Promate Gyre User manual

360oRotatable Protective Leather Case with
Detachable Bluetooth Keyboard for iPad Air
User Guide
Gyre

Gyre, is a multifunctional case with a detachable Bluetooth® keyboard which
seamlessly connects with an iPad Air for a quicker and more comfortable typing
experience. The sophisticated styling of the Rotating Stand features a unique
mechanism that allows the iPad to rotate and provides varied viewing angles. This
case sports an elegant and classy leather exterior design along with a soft inner
micro-fiber lining. All features of the iPad are accessible even with the case on. The
compact structure of the case offers convenient mobility so you can just grab your
iPad and be ready to go knowing it will be protected at all times!
• Gyre Bluetooth® Keyboard & Case
• Micro-USB charging cable
• User Guide
• Warranty Card
• Bluetooth® Specification: v3.0
• Operating Voltage: 3.7V DC
• Charging Time: 2-3 Hours
• Maximum Working Time: 60 Hours
• Standby Time: 30 Days
• Operating Distance: Up to 10 meters
• Made from PU Leather and ABS Plastic Keyboard
Introduction
Packaging Contents:
Specification:
1

Please read all safety instructions and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or attached products.
1. Do not disassemble the device or attempt to fix it.
2. Do not attempt to replace any part of this device or battery inside.
3. Do not crush, puncture or dispose of in fire.
4. Do not store or use the device in a high temperature environment, including
intense sunlight or heat.
5. Avoid excessive drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is internal damage to the device,
discontinue use immediately.
7. If you find that the device is too hot, is emitting and odor is deformed, punctured
or exhibits any suspicious or abnormal behavior, discontinue use immediately
and contact our customer service.
8. Always charge this product before extended storage.
• Ultra-thin and compact design
• Classy leather exterior design along with a soft inner micro-fiber lining
• Form fitting with raised edges for added protection
• Specially placed magnets to securely hold the keyboard in place
• Detachable keyboard for added ease and comfort
• Sleek and stable Bluetooth® keyboard support
• Raised tactile keys for ease of typing
• Fast Bluetooth® keyboard pairing capability
• Unique 360orotating stand mechanism for multiple viewing angles
• Full access to iPad Air’s buttons and switches
• Made From PU leather and ABS plastic keyboard
Features:
Precautions:
2

1. Power On/Off Switch
2. Bluetooth® Connection Key
3. LED Indicators
4. Micro-USB charging Port
Appearance & Interface Description:
3
3
2
1
4

Plug the USB cable included to a USB port and the other end into Gyre’s charging
jack. Charging Status LED will light up red while it is charging and when fully
charged turns green. When battery is low, the Red LED will start blinking. When
this happens, kindly charge Gyre immediately. Before using the Bluetooth®
Keyboard for the first time ensure that it is charged for at least 2-3 hours.
• Turn the keyboard on by sliding the Power On/Off Switch to the” On” position.
• Activate Bluetooth® on your iPad Air, by going to settings, taping on the
general tab, going to the Bluetooth® setting and turning it on.
• Set it to search for new devices.
• To activate pairing mode on Gyre, press and hold the Bluetooth® Connection
Key for 2-3 seconds until the Blue LED indication begins blinking.
• Select "Gyre" from the list of found devices on your iPad and connect.
• Enter the 4 digit passcode shown on your iPad Air using the Bluetooth®
keyboard to pair and connect Bare to your device.
• Blue LED will turn off once paired.
3. Charging
Operation Instructions:
4
1. Basic Operation
• Power switch: Located on the keyboard, switch it to turn Gyre on/off.
2. Bluetooth® Pairing Mode