Promowide DH100 User manual

` DH100
2.4GHz Digital Wireless Headphone
User’s Manual
Please read before using the equipment.
Please visit www.promowide.com for details.

P.1
INTRODUCTION
This 2.4GHz Digital Wireless Headphone uses latest digital wireless technology that
enables you to enjoy music and TV sound anywhere inside your home. Simply
connect the transmitter to a desired audio source: DVD player, CD player, TV set,
VCR or Hi-Fi system. Without complicated wiring and installation with your
Audio/Video equipments and rear channel amplifier, the system enables you to
enjoy thrilling, lifelike sound in minutes.
FEATURES
1. 2.4GHz Digital UHF Technology.
2. 38-Channel Auto Frequency Searching System.
3. Smart Volume Memory Built-in.
4. Electronic Volume Control.
5. Low Power Indicator Alert.
6. High Power 3 x NiMh Batteries
7. Auto Pin Charging Mechanism.
8. Auto On/Off.
9. Auto Shut Off.
10. Muting.
11. Speed charging mechanism.

P.2
COMPONENT PART LIST
A) TRANSMITTER
1. Power & Charging indicator.
2. Charging pins.
3. Audio IN socket.
4. DC IN socket.
B) HEADPHONE RECEIVER
5. Volume Up & Down Control.
6. Charging LED indicator.
7. Charging contacts.
8. ON/OFF Control.
9. Power LED indicator.
C) ACCESSORIES
10. RCA cable.
11. NiMh batter
ies for Headphone
(3 pieces).
12. 3.5mm to 6.3mm adaptor plug.
13.
AC/DC adaptor ( 1x 9V 400mA for
transmitter).
1
2
3
4
5
6
9
8
7
10
11
12
13

P.3
INSTALLATION
TRANSMITTER
1. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
2. Plug the AC/DC power adaptor in the DC jack located on the rear of the
transmitter.
3. The rear of the transmitter has one audio cord that can be connected to audio
output jack of TV, VCR, Hi-Fi, CD/MP3/VCD/DVD players or to
headphone/earphone jack with the connector provided.
Plug the adaptor in the AC source and connect the audio plug to the audio source.
The transmitter will automatically switch on and the red LED will light up when it
receives an audio signal.
HEADPHONE RECEIVER
1. To install or replace the rechargeable batteries, carefully remove the leather
padding around the left and right earphone plates out from the cabinets.

P.4
2. Insert 2pcs of AAA size rechargeable batteries (supplied in the package) into
the right earphone’s battery compartment and 1pc of AAA size rechargeable
battery (supplied in the package) into the left earphone’s battery compartment.
Make sure the batteries are placed at the right polarity.
3. Cover the leather padding back after inserted the batteries.
OPERATION
Transmitter
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The Charging / Power LED on the transmitter will light up in red
when it receives the audio signal.
Headphone
1. Turn on the headphone by pressing the Power button. The POWER LED (Red)
will light up, the green LED will be flashing until signal link between transmitter
and receiver is established.
Charging / Power LED
Signal LED
(Green)
Power LED
(Red)