Pruveeo MX2 User manual

© 2018 PRUVEEO All Rights Re s er v ed .
1
PRUVEEO
USER MANUAL

© 2018 PRUVEEO All Rights Re s er v ed .
2
Safety information
To prevent injury to yourself or others, or damage to your device, read all safety
information before using.
Warning
Failure to comply with safety warnings and regulations can result in serious injury or
death.
PRUVEEO Dash Cam is not intended to be touched, modified, or calibrated while
operating a vehicle. PRUVEEO is not responsible for any damages resulting from the
user's misuse of the camera.
Do not use damaged power cords or plugs, or loose electrical sockets. Faulty connections
can cause electric shock or fire.
Do not touch the car charger with wet hands or disconnect the charger by pulling the
cord. Doing so may result in electrocution.
Do not use a bent or damaged car charger. Doing so may cause electric shock or fire.
Do not use your device while it is charging or touch your device with wet hands. Doing so
may cause electric shock.

© 2018 PRUVEEO All Rights Re s er v ed .
3
Use only manufacturer-approved chargers, accessories, and supplies.
- Use only the manufacturer-approved charger specifically designed for your device. Using
an incompatible charger can cause serious personal injury or damage to your device.
- PRUVEEO cannot be responsible for the user's safety when using accessories or supplies
that are not approved by PRUVEEO.
Do not drop the charger or device, or subject them to impact. Handle and dispose of the
charger and device with care.
- Never crush or puncture the device.
- Never dispose of the device in a fire.
- Never place the device in or on heating devices, such as microwave ovens, stoves, or
radiators. The device may explode if overheated. Follow all local regulations when
disposing of a used device.
- Avoid exposing the device to high external pressure, which can lead to an internal short
circuit and overheating.
Protect the device and charger from damage.
- Avoid exposing your device to excessive cold or heat. Extreme temperatures can damage
the device and reduce the charging capacity and life of your device.
- Do not allow children or animals to bite or chew the device. Doing so can result in fire or
explosion, and small parts can be a choking hazard. If children use the device, make sure
they use the device properly.
- Never use a damaged charger.

© 2018 PRUVEEO All Rights Re s er v ed .
4
Caution
Failure to comply with safety precautions and regulations can result in property damage,
serious injury or death.
Do not use your device near other electronic devices. Most electronic devices use radio
frequency signals. Your device may interfere with other nearby electronic devices.
Do not use your device near other devices that emit radio signals, such as sound systems
or radio towers. Radio signals from these may cause your device to malfunction.
Do not expose the device to heavy smoke or fumes. Doing so may damage the outside of
the device or cause it to malfunction.
If you notice strange smells or sounds coming from your device, or if you see smoke or
liquid leaking from the device, stop using the device immediately and take it to a
PRUVEEO Service Center. Failure to do so may result in fire or explosion.
For your own safety, do not operate the controls of this product while driving. The
window mount is needed when using the dash cam in a car. Make sure that you place the
dash cam in a location where it will not obstruct the driver's view.
Always keep the camera lens clean, and ensure that the lens is not blocked by any object
or placed near any reflective material. If the car's windshield is tinted with a dark coating,
recording quality may be affected.

© 2018 PRUVEEO All Rights Re s er v ed .
5
Your device is recommended for use and store within a temperature range of 15 degrees
Fahrenheit to 150 degrees Fahrenheit, and a humidity range of 10% to 80%.
If your device becomes overheated, allow it to cool down before use. Prolonged exposure
of skin to an overheated device may cause low-temperature burn symptoms, such as red
spots or areas of darker pigmentation.
Install mobile devices and equipment with caution.
- Ensure that any mobile devices or related equipment installed in your vehicle are
securely mounted.
- Avoid placing your device and accessories in or near an airbag deployment area.
Improperly installed wired equipment can cause serious injury in a situation where airbags
inflate rapidly.
Do not drop your device or subject your device to impact. If the device is bent, deformed
or damaged, malfunction may occur.
Do not attempt to disassemble, repair, or modify your device.
- Any changes or modifications to your device can void your manufacturer's warranty. If
your device needs servicing, take it to an authorized PRUVEEO Service Center.
Clean your device and charger by wiping with a towel or eraser. Do not use chemicals or
detergents. Doing so can discolor or corrode the outside of the device, and may result in
electric shock or fire.
Do not distribute copyright-protected material. Doing so without the permission of the
content owners may violate copyright laws. The manufacturer is not responsible or liable
for any legal issues that result from the user's illegal use of copyrighted material.

© 2018 PRUVEEO All Rights Re s er v ed .
6
Correct disposal of this product
(applicable in countries with separate waste collection systems)
Waste Electrical & Electronic Equipment
This symbol, found on the device, accessories or accompanying literature, indicates that
the product and its electronic accessories (e.g. charger, headset, USB cable) should not be
disposed of with other household waste.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for information on where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.

