Protective Enclosures Company The TV Shield User manual
1
385 CenterPointe Circle, Suite 1319,
Altamonte Springs, Florida. 32701
1-800-331-2628
info@protecveenclosures.com
Save this assembly manual for future reference in the event that you need to order replacement parts.
INS-A-TVSHIELD-ENG 04/01/19 Made in the USA
The TV Shield: Sizes 19-29” and 30-32”
2
WHAT KIND OF MATERIALS ARE THE TV SHIELDS MADE OUT OF?
We researched and tested scores of materials (metals, coated wood/synthec wood products, berglass, and many plascs)
unl we found the perfect soluon. The TV Shield® outdoor weatherproof and water-resistant TV enclosure is craed from
premium, exible materials because of their strong, water-resistant, scratch-resistant, and UV-resistant properes. The
housing of The TV Shield® is made from HMWPE or High Molecular Weight Polyethylene. The front panel is made from
industry leading ultra-clear Lexan® polycarbonate.
HOW ARE YOUR TV COVERS MADE?
The TV Shield® outdoor LCD TV enclosure (outdoor Plasma TV cover) is handcraed in the U.S.A. in award winning
manufacturing and assembly facilies. All materials are water and UV-resistant so they will protect your TV from the
elements.
IS THERE A BEST PRACTICE FOR PLACEMENT OF THE TV SHIELD?
Yes, please see “BEST OUTDOOR PRACTICES” aer Step 12 of these instrucons.
HOW DO I CLEAN MY TV COVER?
Your outdoor TV cover will look its best when kept clean. The back housing can be cleaned with a mild soap and water.
However, the front panel is a special material, which will look best if you use one of our APPROVED CLEANING PRODUCTS
listed in your owner’s manual in the “CLEANING INSTRUCTIONS” secon.
WILL THE OUTDOOR TV COVER WORK WITH DIFFERENT KINDS OF WALL MOUNTS?
Yes, The TV Shield® is engineered to be “universal,” and is able to be used with all “standard” VESA mounng systems. You
can follow the provided instrucons in order to drill the back of the unit to t your mount and conguraon. This not only
lets our patented The TV Shield® be “universal,” but also allows for the minimum number of holes or moisture entry points.
DO I NEED TO MEASURE MY TV?
Yes, measuring is VERY important, especially if you plan to use a larger TV than our adversed primary sizes. Measure the
dimensions of your TV and compare with the inside dimensions of the enclosure to make sure it ts before you drill it. The
TV Shield® is manufactured to t:
"
FITS MOST 19" TO 29" TVS
MAX INTERIOR DIMENSIONS: 27.75"W X 19.75"H X 4.75"D
EXTERIOR DIMENSIONS: 32.25"W X 23.75"H X 6.25"D
WEIGHT: 19 LBS
FITS MOST 30” TO 32” TVS
MAX INTERIOR DIMENSIONS: 29.5”W X18”H X 3.80”D
EXTERIOR DIMENSIONS: 34.25”W X 21.9”H X 4.75”D
WEIGHT: 24 LBS
Please be aware that due to the size and weight of the front panel, there will be some bowing when it is open. This is okay
and will not damage the unit. There may also be some bend in the back housing and this is also acceptable.
Please be advised that the seal around the back housing will sele over me and you may need to apply force to close and
lock the unit for 2 to 4 weeks (depending on the climate). Aer mounng the enclosure, it may be necessary when opening
and closing the unit to connue to align the threaded screws into the front panel unl the unit completely seles. This
“alignment” system is integral to the structural rigidity and water-ght sealing of The TV Shield®.
If the back of The TV Shield® is drilled incorrectly, it is essenal that the incorrect hole(s) be repaired. As a courtesy to our
customers, Protecve Enclosures Company will provide rubber plugs to seal the holes. Please call our customer service
department at 1-800-331-2628.
Use only the approved cleaning products (sold on our website) to clean the enclosure. Regular household products may
cause streaking and reducon in opcal clarity.
When opening the front panel, the black threaded caps can be stored in the small black drawstring bag that is provided with
the enclosure.
