Protex BG Series User manual

DIAGRAM 1.0
DIAGRAM 2.0
WELCOME:
STEP 1 – OPENING THE SAFE:
1. Install the 4 AA batteries in the Power Override Box.
We recommend using high-quality batteries such as
Duracell or Energizer.
2. Plug the Power Override Jack to the Power Override
Hole.
3. Enter code. Factory default code is: 1-2-3-4
4. If the correct code is entered, the LCD Display will
show “OPEN”. If a wrong code was entered the LCD
Display will show “E-CODE”. Please re-enter the right
code.
5. The door will automatically open and the display will
show “OPENED” for 4 seconds.
NOTE: Remove the batteries from the Power Override Box and
install them in the battery box that is located in the back of
the safe door.
ENROLLING:
STEP 2 – CHANGING USER CODE:
1. Open the safe using the code.
2. Enter your new 4-Digit code and press the “LOCK” key.
STEP 3 – CHANGING MASTER CODE:
1. Open the safe using the code.
2. Enter your existing master code. Factory default code is:
8-8-8-8-8-8
3. Press the “LOCK” key. The LCD Display will show “NEU”.
4. Enter your new 6-Digit master code and press the “LOCK”
key. The LCD Display will show “AGAIN”.
5. Enter your new 6-Digit master code again and press the
“LOCK” key. If procedure is successful LCD Display will
show “DONED”, in case of a wrong code the LCD Display
will show “E-CODE”. Please repeat steps 2 thru 5.
2 3

EMERGENCY OPENING:
POWER OVERRIDE:
1. Open the safe by following STEP 1.
KEY OVERRIDE:
1. Gently pull the Keyhole Cover to reveal the Keyhole.
2. Insert the key and turn the key clockwise (right) to open
the safe.
Note: The safe keeps the code in memory up to 6 months
without power.
TIPS:
•Use digits 1 – 0 to enter your code.
•Use the “RESET” key as backspace to clear the last
digit.
•If you don’t want your code showing on the LCD
Display, before you enter your code press the “RESET”
key twice followed by the “LOCK” key. The LCD Display
will show squares instead of digits.
•When the LCD Display shows “LO-BAT” it is highly
recommended to change the batteries as soon as
possible.
User Manual
For
Electronic safe
Models:
BG Series
Rev. 092607
4