© 2018 PRUVEEO All Rights Re s er v ed .
7
Disclaimer
Some content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal non-commercial use.
You may not use any content or services in a manner that has not been authorized by the
content owner or service provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service provider, you may not modify, copy,
republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
"THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." PRUVEEO DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. PRUVEEO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. PRUVEEO DOES NOT GUARANTEE THE ACCURACY,
VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE
MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL PRUVEEO BE LIABLE, WHETHER IN CONTRACT OR
TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF,
OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF
THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES."

© 2018 PRUVEEO All Rights Re s er v ed .
8
Third party services may be terminated or interrupted at any time, and PRUVEEO makes
no representation or warranty that any content or service will remain available for any
period of time. Content and services are transmitted by third parties by means of
networks and transmission facilities over which PRUVEEO has no control. Without
limiting the generality of this disclaimer, PRUVEEO expressly disclaims any responsibility
or liability for any interruption or suspension of any content or service made available
through this device.
PRUVEEO is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be
made directly to the respective content and service providers.

© 2018 PRUVEEO All Rights Re s er v ed .
9
Warm Prompt
We recommend that you carefully read this manual before using the dash cam, then read
it again with the dash cam in your hands as this will help you to familiarize yourself with
its many features. The dash cam is constantly improved over time, so the specification of
the dash cam may change.
Please note that each button has multiple functions so please be careful which buttons
you press in relation to each Mode / Function. There is no need to get frustrated because
you should only do this once in order to set it up in the way that you require.
1. Please ensure that the dash cam is SWITCHED OFF when you either insert or remove a
Micro SD Card, in order to avoid damage.
2. Please ensure that the Micro SD Card is inserted in the right way. If it is
inserted backwards, it might damage the dash cam and Card.
3. We recommend formatting the micro SD card on the dash cam before using it.
4. Adjust the position of the lens to ensure that you correctly record what you want.
5. We recommend a 32 GB Class 10 Micro SD Card for this dash cam. Please use Samsung
EVO or SanDisk High Endurance Micro SD Card. Please don't use SanDisk Ultra cards.
Dash cam only supports the micro SD card with the FAT file format, please format your
micro SD card with the FAT32 file format on your PC first.
6. In video recording mode, if you want to press Menu / Mode button, please stop
recording videos first by pressing the REC button.

© 2018 PRUVEEO All Rights Re s er v ed .
10
7. We recommend using default factory settings, once the MENU has been set, then
connect the car charger to the unit and put into the card. Once the car is started, the
unit will automatically start recording. Once the car turns off, the unit will
automatically stop recording. Please note that your vehicle’s Cigarette Lighter Sockets
do not have any power when the ignition is switched OFF.
8. This dash cam must be continuously connected to a power supply via a 5V 1A
Charger because there is no built-in battery.
9. If you turn the option of SCREEN SAVER ON, in video recording mode, when the
screen is switched Off, the dash cam is still recording. You can turn the screen on by
pressing power button.
10. If you want to playback the videos, we recommend unplugging your micro SD card
and plugging into your PC with card reader. We recommend using VLC Video player on
Windows OS, and Movist + VLC on MAC OS.
11. After several weeks of daily recording it may be necessary for you to format your
Micro TF Memory Card - if that is the case, please note that you will lose all of your
files, so please back up a copy on your computer first in a unique dash cam Folder that
you have created.
12. When your dash cam crashes / screen goes black, the phenomenon may be caused by
improper operation, crash, please press the R = Reset button, hole by the top corner,
gently with a cocktail stick. Just like you would do for a computer, printer, phone, etc.
13. We recommend formatting your micro SD card once a month, and replace the micro
SD card every three months because the memory card has a certain number of reads
and writes, if it reaches the numbers, the micro SD card can't be used.

© 2018 PRUVEEO All Rights Re s er v ed .
11
Appearance of Dash Cam

© 2018 PRUVEEO All Rights Re s er v ed .
12
Button
Functions
1
Power
* There is no built-in battery, please connect to the power cord to
turn on this dash cam.
* Press to turn the screen on / off.
2
Menu
* In standby mode, press ONE / TWICE to enter settings, press
again to EXIT.
3
Mode
Switching
/
Photo
Shooting
* Press and hold for about 3 seconds to switch between Recording
/ Playback modes.
* In Playback mode, press this button to playback / stop video.
* In Standby mode, press the button to switch to Photo Mode,
press again to take photos. Press and hold for about 3 seconds to
quit.
4
Emergency
Locking
/
OK
* Emergency Lock. Press this button to lock the current video
manually during recording.
* Press to confirm a selection while in Setting Mode.
5
Micro SD
Card Slot
Supports Micro SD cards up to 32GB, Class 10 Card is required.
6
Reset
If the dash cam stops working, press and hold this button for
about 7 seconds to reset the dash cam to default settings.