3
Thank you for purchasing The TV Shield®. Please read the following before starng the installaon process.
The TV Shield® is designed to be used in conjuncon with a TV wall mount, ceiling mount or any other mount using a VESA
standardized mounng paern (sold separately). Upon successful installaon, The TV Shield® should be “sandwiched”
between the back of the TV and the mount.
You will need to unscrew the 6 black threaded caps from the front panel to open The TV Shield®.
If you are mounng your unit in an outdoor environment, we have come up with some best pracces to
reduce the glare and to give you the best viewing of your TV or monitor.
• Purchasing an enclosure with an-glare or installing our an-glare front panel will reduce the glare to an extent,
but does not eliminate it.
• Mount The TV Shield® in an area that does not get direct sun if possible.
• If mounng in direct sun or in an area that gets a lot of sun, it is best if you have some type of backdrop in front
of The TV Shield®. E.g. if you can mount the enclosure where there is a wall in front of it, trees, bushes or any
other darker objects, it will help with reecon.
• Use a lng and swiveling mount as you may be able to angle the enclosure in dierent direcons to reduce the
amount of glare or reecon while watching.
• Depending on your TV’s opons, change the picture mode (in the sengs menu) to dynamic and/or adjust the
contrast, brightness, sharpness and color.
4
TOOLS REQUIRED FOR INSTALLATION
These are the tools that are generally required for assembly of our products. These tools are not included with the
product purchase, nor included in the box. You will need to use the hardware from a separately sold TV wall or
ceiling mount.
Cordless Drill or Electric Drill 5/32" or 4 mm, 3/16" or 5 mm, 1/4"
or 6 mm, & 5/16" or 8 mm Drill Bit
Phillips Screw Driver Flashlight
Tape Measure Ulity Knife
An Adult w/ an Adult HelperSeparately Sold Mount (You Will Need Hardware from
Separately Sold Mount During Installaon)
5
PARTS IDENTIFICATION
Included in Box
(1) The TV Shield®(4) Foam Blocks for Mounng (2) Prop Arms
(1) Small black drawstring bag (Keep for caps when removed) with:
(4) Extra Knurled Caps, (4) Keys, (1) 11/4” Round Black Handle and (1) 1/2”
Screw (used to install handle)
(1) Mounng Hole Template
Fan Filter and Cover
(Only included if the unit was
purchased with a fan)
(2) Vent Caps
(4) - M8 - 5/16” x 3/4” METAL-BONDED
WASHER - TH10015
(4) - M5 - #10 x 5/8” METAL-BONDED
WASHER - TH10013
(4) - M6 - #12 x 3/4” METAL-BONDED
WASHER - TH10014
(4) - M4 - 0.18 X 0.5” METAL-BONDED
WASHER - TH10020
6
STEP 1
1. Remove the knurled caps as shown in the image below.
CUT 1 - VERTICAL
NOTE: BE SURE TO CUT ALL THE WAY THROUGH.
CUT 2 - HORIZONTAL
CAP - KNURLED - BLK .25X.50
STEP 2
1. Remove the boom grommets and make vercal and horizontal cuts as shown below.
GROMMET - BOTTOM - LG
(2 pieces)
7
STEP 3
1. Arrange the foam blocks on the ground and then place the TV face down on them, as shown in the diagram.
2. Pick the correct size screw that your TV uses by either checking the owner’s manual or by taking the provided threaded
screws from your separately sold mount and screwing them into the mounng holes located on the back of your television.
Remove the screw aer checking as you will need this informaon for Step 5 below.
STEP 4
1. Locate and mark the horizontal and vercal centers on the back-side of the TV. Lay the provided template over the back
of the TV and align the template cross-hairs with the previously located horizontal and vercal centers on the TV. Mark the
mounng bracket hole locaons on the template, as shown below by punching a hole in the template.
Measure to center
and mark
Measure
to
center
and
mark
PAPER TEMPLATE
Mark the holes
in all (4) places
8
STEP 5
1. Transfer the hole paern to the back of your The
TV Shield® by aligning the cross-hairs etched into the
surface of The TV shield® with the cross-hairs on the
template.
