Provision 7" User manual

NOTICE: Please read the user manual carefully before
using this product
TFT LCD MONITOR CAR
Operating instructions
Provision

1 4
Dear User
Congratulations on your selection of the revolving roof mounted car
LCD series. We appreciate your purchase of our product. For maximum
enjoyment and prolonged life of this unit, we strongly recommend you
read this owner's manual in detail before attempting to operate the unit.
Please retain this manual for future reference.
The unit you have purchased has the following advantages
1、Radiation shielded
2、Power saving
3、High clarity of LCD screen
4、High Brightness/contrast
5、Wide view angle
6、Quick response time
7、On Screen Display (OSD) and Infrared Remote Control
8、Multiple video/audio cabling options i.e.: VCD/DVD, portable video camera,
webcam, GPS and portable electronic games
WARNING
This unit is not intended for installation in the front driver/passenger
area where it may be seen by the driver. Installation of this unit where
it may impair the driver's concentration is dangerous. The manufacturer
or retailer assumes no responsibility for failing to obey the above
warnings.To reduce the risk of electric shock, please do not expose
this unit to rain, moisture or attempt to open the unit. There are no user
serviceable parts inside the unit.
Caution:
1. Please read these instructions carefully before operating the unit and observe the
relevant warnings.
2. Please keep away from moisture and direct sunlight.
3. Do not attempt to disassemble or remodel the unit yourself to avoid electric shock.
4. Please clean the display with a dry and soft cloth.Do not clean the display with any
alcohol or chemical cleanser.
5. Please ask a qualified engineer to install the unit.
6. Do not try to recharge the remote control battery.
7 Please keep the remote control battery away from children.
8. The display may sometimes show pixels (light dots or dark dots) during use. This is
normal and does not indicate any malfunction.
Performance Parameters
Screen size:7"
Display format:16:9
Video system: NTSC/PAL/SECAM
Power supply: DC 12V±10%
Power consumption:8W
Operating temperature:0℃-50℃C
Storage temperature:-20℃ -60℃
Resolution : 480(W)XRGBX234(H)
Product size:385mm(L)X150mm(W)X26mm(H)
N.W.:900G
Supports OSD control
AV1/AV2 two way input
Picture can be changed up/down ,left/right.
Viewing angle can be adjusted
Can be connected to the in-car camera system for driver rear-view
(camera not included)
Timer function
Blue screen background
Kit contents
Car monitor Unit 1PC
Remote Control 1PC
6 pin male cable 1PC
Bracket 1PC
User Manual 1SET
Provision

1234 567
8
2
Method of wiring
Yellow to V1
Yellow to V2
Fuse2A
Red to12V(+)
Black to grounding
NON IR
IR
Red to 12V(+)
Black to grounding
Fuse2A
Yellow to V1
Yellow to V2
Red to audio
White to audio
3
Functionality
1、IR transmitter: transmitter frequency (left) 2.3MHZ,transmitter frequency
(right) 2.8MHZ
2、OSD function
3、Support PAL/NTSC/SECAM system
4、Blue panel function: if no signal, the panel will be auto-shift to blue mode
5、Up down/ left right revolving
6、When the unit has no signal, the monitor will auto-shift blue screen and in
few minutes, the monitor will be auto-closed
1.Analog function (-)
2.V1/V2
3.Power on/off
4.R/C sensor
5.Menu
6.Analog function (+)
7.Bearing (up/down, left/right)
8.TFT LCD display
Instruction for
function keys
Appearance & Functions
operating instruction
Remote control
VIDEO
SELECT
MENU
MODE
SELECT
LCD REMOTE
Power
Video Select
Volume-
Reverse
Menu
Volume+
1.Power:
Press this button for power
On or Off.
2.Video Select:
Press this button to switch
Video 1 orVideo 2 inputs.
3.Menu:
Enter to function menu
4." " and " ":
Navigate through the various
menu options
5.Reverse:
up down/left right revolving
with diagram
▲ ▲
Provision

Maintenance Term
A:Any natural damages in warranty period will be maintained
free of charge by our company
B: Any maintenance for disassemble self-assertively and
damage over the warranty period should pay relative charge.
C: The quality problem will be maintained free of charge by our any
chain store according to maintenance card in guarantee time.
D. The damage for TFT LCD display isn't in maintenance range.
We will ask for the cost for change.
■Our company will remain the explaining right for above Maintenance Term.
Red White Yellow
Red White Yellow
Yellow to V2
Yellow to V1
Red to audio
White to audio
Red to 12V（+）
Black to grounding
Fuse2A
Connect drawing
+12V BETTER
+
－
Provision