© 2018 PRUVEEO All Rights Re s er v ed .
13
7
AV-OUT
Slot
For connecting with TV or other display systems with AV functions
through AV lines and displaying videos and other information in
the recorder.
8
/
11
Video
recording /
UP Button
* Press to start / stop recording.
* Press to navigate UP through options in Settings Mode.
9
Image
Switching
* Press the button to switch the image between Front, Rear, Front
and Rear, and Picture in Picture.
10
Audio
recording /
Down
Button
* Press to mute / un-mute the microphone during recording.
* Press to navigate DOWN through options in Settings Mode.
12
USB Slot
It serves as the interface for charger when charging.
13
HDMI Slot
Not Applicable.
Please insert the micro SD card as below.

© 2018 PRUVEEO All Rights Re s er v ed .
14
Operation Instructions for Main Functions
Date / Time Setup
1. Stop recording first, press MENU button TWICE to enter System
settings
2. Press the DOWN button to navigate to the "Date/Time" option
3. Press OK to enter date/time settings
4. Press the UP or DOWN button to change the highlighted number
5. Press OK to move to the next date/time segment and repeat step 4
6. Press OK again to confirm your entry
7. Press MENU to exit Date / Time Settings
Note: If the battery remains fully discharged or is removed from the
device, the time and date will be reset.
Emergency Lock
When recording the video, press [Emergency Locking / OK] to start the
emergency lock, and the current video clip is stored as a protected file.
One-click Silent Mode
When recording the video, if you do not want to record the sound, press
[MIC] key to start mute mode, then the recording mark on the top of the
screen turns to the silent mark. Press again to turn the recording
function.
Video Record function
In standby mode, press the [REC] button to start recording, press the
[REC] button again to stop recording.

© 2018 PRUVEEO All Rights Re s er v ed .
15
Resolution
Recommend setting: 720P
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Resolution" option
3. Press OK to view available resolutions: 720 / WVGA / VGA
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Loop Recording
Recommend setting: 1 Minute
With Loop Recording Mode enabled, the device will continuously erase
older video as it records new video, keeping only the images captured
over a user-selected time range. All video older than this range will be
replaced with new video. (Note: any locked video files on the memory
card will remain protected, and will not be automatically deleted during
Loop Recording.)
It is recommended that you reformat a memory card after every time
that images are transferred from it to a computer, or at least once a
month. This keeps important elements of data and file structure clean,
helping to prevent error messages and missing images.
Remember to always make backup copies of all important data stored
on the device. The manufacturer’s warranty does not cover loss of data
resulting from user actions.

© 2018 PRUVEEO All Rights Re s er v ed .
16
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Loop Recording"
option
3. Press OK to view the current selection: 1 minute / 2 minutes / 3
minutes
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Loop Recording Settings
Date Stamp
You have the option to display the date and time in your videos. Note
that the date and time stamp cannot be removed from videos if this
feature was enabled at the time of recording.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Date Stamp"
option
3. Press OK to view the current selection
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Date Stamp Settings

© 2018 PRUVEEO All Rights Re s er v ed .
17
Light Frequency
Recommend setting: 60Hz
This option should be set according to the power supply specification
used in your country or geographical region (U.S. users should select the
"60Hz" option).
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Frequency" option
3. Press OK to view the current selection: 50Hz / 60Hz
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Frequency Settings
Screen Saver
Recommend setting: 3 Minutes
Select a time duration for the screen to stay lit after recording starts.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Screen Saver"
option
3. Press OK to view the current selection: Off / 1 minute / 2 minutes / 3
minutes
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Screen Saver Settings

© 2018 PRUVEEO All Rights Re s er v ed .
18
Automatic Power Off
When enabled, this option allows the device to shut down automatically
if Recording Mode is not engaged.
1. Press MENU twice to enter settings
2. Press the UP or DOWN button to navigate to the "Automatic power
off" option
3. Press OK to view the current selection: Off / 1 minute / 3 minutes
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Automatic Power Off Settings
Format
Performing this operation will format memory card. Note: any files in
the memory card will be lost.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Format" option
3. Press OK to view YES / NO confirmation for this operation
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings

© 2018 PRUVEEO All Rights Re s er v ed .
19
Contact US
Website: www.pruveeo.us
Email: [e-mail]
Office Address: 5688 Whitehorn Way, Blaine, WA 98230
If you have any question, please contact us with no hesitation at
[e-mail] for quick solutions. Every customer contact will be
issued within 24 hours.