Proxxon TBM 220 User manual








0
10
20
30
40
1
2
A
B
30
2
40
A
2
1BB
0
10
20
30
40
1
2
4
3
40
30
2
4
3
1
2
3
0
10
20
30
40
50
AB
15
00 100
21
000 2000
31
500 3000
Wmgslgks rtkögfkg sjsf eoutg igjgj
kfjkfgjk kfjkjk igjij wer fpig ijgvigjv idvj
eipwi piedpii ppiipi sdgpsgp jgsigjsi
üooo ssüogksog osdgks
rjgöobjsö psdoss psodp gjigp s
0
10
20
30
40
50
1
10
2
4
75
6
9
3
1
i
og
p
k
wi
edpi
ü
ö
j
objs
wi
e
ooo ss
ö
ö
rjg
g
p
ö
kfjkjk
wi pied
ü
k
eipw
o
rjg
50
mgslgks
kfgj
Wm
kfjk
ü
50
m
Wm
ü
100
31
5
3
k
wi pie
o
sr
gjk kfjk
wi
50
21
0
2
gks r
kfgjk
15
0
150
m
3
10
3
3
gjigp s
gjigp
sf e
wer fpig
piipi s
o
psod
ii pp
gkso
jsi
ki
gg
jv id
ii pi
gjsi
kg sjsf eoutg igjgj
gjij wggj
utg ig
gi
jgvig
sgp
ig
gp jgsi
psodp
dp
dp gji
0
dos
2000
00 30
dvj
kso dgks
sdoss ps
0
20
0
pig
pi sdgps
og osdgk
oss
3000
ki
000
gfkg
01
00
00 20
00
00
300
ö
rtk
AB
00
rt
A
0
0
B
0
50
40
30
2
0
50
40
30
10
9
2
4
7
6
5
9
8
Fig. 1
Fig. 2Fig. 3
-2-

-3-
0
10
20
30
40
50
1
AA
50 40
30
2
1
1
2
1
2
0
10
20
30
40
3
2
1
30
2
40
31
22
1
2
1
2
Fig. 4Fig. 5
Fig. 6Fig. 7
Stufe I1.800/min
Stufe II 4.700/min
Stufe III 8.500/min
A
B
C

-4-
40
50
2
1
2
1
50 40
AB
15
00 100
21
000 2000
31
500 3000
Wmgslgks rtkögfkg sjsf eoutg igjgj
kfjkfgjk kfjkjk igjij wer fpig ijgvigjv idvj
eipwi piedpii ppiipi sdgpsgp jgsigjsi
üooo ssüogksog osdgks
rjgöobjsö psdoss psodp gji
AB
15
00 100
21
000 2000
31
500 3000
Wmgslgks rtkögfkg sjsf eoutg igjgj
kfjkfgjk kfjkjk igjij wer fpig ijgvigjv idvj
eipwi piedpii ppiipi sdgpsgp jgsigjsi
üooo ssüogksog osdgks
rjgöobjsö psdoss psodp gjigp s
0
10
20
30
40
50
1
2
3
o
ed
ü
ö
ö
p
ooo ss
ö
objs
s
o
e
o
o
rjg
g
ö
fj
ed
ü
k
eip
jg
mgslgks
kfgjk
m
k
Wm
kfjk
ü
m
m
3
Wm
ü
10
31
3
wi pie
oo
kg
jk kfj
pwi pi
5
21
0
2
gks
kfgjk k
15
3
15
m
3
10
3
gjigp s
pg gp
sf e
wer fpig
piipi sd
gjsi
po
d
igj jv id
dpii pg
jsi
kg sjsf eoutg igjgj
jij we gj
v
pii pp
ogkso
kso dgks
psdoss pso
utg ig
gi
jgvigj
sgp
igj
gp jgsi
psodp
dp
dp gji
500
ks
pd
2000
03
0
dvj
kfjkfgjk kfjkjk igjij wer fpig ijgvigjv idvj
eipwi piedpii ppiipi sdgpsgp jgsigjsi
ogksog osdgks
ö
pig
pi sdgps
go
sdgk
ss
3000
fjkjk igj
d
000
gfkg
j
01
00
000 20
50
00
300
ö
rtk
fjkjk
AB
500
0
ks rtk
A
5
00
500
B
01
00
50
40
30
2
0
2
1
3
0
10
20
30
40
50
0
50
40
30
Fig. 8Fig. 9
Fig. 10 Fig. 11

-11-
Translation of the
Original Operating Instructions
GB Safety regulations
Read all safetywarnings and instructions.
Failure to follow all safety warnings and
instructions listed below may result in elec-
tric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Attention !

