proSmart BBoil User manual

Manufacturer:
Pro Smart Ltd
78 Maestro Kanev Str.
1618 Sofia, Bulgaria
bboilrf.com/en

џThe product:
џBBoil is a Wi-Fi programmable
thermostat controller. The device is
an Internet connected relayed
module, that includes a weekly
schedule. The laer could be
programmed and controlled via an
Internet connected PC desktop
computer or a smartphone.
џBBoil allows the fast
automazaon of every electrical
device, regardless of its
manufacturer or model
џThe technology set in BBoil allows
it to connect with any wireless
Internet, without the need of any
addional sengs.
џBBoil is a complex system with
which you not only turn on and off
your devices remotely, but
manage and adjust a number of
devices in your home, office,
house or villa.
џBBoil allows the users to receive
real me informaon for all
connected devices — their work
and current status.

Why choose BBoil:
џSaves you money from your electricity bill
џOptimizes the use of every connected electrical device or appliance
џComplete integrated control system
џEasy to use and user friendly software interface
џFlexible work modes – thermostat and on/off
џWork with up to four wireless sensors
џWork with up to four wireless sensors for BBoil RF and four wired ones
for BBoil Classic.
BBoil could be used for:
џControl of electric water heaters
џControl of gas boilers and solid fuel boilers
џControl of solar systems
џControl of irrigation systems
џControl of indoors and outdoors lighting
џControl of various types of electric devices and appliances
We have two types of BBoil devices: BBoil Classic which has a wired
temperature sensor and BBoil RF with wireless temperature sensor.

Technical specification

Programme
Upper and lower hysteresis
(set by the user in the outlined ranges)
Central charging block
Central block – consumption
Central block – working frequency
Central block – size
Temperature sensor - voltage*
Temperature sensor – working frequency*
Temperature sensor – range*
Temperature sensor – size*
Working humidity
Weekly schedule work
Manually set temperature
Turned off
Max. 230V~; 16 А (4 A inductive load)
100-240V~ 50/60Hz 35mА Т45
Minimum of 100m of empty space
3V (2×1,5V type АА) alkaline batteries (LR6)
Protecon degree, provided by the sheath IP20 - at installaon posion

Ambient temperature during transportation from –20°С till +60°С
Air humidity during transportation from 5% till 90% without condense
Main unit fuse
Wireless temperature sensor’s fuse
FF1 T 250mA 250V 35A
F1 IH 0,30A IT 0,60A U 30V Imax 10A
0,1s max
Overvoltage category
II
SELV
Chain type
Wireless communication
Network topology
* It concerns the BBoil RF modification

Safety instructions
Please, read before using the device for the first time
The outlined safety procedures below are to be followed while using the current
product. Please, do follow all warnings in the device’s user manual.
General safety instructions
You are the only one responsible for the device’s usage, as well as for any caused
damages in consequence of that. The device’s usage is a subject of the set safety
measures for the customers and their environment. Please do not press the
device too hard. Always use it and its accessories gently and keep them in a clean
place, away from any dust. Do not expose them to open fire or in any proximity to
lighted tobacco products. Do not let the device and its accessories to fall down, do
not throw or fold them. Do not use any aggressive chemicals, detergents or
aerosols for their cleaning. Do not paint them and do not attempt to disassemble
the device or its accessories. That could be accomplished only by a qualified
professional. The device’s working temperature is from 0°С till +45°С and storing
temperature of –20°С till +60°С. For removing electric products’ waste, the

