K
71
97
100
...
777
ðDimmer (000~255) Default:
3200K
Manual Color Red
Orange
Green
Royal Blue
Blue
Lime
ð(000~255)
(000~255)
(000~255)
(000~255)
(000~255)
(000~255)
Default:
all=255

ECLIPSEHDTWC
10
3.4 DMX MODE
• To set the DMX address, press the button MENU so many times until the display shows Connect, then
select throught the buttons UP/DOWN Dmx Address, then press the button ENTER.
• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To operate the ECLIPSEHDTWC with a light controller, adjust the DMX start address for the first a DMX
channel. For example, If the controller is provided with to command the function of the first DMX channel,
adjust the start address 33 on the ECLIPSEHDTWC. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
DMX Address: 48DMX Address: 38DMX Address: 33 DMX Address: 43
Fig.5 - Example 5 DMX channels configuration
DMX512 Controller
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
1 33 33 34 35 36
2 33 33-34 35 37 39
5 33 33 - 37 38 43 48
7 33 33 - 39 40 47 54
8 33 33 - 40 41 49 57
9 33 33 - 41 42 51 60
12 33 33 - 44 45 57 69
13 33 33 - 45 46 59 72
16 33 33 - 48 49 65 81
19 33 33 - 51 52 71 90
21 33 33 - 53 54 75 96
. . . . . . . . . . . .

11
ECLIPSEHDTWC
3.5 DMX CONFIGURATION
ECLIPSEHDTWC has several DMX channel configurations that can be accessed from the control panel.
• Press the button MENU so many times until the display shows Connect, then select throught the buttons
UP/DOWN DMX Channel, then press the button ENTER.
• Select the desired DMX configuration (1CH, 2CH, 5CH1, 5CH2, 7CH1, 7CH2, 9CH, 12CH, 13CH, 16CH, 19CH, 21CH)
through the buttons UP/DOWN.
3.6 LINKING
1. Connect the DMX OUT output of the main unit to the DMX IN input of the first secondary unit using a
5-pin XLR cable.
2. Connect the DMX OUT output of the first secondary unit to the DMX IN input of the second secondary
unit, etc.
3.7 SCREEN
It is possible to modify the following parameters, related to the display, following the same procedure:
• Press the button MENU to enter the menu mode.
• Press UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button to access
the next menu.
• Press UP/DOWN button to select Screen and press the ENTER button to proceed.
• Select the proposed option and press the ENTER button to confirm.
-Backlight - Auto Off display backlight. This function allows you to switch off automatically the back-
lighting of the display after a certain time which can be set using the directional keys. To have the
display always on select On or set a value between those shown (10s, 20s, 30s) to turn off the display
once the chosen time has elapsed, after exiting the menu.
-Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select Yes to activate the function, No to
deactivate it.
-Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-
pering with the settings. If this function is activated, the keys are locked automatically. To disable or
temporarily disable or disable the key lock function, press the keys in the following order to regain
access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or
No to deactivate it.
• Press the ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.8 ADVANCED
You can change the parameters for the device by following these steps:
• Press the button MENU to enter the menu mode.
• Press UP/DOWN button to select the Advanced. Press the ENTER button to confirm.
• Press UP/DOWN button to select the desired option and press the ENTER button to confirm:
- Full On Mode - Select the Full on Mode function to set the HB mode (High Brightness Mode, with the
- maximum value of the colours) or Studio mode with a automatic white balance.
- Dimmer Mode - Adjusting the dimmer. Enter in Dimmer Mode to select specific dimming curve.
Particularly when set:
• Off: The increase in light intensity is linear.
• Dimmer 1: dimmer curve with low fade.
• Dimmer 2: dimmer curve with medium fade.

