GU Electronic HW Ver 55 User manual

LandRover 2014 VES
- MODEL : HW Ver 55
- DATE : 2020.05.22

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Touch Control
9. OSD(On Screen Display) Control
10. Install Manual
11. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS Input. (DVBT or DVD source)
2. Output Spec.
- 1 x Vertual Analog Touch (Navigation System source)
- 1 x Uart Digital Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN
5. Note: This product does not support front and rear cameras.

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
INTERFACE
CAR
COMMAND
SYSTEM CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
LVDS
LVDS
DVBT/DVD COMPOSITE
NAVIGATION
SYSTEM

GU Electronic
3. Dimension
152mm * 93mm * 20mm
* This can change under manufacturer’s circumstance
152mm
93mm
20mm

GU Electronic
4. External Appearance
DIP S/W
Analog
RGB
PROGRAM
FRONTTOUCHLED
Not use.
Digital
RGB
LCD-OUT
POWER/CAN
IMAGE

GU Electronic
4. External Appearance
Analog
RGB
FRONTTOUCHLED
Not use.
Digital
RGB
POWER/CAN
DIP S/W PROGRAM LCD-OUT

GU Electronic
5. Connector Pin Assignment
*NAVI Connect
①R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DVB-T-IR (Green)
⑦DVD-IR (Orange)
①②③④⑤⑥⑦
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
*POWER Connect
1. Battery (Yellow)
2. Battery (Yellow)
3. N.C
4. KEY1 (Blue)
5. CAN1-L (Green)
6. CAN1-H (Orange)
7. CAN2-L (White)
8. CAN2-H (Purple)
1 15
2 16
9. N.C
10. N.C
11. ACC (Red)
12. N.C
13. N.C
14. Mode (Green)
15. GND (Black)
16. GND (Black)

GU Electronic
6. Product Composition
Interface 1 EA
LVDS Cable 1 EA
Power Cable 1 EA
OSD Board 1 EA
RGB NAVI Cable 1 EA
Touch converter Cable(KD-900) 1 EA

GU Electronic
6. Product Composition
* CarPlay Set Sales(option) – KPLAY
Interface 1 EA AUX Cable 1 EA
Power Cable 1 EA HDMI Cable 1 EA
Microphone 1 EA
Bluetooth / Wifi Antenna 2EA
ACC Board 1 EA

GU Electronic
6. Product Composition
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
* CarPlay(NV17) Set Sales(option)
Microphone 1 EA
ACC Board 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6 OEM NAVI open. ON : YES
OFF : NO
7
CAR type SEL Right Picture
8
* DIP S/W Example
Discovery4 (D4)
RangeRover
RangeRover sports
Evoque
FreeLander2
Jaguar XF (2009~2015)
Jaguar XJ 8" (2011~)
Jaguar XJL
Range Rover Vogue(2014~)
Land Rover Discovery Sports 2.0D SE (2015)

GU Electronic
7. DIP S/W Setting
Before connecting the interface, set DIP-SW 6 for OEM screen.

GU Electronic
8. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates
.
OR
OSD menu -> Utility -> Calibration
Touch control - Calibration

GU Electronic
8. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
8. Touch Control
Assistive Icon Control
Mode Change
Press Assistive Icon
(If you want to move an icon, please press and drag.)
Press Mode Icon
•To use the Assistive Icon, You must select the
“ON” in the menu.
•Select "OFF" when not in use.

GU Electronic
9. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
Reset Execute Reset to default value of Config menu
OSD Config
9. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
Assist UI ON Activate the UI icon
Off Disable feature
UI DVB-T (DMB) ON DVB-T device control UI output
function
OFF Disable feature
UI DVD ON DVD device control UI output
function
OFF Disable feature
NAVI COM
HMS
FINE
:
To use UART Touch, select a
navigation manufacturer.
OFF Do not use features.
Reset Execute Option Menu all Reset
9. OSD(On Screen Display) Control

GU Electronic
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu
DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>
9. OSD(On Screen Display) Control