national and regional legislations are followed. The device is to be installed in
electric switchboards or in the device/s it will manage and is created to control
household devices and equipment.
Any unauthorised reconstruction and/or product modification is strictly
forbidden following the European safety and approval directives (CE). The device
works at supply voltage of 100-240V~/50/60 Hz. Services, settings and repairs
could be accomplished only by an authorised service provider. For its repair use
only the original spare parts. The usage of other spare parts could cause significant
damages or injuries. If you notice any damage, please stop using the device. The
device is intended for direct connection to TN / IT AC power supply 100-240V,
50/60Hz. Before cleaning the device, disconnect it from the power supply. Do not
use any liquids or aerosols.
The device’s installation is accomplished according ro the manufacturers’
instructions, the НD 60364-4-41 regulations and the national legislations.
Attention! Damaged power supply cables are a life treath as could lead to an
electric shock.
Do not use the device if there is a damaged cable, power supply cord or network
plug. In the case of power supply cable’s damage, please leave its repair to a
qualified professional!

Do not leave children with the device without supervision!
Do not let children play with the device. They cannot properly assess the danger of
using electric devices. The device is not intended for use by individuals (including
children) with limited physical, sensory or mental capabilities or without any
experience and/or knowledge unless they are controlled by an individual
responsible for their safety or have received instructions on how to use it. Use, set
and keep the product only in places away from children. Do not leave the packing
materials spread aimlessly. They could be a dangerous toy for your children. Your
new device contains many small components with sharp edges that could cause
injuries and upon disassemble - a swallowing or suffocation risk.
Electric safety
This device could be used only when powered by the specific supply unit. Every
other way could be dangerous and terminates the validity of any issued device’s
certificate. Use the correct external power supply. The device should be powered
only by the specific power supply as indicated on the nominal electric power
supply’s nameplate. If unsure of the power supply’s type, please turn to the
authorised service provider or to the local electric services company. Please, be
extremely careful. Store and use the device in a place far from water or other
liquids as those could cause a short circuit.

Dangerous environment limitation usages
Do not use this device in gas stations, gas storages, chemical plants or in places
where flow blasting is taking place, locations with potentially explosive
environment, for instance in places such as fueling areas, gas storages, ship holds,
chemical plants, in installations for fuel or chemical transportation or storage and
in zones where the air contains chemicals or particles such as grain, dust or metal
particles. The sparks in such places could cause a blast or fire and in consequence -
a severe health damage, even death.
In case you are in a flammable materials’ environment, the device must be turned
off and the user is to follow all instructions and warning labels. The sparks in such
places could cause fires or explosions, leading to injuries and even death.
We highly recommend to not use the device in fueling areas, workshops or gas
stations. The customers should follow the limitations set for high frequency
devices’ usage in fuel storages, chemical plants or in places of flow blasting work
process.
Damages requiring repair
In case of any of the outlined cases below, unplug the device from the power
supply and look for an authorised service provider or turn to the supplier for
specialized repair: the product had been exposed to rain or moisture, slipped, hit,

damaged or has visible overheating traces.
Even though you are following the user manual, the device is not working
correctly. Do not expose it to heating or in a close proximity to a heating source,
such as radiators, thermal accumulators, furnices or other equipments (including
amplifiers) that emit heat. Keep your device from any humidity. Never use the
product in rain, in a close proximity to sinks, in other moist environment or in such
with high air humidity. If the device ever gets wet, do not attempt to dry it off in a
furnice or a dryer for the risk of damage is high!
Do not use the device after a sudden temperature change. If you are transferring
the device between environments with big temperature and humidity level
differencies, it is possible for the steam to condense on the surface and inside of
the device. In order to avoid the device’s damage, please do wait for the moisture
to evaporate before using the device. Do not insert any elements in the device that
are not part of its original accessories!
EU-regulations and disposal
The device fulfills all needed standards for the free movement of goods within the
EU. This product is an electric device and as such must be collected and dispose of
according to the European directive on waste electrical and electronic equipment
(WEEE)

This product is in accordance of the regulations in Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment
(RoHS) and its recasts.
Burns and fire prevention
Do not use the device if the premises’ temperature goes above 40°C. Keep the
highly flammable materials away from the device. Make sure free air access
around the device is available.