ECLIPSEHDTWC
12
• Dimmer 3: dimmer curve with high fade.
- White Balance - To balance the white on each colour. Select the colour (Red, Orange, Green, Royal Blue,
Blue and Lime) and the value (125 ~ 255) using the UP / DOWN button and press the ENTER button to
confirm.
- LED Frequency - To adjust the frequency of the LEDs. Select the frequency 600 Hz ~ 25 KHz using the UP /
DOWN button and press ENTER to confirm the selection.
- Fan Mode - Fan Speed. Select the fan speed (Auto, On, Off, Silent) using the UP / DOWN button.
- Factory Reload - To reset the unit. Select Yes or No and select the UP / DOWN button to confirm.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.9 INFORMATION
To view all the information on the device, proceed as follows:
• Press the button MENU to enter the menu mode.
• Press UP/DOWN button to select Information, then press the ENTER button to access the next menu.
• Press UP/DOWN button to scroll through the menu, then select one of the following informationa and
press the ENTER button to display it.
- Fixture Time - To view the operating time of the projector.
- Software Version - To view the firmware version will show on the display.
- UID - To view the identification ID for the RDM control.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.10 MASTER/SLAVE MODE
This mode will allow you to link up the units together without a controller. The first unit will be set as mas-
ter and other units will work as slave with the same effect.
• Press the button MENU so many times until the display shows Stand Alone, then select throught the
buttons UP/DOWN Master/Slave, then press the button ENTER.
• Press UP/DOWN and select the Master/Slave mode to set the unit as master or slave (Master, Slave).
• Use the ECLIPSEHDTWC DMX connectors and an XLR cable to form a drive chain. In certain conditions
and lengths, it is recommended to terminate as shown on page 18.
3.11 EFFECTS
This fixture has a built-in automatic program. To access this, please see the below instructions:
• To enter the Effects mode, press the ENTER button to access the menu.
• Press UP/DOWN button to select Stand Alone, then select Effect. Press ENTER to confirm
• Press UP/DOWN button to select the desired program Effect 1, Effect 2, Effect 3, Effect 4, Effect 5 then press
ENTER to confirm.
• Set the value (1 - 100), then press the ENTER button to confirm.
3.12 STATIC MODE
This fixture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the fixture.
• Press the button MENU so many times until the display shows Stand Alone, then select throught the
buttons UP/DOWN Static, then press the button ENTER.
• Select Color Temperature through the buttons UP/DOWN, then press the button ENTER.
• Set the colors 2800K, 3000K, 3200K, 3400K, 3600K, …9200K, 9400K, 9600K, 9800K, 10000K, through the buttons
UP/DOWN, then press the button ENTER.

13
ECLIPSEHDTWC
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.13 MANUAL MODE
To set the customized balance of red, orange, green, royal blue, blue and lime colors, refer to the following
procedure:
• Press the button MENU so many times until the display shows Stand Alone, then select throught the
buttons UP/DOWN Static, then press the button ENTER.
• Select Manual Color Mixer through the buttons UP/DOWN, then press the button ENTER.
• Select the color Red, Orange, Green, Royal Blue, Blue, Lime through the buttons UP/DOWN, then press the
button ENTER.
• Using UP/DOWN button, select the desired color value 000 ~ 255.
• Press ENTER button to continue to the next color Red, Orange, Green, Royal Blue, Blue, Lime.
• Continue until the desired mix is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

ECLIPSEHDTWC
14
3.14 DMX CONTROL
1 CHANNEL
MODE FUNCTION DMX
Value
1 Ch
1DIMMER
0~100% 000 - 255
2 CHANNELS
MODE FUNCTION DMX
Value
2 Ch
1DIMMER
0~100% 000 - 255
2
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
5 CHANNELS 1
MODE FUNCTION DMX
Value
5 Ch1
1DIMMER
0~100% 000 - 255
2
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038- 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 255
3
HUE
0
-25°~25°
000 - 000
001 - 255
4
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
5
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255

15
ECLIPSEHDTWC
5 CHANNELS 2
MODE FUNCTION DMX
Value
5 Ch2
1DIMMER
0~100% 000 - 255
2DIMMER FINE
0~100% 000 - 255
3
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038- 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 255
4
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
5
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
7 CHANNELS 1
MODE FUNCTION DMX
Value
7 Ch1
1RED
0~100% 000 - 255
2ORANGE
0~100% 000 - 255
3GREEN
0~100% 000 - 255
4ROYAL BLUE
0~100% 000 - 255
5BLUE
0~100% 000 - 255
6LIME
0~100% 000 - 255
7
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
7 CHANNELS 2
MODE FUNCTION DMX
Value
7 Ch2
1DIMMER
0~100% 000 - 255
2RED
0~100% 000 - 255
3ORANGE
0~100% 000 - 255
4GREEN
0~100% 000 - 255
5ROYAL BLUE
0~100% 000 - 255
6BLUE
0~100% 000 - 255
7LIME
0~100% 000 - 255