2. Drill holes in the back of The TV Shield® at the locaon
marked on the template using the drilling schedule
below which is based on the threaded stud size you
tested in Step 3:
Drill through the back of The TV Shield®
STOP
PAPER TEMPLATE
Fastener Size: Drilling Bit:
M4
M5
M6
M8
5/23" or 4 mm
3/16" or 5 mm
1/4" or 6 mm
5/16" or 8 mm
9
STEP 6
1. Install the power cord and any HDMI/Coax Cable/Component Cables needed, into the correct “port(s)” on the display.
2. Pull all the cords and wires through the opening(s) where you removed the grommets and reinstall the grommets around
the cords.
3. Place The TV Shield® directly over the TV (and foam blocks) and align the previously drilled holes with the mounng holes
in your TV by looking through the drilled hole and lining them up. Using a ashlight in this step may be helpful.
STEP 7
1. Install the mounng screws provided with your separately sold
mount. You will run the screws through the mount bracket, through
the metal bonded washer, through The TV Shield® and into your TV’s
mounng holes (ghten accordingly).
MOUNTING BRACKET
(Sold Separately)
Reinstall all of the grommets
SCREW
PLAIN WASHER
(from separately
sold mount)
MOUNTING BRACKET
(Sold Separately)
WASHER
pieces
10
STEP 9
STEP 8
1. For storage, snap the prop arms into the clips on both side-walls of the unit.
See installaon points in diagram for prop arms when in use.
1) The bent end of the prop arm
goes into the furthest hole
2) Insert the straight end
of the prop arm into
the prop arm support
aached to interior wall
PROP ARM CLIPS
(Located on both inner walls)
1. Peel and remove the protecve paper from both sides of the polycarbonate cover.
Peel here
11
STEP 10
1. Aach the 11/4" pull knob using the hardware shown.
KNOB - RND - 1.25" DIA
(1 piece)
SCREW 1/4-20 X 1/2" FLAT HEAD
(1 piece)
STEP 11
STEP 12
1. Mount the TV, enclosed within The TV Shield® as one unit, according to the TV mount instrucons provided with your
mount (sold separately).
1. Close the cover and replace the knurled caps, as shown.
2. If you purchased a unit with a fan system, please install the included fan lter. This lter protects the TV from bugs, dust
and more. Place the foam lter inside of the lter cover and snap on the exterior of the fan located at the boom of your
enclosure.
3. Installaon of vent caps is only recommended for situaons like wash down and to cap the vents in cold enviroments to
hold in heat. Do not use the cap on vents in extreme hot enviroments as it will block the heat exhaust.
CAP - KNURLED - BLK .25X.50
(6 pieces)
Exterior of enclosure
12
When the polycarbonate sheet is rst installed, the glazing compound and masking paper adhesive can be easily
removed by applying naphtha (VM and P) or kerosene with a so cloth, followed immediately with a thorough
soap and water cleaning (DO NOT USE GASOLINE). Adherence to regular and proper cleaning procedures is
recommended to preserve the appearance of the unit.
Wash the polycarbonate sheet with a mild soap or detergent (such as 409 cleaner) and lukewarm water, using a
clean sponge or a so cloth. Rinse the panel well with clean water. Dry the product thoroughly with a chamois or
moist cellulose sponge to prevent water spots. Do not scrub, use brushes or apply abrasives on these products.
Splashes, grease and smeared glazing compounds can be removed easily before drying by rubbing the shield
lightly with a good grade of naphtha or isopropyl alcohol. Follow the alcohol rub with a mild detergent wash using
warm water and end with a clean water rinsing.
Scratches and minor abrasions can be minimized by using a mild automove polish. Three such products that
tend to polish and ll scratches are Johnson Paste Wax, Novus Plasc Polish #1 and #2, Novus, Inc., Minneapolis,
MN and Mirror Glaze plasc polish (MG M10) Mirror Bright Polish Co., Pasadena, CA. It is suggested that a test be
conducted on a sample of the polycarbonate sheet with the product selected and that the polish manufacturer’s
instrucons be followed.
