PROLiNK PVR Series User manual

1
1. Introduction
This PVR series is designed to automatically maintain a constant
voltage level to protect sensitive electronics from brownouts and
overvoltages. Equipped with comprehensive information display, it’s
easy to monitor the power status.
 Microprocessor control guarantees high reliability
 Selectable input voltage range
 Time delay function eliminates transients that can affect
connected equipment.
 Startup countdown time display (only available for the unit with
digital display)
 Over-voltage, under-voltage, over-heat and over current
protection
 Provides surge and spike suppression
PROLiNK
Automatic Voltage Regulator
User Manual
500VA-3000VA
2
2. Product Overview
Side View
Back View
500/1000 1500/2000 3000
3. Installation
Inspection
Remove the AVR from the shipping package and inspect the unit. Be
sure that nothing inside the package is damaged.
Placement
Please install the AVR in a protected environment.
 Do NOT block the top or side air vents on the
unit. Please reserve 20cm space to avoid
interference.
1. Power switch
2. Output voltage
display/Startup countdown
display (Only for Digital
display)
3. Input voltage display
4. Handle (Optional for
500VA/1000VA)
5. Startup delay time switch
6. Input voltage range
selector
7. Power LED (Green)
8. AVR LED (Yellow)
9. Over-voltage / under-
voltage indicator (Red)
10. Output sockets
11. AC input
12. Grounding (black)
13. Line output terminal
(brown)
14. Neutral output terminal
(black)

3
 Do NOT operate the AVR where the temperature and humidity is
outside the specific limits. (Please check the specs for the
limitations.)
Connect Your Equipment
Plug equipment into the AVR rear-panel outlets. Then switch the unit
on by press the front panel power switch to “RESET” position.
CAUTION: The total power consumption of all equipment plugged into
the AVR must not exceed its capacity (Refer to spec). It may cause the
breaker to fault (blow).
4. Operation
Setting Startup Delay Time Switch
Delay : Setting delay time as 3 minutes. It’s designed to avoid
damage devices with AC motor from consecutive starts. It’s perfect to
use with devices such as refrigerators, freezers, air conditioners or
dehumidifiers.
Undelay : Setting delay time as 10 seconds. It’s designed for use
with voltage sensitive equipment such as: personal computers,
monitors, inkjet printers, scanners or faxes. It’s also designed for use
with home appliances such as televisions, stereos, CD/DVD players,
VCRs, modems, and telephone equipment.
Setting Input Voltage Range
110~270 V :Setting acceptable input voltage range within 110~270V.
140~260 V :Setting acceptable input voltage range within 140~260V.
4
Specification
Model PVR
500
PVR
1000
PVR 2000 PVR 3000
Capacity 500VA 1000V
A
2000VA 3000VA
Input
Voltage
220VAC
Voltage
Range
110-270VAC or 140-260 VAC
Frequency
Range
50 Hz or 60 Hz
Output
Output
Voltage
220VAC
Voltage
Regulation
-10% ~ +10%
Efficiency
Normal
Mode 95%
AVR Mode
92%
Physical
Dimension
(DxWxH)
mm
197 x 110 x 124 234 x 134
x 181
297x
150x199
Net Weight
(kgs)
2.4 3.91 6.55 8.56
Environment
Temperature 0-40°C
Humidity
0
-
90% relative humidity (Non
-
condensing)