ECLIPSEHDTWC
16
8 CHANNELS
MODE FUNCTION DMX
Value
8 Ch
1
COLOR PICKER
No Funciton
3200K
71
97
100
101
102
103
104
105
106
107
110
111
113
115
116
117
118
119
120
121
122
124
126
128
130
132
134
135
136
137
138
139
141
144
147
151
152
156
157
158
161
164
165
166
170
174
179
180
181
182
195
197
000 - 000
001 - 003
004 - 007
008 - 011
012 - 015
016 - 019
020 - 023
024 - 027
028 - 031
032 - 035
036 - 039
040 - 043
044 - 047
048 - 051
052 - 055
056 - 059
060 - 063
064 - 067
068 - 071
072 - 075
076 - 079
080 - 083
084-087
088 - 091
092 - 095
096-099
100 - 103
104 - 107
108 - 111
112 - 115
116 - 119
120 - 123
124 - 127
128 - 131
132 - 135
136 - 139
140 - 143
144 - 147
148 - 151
152 - 155
156 - 159
160 - 163
164 - 167
168 - 171
172 - 175
176 - 179
180 - 183
184 - 187
188 - 191
192 - 195
196 - 199
200 - 203
204 - 207
208 - 211
8 CHANNELS
MODE FUNCTION DMX
Value
8 Ch
198
200
201
202
203
204
205
206
702
730
777
212 - 215
216 - 219
220 - 223
224 - 227
228 - 231
232 - 235
236 - 239
240 - 243
244 - 247
248 - 251
252 - 255
2DIMMER
0~100% 000 - 255
3RED
0~100% 000 - 255
4ORANGE
0~100% 000 - 255
5GREEN
0~100% 000 - 255
6ROYAL BLUE
0~100% 000 - 255
7BLUE
0~100% 000 - 255
8LIME
0~100% 000 - 255

17
ECLIPSEHDTWC
12 CHANNELS
MODE FUNCTION DMX
Value
12 Ch
1DIMMER
0~100% 000 - 255
2STROBE No Function
Strobe slow to fast 000 - 010 011 - 255
3RED 000 - 255
4ORANGE 000 - 255
5GREEN 000 - 255
6ROYAL BLUE 000 - 255
7BLUE 000 - 255
8LIME 000 - 255
9
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
No Funciton
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038 - 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 252
253 - 255
9 CHANNELS
MODE FUNCTION DMX
Value
9 Ch
1DIMMER
0~100% 000 - 255
2RED
0~100% 000 - 255
3ORANGE
0~100% 000 - 255
4GREEN
0~100% 000 - 255
5ROYAL BLUE
0~100% 000 - 255
6BLUE
0~100% 000 - 255
7LIME
0~100% 000 - 255
8
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
9
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255

ECLIPSEHDTWC
18
16 CHANNELS
MODE FUNCTION DMX
Value
16 Ch
1DIMMER
0~100% 000 - 255
2DIMMER FINE
0~100% 000 - 255
3RED
0~100% 000 - 255
4RED FINE
0~100% 000 - 255
5ORANGE
0~100% 000 - 255
6ORANGE FINE
0~100% 000 - 255
7GREEN
0~100% 000 - 255
8GREEN FINE
0~100% 000 - 255
9ROYAL BLUE
0~100% 000 - 255
10 ROYAL BLUE FINE
0~100% 000 - 255
11 BLUE
0~100% 000 - 255
12 BLUE FINE
0~100% 000 - 255
13 LIME
0~100% 000 - 255
14 LIME FINE
0~100% 000 - 255
15
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
16
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
12 CHANNELS
MODE FUNCTION DMX
Value
12 Ch
10 HUE 0
-25°~25° 000 - 000 001 - 255
11
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
12
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
13 CHANNELS
MODE FUNCTION DMX
Value
13 Ch
1RED
0~100% 000 - 255
2RED FINE
0~100% 000 - 255
3ORANGE
0~100% 000 - 255
4ORANGE FINE
0~100% 000 - 255
5GREEN
0~100% 000 - 255
6GREEN FINE
0~100% 000 - 255
7ROYAL BLUE
0~100% 000 - 255
8ROYAL BLUE FINE
0~100% 000 - 255
9BLUE
0~100% 000 - 255
10 BLUE FINE
0~100% 000 - 255
11 LIME
0~100% 000 - 255
12 LIME FINE
0~100% 000 - 255
13
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode off
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255