• DO NOT use abrasive or highly alkaline cleaners on the polycarbonate.
• DO NOT scrape the polycarbonate sheet with squeegees, razor blades or other sharp instruments.
• DO NOT ever use benzene, gasoline, acetone or carbon tetrachloride on the polycarbonate sheets.
• DO NOT clean the polycarbonate sheets in the hot sun or on very hot days.
The following cleaning agents have been found to be compable with polycarbonate (the manufacturer’s
instrucons should be followed):
• The TV Shield® recommended cleaners (found on our website at www.thetvshield.com)
• Formula 409™ (Clorox Co.) Top Job™ (Proctor and Gamble)
• VM and P grade Naphtha Joy™(Proctor and Gamble)
• Windex w/Ammonia D™ (Dracke Products)
• Palmolive Liquid™ (Colgate Palmolive)
• Butyl Cellosolve (for removal of paints, marking pens, lipsck, etc.)
• Masking tape, adhesive tape or lint removal tools (work well for liing o old weathered paints)
• Kerosene, naphtha, or petroleum spirits (generally eecve for removing labels, sckers, etc)
New construcon and renovaons frequently require that the glazing and surrounding sash and wall nish be
cleaned of any excess mortar, paint, sealant, primers or other construcon compounds. Only recommended
cleaners should be used to clean the polycarbonate sheets. Contact with harsh solvents such as methyl ethyl
ketone (MEK) or muriac acid can result in surface degradaon and possible crazing of the polycarbonate.
13
If you are mounng your unit in an outdoor environment, we have come up with some best pracces to
reduce the glare and to give you the best viewing of your TV or monitor.
• Purchasing an enclosure with an-glare or installing our an-glare front panel will reduce the glare to an extent,
but does not eliminate it.
• Mount The TV Shield® in an area that does not get direct sun if possible.
• If mounng in direct sun or in an area that gets a lot of sun, it is best if you have some type of backdrop in front
of The TV Shield®. E.g., if you can mount the enclosure where there is a wall in front of it, trees, bushes or any
other darker objects, it will help with reecon.
• Use a lng and swiveling mount as you may be able to angle the enclosure in dierent direcons to reduce the
amount of glare or reecon while watching.
• Depending on your TV’s opons, change the picture mode (in the sengs menu) to dynamic and/or adjust the
contrast, brightness, sharpness and color.
14
This limited warranty is provided by Protecve Enclosures Company, LLC for The TV Shield® product(s) idened by
the purchaser’s registraon as indicated below. This limited warranty is between Protecve Enclosures Company,
LLC and the registered purchaser of the product. There are no other warranes, express or implied, except as
required by law, including warranes of merchantability and tness for a parcular purpose, that are provided
for herein; however, all such implied warranes, if any, are limited to the duraon of this specic limited product
warranty. Some states do not allow limitaons on how long an implied warranty lasts, so the above limitaons may
not apply to you.
* 3 Year Limited Warranty on high molecular weight polyethylene plasc housing against cracking and breaking
with normal consumer use.
* 2 Year Limited Warranty on the polycarbonate front shield (cover/panel/window) against cracking or breaking
with normal consumer use. This warranty does not cover any scratches or damage caused by abuse or abnormal
use; it only covers against discoloring, cracking, yellowing, or breaking of the polycarbonate front shield.
* 1 Year Limited Warranty on product failure or quality of workmanship and on all other components against any
manufactures defects.
