Heatmiser neoX User manual

The Heatmiser neoX is designed to extend the communication distance
between neoStats.
The neoX needs to be connected to your system and you do this via the free
App that can be downloaded from the Apple App Store, Google Play Store,
Amazon App Store or Windows Phone Store .
To add the neoX to your system, select Manage Zones > Add repeater from the
global menu in the App.
To remove the neoX from your network press and hold the Connect button
for 10 seconds. The Link and Radio Signal LEDs will go out indicating it has been
removed from your network.
Introduction
Factory Reset
Twitter: heatmiseruk Facebook: facebook.com/thermostats
Want More Information?
Call our support team on: [phone]
Or view technical specifications directly on our website:
www.heatmiser.com
PDF FAQ
The Heatmiser neoX is designed to extend the communication distance
between neoStats.
The neoX needs to be connected to your system and you do this via the free
App that can be downloaded from the Apple App Store, Google Play Store,
Amazon App Store or Windows Phone Store .
To add the neoX to your system, select Manage Zones > Add repeater from the
global menu in the App.
To remove the neoX from your network press and hold the Connect button
for 10 seconds. The Link and Radio Signal LEDs will go out indicating it has been
removed from your network.
Introduction
Factory Reset
Rev 1.0
Twitter: heatmiseruk Facebook: facebook.com/thermostats
Want More Information?
Call our support team on: [phone]
Or view technical specications directly on our website:
www.heatmiser.com
PDF FAQ
Rev 2.0
The Heatmiser neoX is designed to extend the communication distance
between neoStats.
The neoX needs to be connected to your system and you do this via the free
App that can be downloaded from the Apple App Store, Google Play Store,
Amazon App Store or Windows Phone Store .
To add the neoX to your system, select Manage Zones > Add repeater from the
global menu in the App.
To remove the neoX from your network press and hold the Connect button
for 10 seconds. The Link and Radio Signal LEDs will go out indicating it has been
removed from your network.
Introduction
Factory Reset
Twitter: heatmiseruk Facebook: facebook.com/thermostats
Want More Information?
Call our support team on: [phone]
Or view technical specications directly on our website:
www.heatmiser.com
PDF FAQ

1 2
3 4
Installation Procedure
Please read the instructions fully so you get the best from our product.
LED Status Wiring Diagram - NeoX
Power Switch
Connect Button
There are 3 LEDs in use on the neoX
Power LED Permanently on when the neoX is powered.
Link LED Permanently on once the neoX has been paired to the network.
Radio Signal LED Permanently on whilst the neoX is in range of the network.
Power LED
Link LED
Radio Signal LED
Stylish Thermostats For Modern Living
N L
Neutral
Live
230VAC
Mains Supply In
Recommendations
Max Cable Size - 1.5mm
Back Box Depth - 35mm
The neoX is designed to be flush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the neoX from the back plate by placing
a small flat head terminal driver into the slots on the bottom face of the neoX.
Step 2
Place the neoX front somewhere safe.
Terminate the neoX as shown in the wiring diagram.
Step 3
Screw the neoX back plate securely into the back box.
Step 4
Clip the front of the neoX back onto the neoX back plate.