PROPEL Orthodontics VPro5 User manual

Fast in 5 MinutesFast in 5 Minutes
Fast in 5 MinutesFast in 5 Minutes
Fast in 5 Minutes

What is the VPro5?
The VPro5 is a device that uses high frequency vibration to
seat clear plastic aligners.
1

VPro5Components?
»VPro5 Oscillator
»VPro5 Mouthpiece
»Charging Cable & Wall Adapter
»USB flash drive preloaded with Usage Summary Software
2

Directions for Use
1. Remove device from packaging and clean the mouthpiece (rinse with water & dry).
2. Charge the device fully prior to first use/first patient appointment.
3. Clinician will assign the device to a specific patient ID (per respective practice naming
conventions) prior to first patient appointment. Once assigned, device will be ready for use.
»

4. Connect the mouthpiece to the vibration device. Confirm that the device feels secure and stable.
5. 
The device will gently ramp up to full vibration.
6. 
treatment.
LED Notification light blinks green to indicate cycle is complete (page 4 for all notifications)
8. After use, clean and charge the device as needed
3

Your Guide to Light Notifications
Blue • 5 minute cycle is in progress
Green • 5 minute cycle is complete (3 blinks)
• Device is fully charged
Red • Switch is pressed by user before treatment is complete
• When the 5 minute treatment is interrupted and not resumed within
the 30 minute window
• When the device is on/vibrating and user connects to USB (vibration
will stop)
• When the 5 minute treatment is interrupted and user connects to USB
within the 30 minute window.
Magenta • Device is at low battery level
Amber • Device is plugged into charger
4

Usage Summary Software
Assigning a Patient: Step by Step
»Please connect the device to your computer via the blue wire USB cable provided with your
device.
»Please insert USB into computer. When prompted, select the Apple or PC folder that
corresponds to your computer. Save the software file to your desktop (you will only need to do
this one time) and open the software.
»Once open, please select “Assign Device to a Patient.”
5

Usage Summary Software
Assigning a Patient: Step by Step
»Enter new patient details and customized patient ID of your choice and select “Add patient.”
6

Usage Summary Software
Assigning a Patient: Step by Step
»At this point, please select “Assign” to the right of the newly entered patient details. Device is
now ready to record patient use.
»You will be able to obtain usage summary when you next plug in the vibration device at
subsequent patient visits.
7

Usage Summary Software
Accessing Usage Data
»To view patient usage data, please open the software which should be saved to your desktop.
»Please connect the device to the computer and select “Usage Summary From Device” to view
data for patient currently using device.
»If you would like to access data from stored users, please open software and select “Usage
Summary From Stored Records” to access archived information.
8

Usage Summary Software
Usage Results Example
9
»Graphical representation of patient’s VPro5 compliance will appear in the center of the software
interface.
»A usage log will populate on the right side of your software interface.

[phone] | PropelOrthodontics.com
© 2016 Propel Orthodontics
[phone] | PropelOrthodontics.com
© 2016 Propel Orthodontics