This is a limited warranty, subject to the condions, limitaons and exclusions idened herein. Protecve
Enclosures Company, LLC warrants to the original purchaser of the registered or idened product for a period
of me listed above, from the date of purchase, that the product shall be free of defects in materials, and
workmanship, and subject to the limitaons set forth below; Protecve Enclosures Company, LLC will repair or
replace, at its opon, any defecve unit. Protecve Enclosures Company, LLC hereby warrants to the original retail
purchaser of this product that should this product or any part thereof, under normal use and condions, prove to
be defecve in material or workmanship within one (1) year from the date of the original purchase, such defect(s)
will be repaired or replaced with a new or recondioned product (Protecve Enclosures Company LLC’s opon)
without charge for parts and repair labor. Purchaser must return the product to Protecve Enclosures Company,
LLC, (return receipt requested) or by other means that conrms delivery and Protecve Enclosures Company, LLC
shall make the said repairs or replacement within 60 days of receipt. In some instances the product may have been
disconnued and cannot be replaced, or repaired. In that instance Protecve Enclosures Company, LLC shall in its
discreon aempt to replace the product with a substanally similar product in a current model or design or pay
the purchaser a sum for the then fair market value of the product, considering the amount of depreciaon since
sale, and the use of the product. This Limited Warranty is the original retail purchaser’s sole remedy for any and all
such defect(s).
Proof of purchase is required (i.e. the sales receipt of other proof of payment).
Damage caused by accidents, abuse, misuse or modicaon of the product will render this warranty null and void.
This warranty is applicable only to the original purchaser and is not assignable or transferable. To obtain repairs or
replacement under the terms of this warranty, please contact Protecve Enclosures Company, LLC at 1-800-331-
2628 or visit www.protecveenclosures.com. You will need to provide proof of purchase (dated receipt showing
where the item was purchased) and the product part number in order to receive warranty service. The purchaser
is required to send the product back to Protecve Enclosures Company or to a designated repair center and the
purchaser is responsible for all charges for shipping and handling.
15
1. Products which have been subject to abuse, accident, alteraon, modicaon, tampering, negligence, misuse,
the or aempted the, vandalism, improper installaon, lack of reasonable care, unauthorized repair or service,
or if the model or serial number has been altered, tampered with, defaced or removed.
2. Loss or damage caused by the use of unauthorized cleaning products or methods that damage or destroy the
product.
3. Inial installaon or the removal and re-installaon of the product.
4. Cosmec damage, an act of God, or natural disaster.
5. Products modied or used for any purposes other than for those which the product is specically designed.
6. Damage that occurs in shipment (the third party shipping service is responsible for any shipping damages).
Protecve Enclosures Company, LLC, or any subsidiaries, shall not be liable, under any circumstances, for
incidental, indirect, special, and consequenal or mulple damages as a result of the sale or use of this The TV
Shield® product. Some states and countries do not allow the exclusion or limitaon of incidental or consequenal
damages, so the above limitaons or exclusions may not apply to you.
THE EXTENT OF PROTECTIVE ENCLOSURES COMPANY, LLC’S LIABILITY UNDER THIS WARRANTY IS LIMITED AS
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE LIABILITY OF PROTECTIVE ENCLOSURES COMPANY, LLC EXCEED
THE PURCHASE PRICE PAID BY THE ORIGINAL RETAIL PURCHASER FOR THE PRODUCT.
Protecve Enclosures Company, LLC
The TV Shield | The Display Shield
ATTN: WARRANTY DEPARTMENT
385 Centerpointe Circle
Suite 1319
Altamonte Springs, FL 32701
USA
800-331-2628 Toll Free
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES OR LIABILITIES. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. IN NO EVENT SHALL PROTECTIVE ENCLOSURES COMPNAY, LLC, OR ANY SUBSIDIARY, OWNER,
OR PARTNER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY EXPRESS OR IMPLIED WHATSOEVER.
No person or representave is authorized to assume for Protecve Enclosures Company, LLC any liability other
than expressed herein in connecon with the sale of this product. Some jurisdicons do not allow limitaons on
how long an implied warranty lasts or the exclusion or limitaon of incidental or consequenal damages so the
above limitaons or exclusions may not apply to you. This warranty gives you specic legal rights and you may also
have other rights, which vary from jurisdicon to jurisdicon.