BBoil is a programmable thermostat controller set up to work with a wired or
wireless temperature sensor. It is suitable for building and home installaons,
without the need of addional wiring. The wireless sensor communicates
directly with BBoil, sending real me informaon regarding the recorded
temperature in the premises, where it is installed. Using the received data, BBoil
controls the heang and/or cooling installaon, maintaining the previously set
values from the user.
The innovave design and the independent power supply of BBoil RF's wireless
sensor allows the easy installaon and exploitaon of the device in various
professional and home systems for heang or cooling.
BBoil Classic package includes central control unit and a wired temperature
sensor. BBoil RF package includes central control unit and a wireless temperature
sensor. The two devices are already united and ready for use. During the set's
installaon, the user installs BBoil according to the user manual to the desired
device or appliance to control.
The product complies with the requirements of EN 50491-3.

BBoil is created to work on the following environmental conditions:
- For premises’ work;
- For altitude up to 2000m;
- For ambient temperature from 0°С till +45°С;
- For average maximum air humidity for temperature of up to 31°С -
80%, linear decreasing to 30% average humidity for 45°С temperature;
- For power supply deviation of ±10% to the measured range of power
supply;
- For use under the conditions of the overvoltage category II;
- For environment with level 2 pollution (Pd2).
Attention! The protection against inflation and fire spreading is provided by
the terminal equipment in which you would be embedding your device.
Please keep all devices for remote control away from children.
Please watch the product’s video installaon and usage
instrucons on the following link: hps://bboilrf.com/en

Step 1:
1.1 Every BBoil RF set includes:
1 pcs central control block;
1 pcs wireless temperature sensor;
1 pcs user manual for installaon
and usage;
Unpack the device and take the two main elements
out of the box (Scheme 1a).
Installation guide
1.2 Every BBoil Classic set includes:
1 pcs central control block;
1 pcs wired temperature sensor;
1 pcs user manual for installaon and usage;
Scheme 1a

Aenon! Switch off the power supply before installing BBoil RF.
We highly recommend the installaon to be performed by a qualified
technician. If you do not possess the needed knowledge and qualificaon,
please do turn to an authorised retailer!
Aenon! Do not modify or influence the built in protecon of the electric
device in any way!
Unpack the device and take the two main elements out of the box
(Scheme 1b).
Scheme 1b

The device can be used for control of electric devices and appliances, heating
systems or low-current systems that allow interruption of input fuse or are
controlled by normally open/normally closed circle.
100-240V~
50/60Hz
35mА Т45
The BBoil‘s thermostat can easily connect
to every gas/pellet boiler or other heating
system that has a double core connector
for room thermostat.
Connect the two connection points of the
device you wish to control to the outputs
NO and COM, that is to the relays’
normally open outputs. The thermostat’s
installation is outlined in Scheme 2a. The
device must be installed and connected by
a qualified professional.
Scheme 2a

Bboil RF could be used as a room thermostat. For that type of installation the
temperature sensor is positioned in the premise where the temperature is to be
measured.
Scheme 2b shows an
example of a BBoil
Classic connecon to an
electrical boiler.
The temperature
sensor could be used for
measuring the temperature
in the device by placing it
in the specialized plug.
Water heater
Sensor's input
Button
Digital
temp.
sensor
Analog
temp.
sensor
Scheme 2b

The thermostat can also be used in cooling mode. In that case, the output
terminals NO and COM are closed above the set temperature. Please contact
the manufacturer/distributor of the cooling equipment for the installaon. The
cooling mode can be chosen in secon ‘Sengs’ from both the web page and
the mobile applicaon aer ‘Login’ into the system.
1.3 Central control block’s installaon
Connect the power supply cable to the
BBoil’s main control block. Aer that,
connect it to the power supply
(Scheme 3).
1.4 Installaon possibilies
BBoil is a product, constructed for
installaon in limited access zones and must
be installed to the switchboard using a
Eurorim (Scheme 4).