-12-
For use in dry environments only
Protection class II device
Please do not dispose offthe machine!
General measuring uncertainty K=3 dB
Noise/vibration information
The information on vibration and noise emission
has been determined in compliance with the pre-
scribedstandardised and normative measuring
methods and can be used to compare electrical
devices and tools with each other.
These values also allow apreliminary evaluation
of the loads caused by vibration and noise emis-
sions.
Warning!
Depending on the operating conditions while oper-
ating the device, the actually occurring emissions
could differ from the values specified above!
Please bear in mind that the vibration and noise
emission can deviate from the values given in
these instructions, depending on the conditions of
use of the tool. Poorly maintained tools, inappro-
priate working methods, different work pieces, too
high afeed or unsuitable work pieces or materials
or unsuitable bits and cutters (here: saw blade)
can significantly increase the vibration load and
noise emission across the entire work period.
To more accurately estimate the actual vibration
and noise load, also take the times into considera-
tion where the device is switched off, or is running
but is not actually in use. This can clearly reduce
the vibration and noise load across the entire work
period.
Warning:
•Ensure regular and proper maintenance of your
tool
•Stop operation of the tool immediately if exces-
sive vibration occurs!
•Unsuitable bits and cutters can cause excessive
vibration and noises. Only use suitable bits and
cutters!
•Take breaks if necessary when working with the
device!

-13-

-14-
Maintenance, cleaning and care
Disconnect the mains plug prior to every adjust-
ment, maintenance measure or repair!
Note:
Every device is dirtied by dust when working. Clean-
ing is therefore essential. To ensure along service
life, however,the machine should be cleaned with a
soft cloth or brush after each use.
Mild soap or other suitable cleaning agent may be
used in this context. Solvents or cleaning agents
containing alcohol (e.g. petrol, cleaning alcohols,
etc.) should be avoided, since these can attack plas-
tic casings.
The apertures required for cooling the motor must
always be kept free of dust and dirt.
Accessories
For more detailed information on accessories,
please request our device catalogue from the ad-
dress specified on the last page in the warranty in-
formation.
Please note in general:
Proxxon bits and cutters have been designed to
work with our machines, which makes them optimal
for their use.
Attention!

-15-
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: TBM 220
Article No.: 28128
In sole responsibility,wedeclarethat this pro-
duct conforms to the following directives and
normative documents:
EU EMC Directive 2014/30/EU
DIN EN 55014-1 /05.2012
DIN EN 55014-2 /01.2016
DIN EN 61000-3-2 /03.2015
DIN EN 61000-3-3 /03.2014
EU Machinery Directive 2006/42/EU
DIN EN 62841-1 /07.2016
Date:
10.08.2017
Dipl.-Ing. JörgWagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical
with the signatory.
We will not assume any liability whatsoever for the
safe and proper function of our devices when using
third-party bits and cutters!
Service note
Please note: The mains power input may only be re-
placed by our Proxxon Service Department or a
qualified specialist!

65
64
63
62
61
60
59
58
57
49
48
20
39
38
37
36
36
35
34 33
18
47
46
45
44
42
41 32
71
67
31
28
27
26
25
24
23
22
21 68 13
15
69
14
17
13
16
12
10
9
70
7
6
5
4
3
2
1
11
29
27
30
40
43
56
55
54
53
52
51
5o
-66-

- 67 -
Spare Parts List
PROXXON TBM 220

GB Service note
All PROXXON products are thoroughly inspected after production.Should a defect
occur nevertheless, please contact the dealer from whom you purchased the
product. Only the dealer is responsible for handling all legal warranty claims
which refer exclusively to material and manufacturer error.
Improper use, such as capacityoverload, damage due to outside influences
and normal wear are excluded from the warranty.
Youwill find further notes regarding "Service and Spare Parts Management" at
www.proxxon.com.