16
We oer a on all unopened, unused and/or undamaged units. The unit
must be unaltered and it must have the protecve covering(s) on the front panel and be undamaged and
in original new condion. A 10% restocking fee applies and all refunds will be minus the actual shipping
charges to and from Protecve Enclosures Company.
Aer 30 days, and up to 90 days from the date of the purchase, if you are not happy with The TV Shield®
enclosure, and have opened it, you can return it for a refund, less actual shipping charges to and from
Protecve Enclosures Company. The unit(s) must have protecve covering(s) on the front panel and be
undamaged and in original new condion. Due to the nature, size and logiscs in inventory management
and distribuon, our restocking fee aer 30 days, and up to 90 days, is 25% and applies to all opened /
new non defecve The TV Shield® enclosures.
Protecve Enclosures Company DOES NOT accept returns on units that have been drilled, scratched,
damaged, abused or have had the protecve coverings taken o of the front panel, as they cannot be
resold as new products. If you have made a mistake when drilling or mounng The TV Shield®, although
we will not accept a return within terms, we do have several remedies available to you to help you repair
the “damaged” area and sll be able to use your unit. Please call our customer service department for
help at 1-800-331-2628 which is toll free, anyme during normal business hours which are between
9:30am and 6:00pm Eastern Standard Time, Monday through Friday.
The TV Shield | The Display Shield
385 Centerpointe Circle
Suite 1319
Altamonte Springs, FL 32701
800-331-2628 Toll Free
Specicaons are subject to change without noce.
All trademarks are the property of their respecve owners.
www.protecveenclosures.com
17
CenterPointe Circle, Suite 1319,
Altamonte Springs, Florida. 32701
1-800-331-2628
Specicaons are subject to change without noce.
All trademarks are the property of their respecve owners.
18
Moisture Control Gel CaseHeater
This Dehumidifying Silica Gel Case
absorbs dampness inside the case
and protects anything that can be
damaged from rust, mildew, and
fungus (the case size is 4”x 2”x 1/2”).
Accessories for PEC’s Outdoor TV & Display Enclosures
CLIMATE CONTROL
Accessories
Visit www.thetvshield.com for Full Product Descriptions and to Order
or Call 1-800-331-2628
Sun rays create a signicant glare challenge for outdoor
TV solutions. This means that light reecting o of a TV or
display can easily hinder viewing clarity. PEC has developed
an innovative anti-glare coating process for shatter-resistant
polycarbonate front panels which eliminates 90% of glare.
PEC’s scratch resistant anti-glare shields enable much higher
quality viewing for TVs and digital monitors placed in direct
sun environments.
Anti-Glare Front Shield
This fan forced heater keeps the
interior temperature of a unit
between 41° F and 47° F (above
freezing). It has an in-line thermostat
and requires at least 1 1/2”of space
between the bottom of the TV and
the enclosure in order to be installed.
Reduces Sun Glare
& Improves Clarity
For Hot or Cold Environments with Moisture, Dust & More...
Models:
TVS1929FSAG
TVS3032FSAG
TVS3643FSAG
TVS4450FSAG
TVS5255FSAG
TVS6065FSAG
Models:
DS1929FSAG
DS3032FSAG
DS3643FSAG
DS4450FSAG
DS5255FSAG
DS6065FSAG
This quick install cover is ideal for those times when you
are not going to use your TV or The TV Shield.
1. Material: waterproof/dustproof premium fabric
2. Elastic t for quick installation and removal
3. Custom designed to t your PEC enclosure
Dust Cover
Add a Layer of
Protection from
Dust, Insects or to
Simply Discourage
Tampering
19
Copyright © 2009-2019 Protective Enclosures Company, LLC | Made in the USA
The TV Shield®, The Display Shield® and The TV Shield Pro® and their logos are trademarks of Protective Enclosures Company
CLEANERS & PROTECTANTS
Shield Cleaner / Polish / Cleaning Pad Combo Kit
Polycarbonate Shield Polish #2 (8oz Bottle)
This solution will provide better audio than a TV could provide
and it far surpasses the sound you would have gotten, giving
you the ability to have music or dynamic movie watching
experiences outside. Some TVs need a converter for this kit.
OUTDOOR AUDIO
Outdoor Audio Speaker Kit 4” Outdoor Dual 3-Way Speakers
Pair of 4”dual 3-way black
50Watt RMS/100watt max
dynamic indoor & outdoor
speakers
20WX2 mini amplier w/ A/C
power adapter
RCA cable
20ft high quality speaker cable
Self-adhesive Velcro®
Kit Includes:
1.
2.
3.
4.
5.
Mini Stereo Amplier (Analog Inputs)
One 8 oz. bottle of PEC Novus #1
cleaner
One 8 oz. bottle of PEC Novus #2
polish
One cleaning pad
Kit Includes:
1.
2.
3.
This kit includes PEC’s top recommended products for keeping
enclosures clean and looking like new.
The Novus #1 cleaner gently cleans all plastics without
scratching and leaves a lustrous shine that resists fogging,
repels dust, and eliminates static. The cleaner also helps
prevent nger marks, contains no abrasives or harsh chemicals
and leaves a smooth, clean, greaseless shine.
The Novus #2 polish removes scratches, haziness, and abrasions
from most plastics. Use the cleaner repeatedly to restore faded
and discolored plastics. The product removes the damage
instead of lling it in and bus out quickly. After restoring, this
solution seals with a coat of polish.
* Never clean polycarbonate with paper towels because they can scratch the shield!
Removes damage instead of
lling it in
Bus out quickly
After restoring, this treatment
seals with a coat of polish
Features:
1.
2.
3.
This polish removes scratches, haziness, and abrasions from
most plastics. Use the solution repeatedly to restore faded and
discolored plastics. A 2oz bottle is also available.
Pair of dual black multipurpose
indoor/outdoor speakers
50 watts of RMS power, with 100
watts of peak power
4” woofer, 25mm poly cone
midrange, & 20mm piezo dome
tweeter
Wall-mountable, UV-treated
ABS enclosure; mounting
brackets included
Each speaker measures:
8.25” x 5.25” x 5.25” (H x W x D)
Features:
1.
2.
3.
4.
5.
These are great
sounding 3-way
speakers that work
indoors or outdoors
with 100 watt peak
power handling (they
can mount to the unit
directly or they can
mount to the wall).
This Amp allows you to
listen to music easily
and includes power
supply, volume control,
a pair of RCA cables
and an RCA Input to
plug into your TV.
2 channel
3.5 input for iPod or any other
MP3/MP4 device
Separate bass & treble controls
Aluminum alloy case
Input power: DC 9- 14.4v 2A
Input impedance: 47k
Frequency response: 20Hz-20kHz
Speaker impedance 2-8ohm
Harmonic distortion: <0.4%
SNR >80db
Size: 6.02” x 3.74” x 1.5”
Two 10ft high speaker ables
Features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Call 1-800-331-2628 or Visit www.thetvshield.com to Order
Polycarbonate Shield Cleaner #1 (8oz Spray)
Improves nger smear resistance
Contains no abrasives or harsh
chemicals
Leaves a smooth, clean,
greaseless shine
Features:
1.
2.
3.
This solution gently cleans all plastics without scratching and
leaves a lustrous shine that resists fogging, repels dust, and
eliminates static.
Premium Digital to Analog Audio Converter
Some TVs need this
item for the audio kit
system to work. TVs
that don’t have RCA
or 3.5mm headphone
outputs need this
Dolby Digital approved,
UL listed converter.
Converts Coaxial or Toslink
signals to analog L/R audio
Toggle switch is used to choose
Coaxial or Toslink as the input
Supports DTS/Dolby Digital
audio source
Built-in Dolby/DB HD, the DTS
HD, LPCM/LPCM with decoding
24-bit S/PDIF incoming bit
stream on left & right channels
Supports a full range of 32k, 44k,
1k, 48k, 64k, 88.2k, 96k, 192k
Power Supply: 5V DC
Features:
1.
2.
3.
4.
5.
6.
7.
Other manuals for The TV Shield
1
Table of contents
