PSC QS200 Owner's manual

QS200
Programming Manual
v 2.1
Handheld Scanner

PSC Inc
959 Terry Street
Eugene, Oregon 97402
Telephone: [phone]
Fax: [phone]
All rights reserved. No part of the contents of this documentation orthe procedures described therein may be
produced or transmitted in any form or by any means without prior written permission of PSC Inc. Owners of
PSC Inc.'s products are hereby granted non-exclusive, revocable license to reproduce and transmit this docu
mentation for the purchaser's own internal business purposes.Purchasershall notremove oralter any propri
etary notices, including copyright notices, contained on this documentation and shallensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting PSC Cu
s
tomerAdministration.Electronicversions willeitherbedownloadablefromthePSCwebsite(www.pscnet.co
or provided on appropriate media. If youvisit our web site andwould like to make comments or suggestions
about this or other PSC publications, please let us know viathe “Contact PSC” page.
Disclaimer
Reasonable measures have been taken to ensure that the information included in this
manual is complete and accurate. However, PSC reserves the right to change any
specification at any time without prior notice.
PSC and the PSC logo are registered trademarks of PSC Inc. All other trademarks and trade names referred
herein are property of their respective owners.
Copyright
This manual is copyrighted by Adascan and reprinted with permission by PSC, Inc.

TABLE OF CONTENTS
Introduction
FlowChart 1
Interfaces 2
On/OffSymbologies 3
Code 39 7
Codabar/NW7 8
Interleaved 2/5 9
Standard 2/5 11
Matrix2/5 12
EAN-13/EAN-8 13
UPC-A/UPC-E 14
CHINESE POSTAL 2/5 15
Reading Modes 16
General Parameters 17
Keyboard Parameters 20
Terminal Type 21
Function Key Setting 23
Function Key Table 24
Function Key Labels 25
Languages 27
i


RS232 Parameters 28
CCD Wand Emulation 31
OCIA Types 32
Magnetic Setting 33
Code Mark 34
Truncate Digits 36
ASCII Table 38
Hexadecimal Labels 39
Pinout Assignments 40
Notes:
1. Options marked by { } are
only available for some models.
2. Factory default values are
indicated by

.
3. All references to numbers in this
menu are in Decimal, but you
MUST input it as Hexadecimal.
Ii


INTRODUCTION
Bar Code devices provide an
accurate, easy, and fast
method of data entry and data
storage for computerized
information systems.
The products we are offering
now can be integrated into any
host computer system by the
following ways:
Keyboard emulation
Wand emulation
RS-232C serial asynchronous
Dual RS-232C
RS-422
RS-485
Parallel
OCIA
OTHERS
All the operating parameters
are programmed by bar code
programming menu and stored
in non-volatile RAM which
can retain the settings
after power is turned off.
For the functions which are
not listed in this menu,
please consult your supplier
for more details.
*All rights reserved, including
those to reprint this manual.


-1- FLOWCHART
START OF CONFIGURATION
ABORT CONFIGURATION *
SELECT INTERFACES
SELECT SYMBOLOGIES
OPERATION PARAMETERS

END OF CONFIGURATION **
SET FACTORY DEFAULTS **



SHOW VERSION

* Reject new settings & end.
** Accept new settings & end.


INTERFACES - 2 -

KEYBOARD

RS232C

CCD WAND EMULATION

{OCIA}

RESERVED 1

RESERVED 2
To choose an Interface,
e.g. KEYBOARD:
1. Scan START OF CONFIGURATION
2. Scan KEYBOARD
3. Scan END OF CONFIGURATION


- 3 - SYMBOLOGIES
CODE 39

OFF 

ON

INTERLEAVED 2 OF 5


OFF


ON
STANDARD 2 OF 5


OFF


ON
MATRIX 2 OF 5


OFF


ON
CODABAR

OFF 

ON



SYMBOLOGIES - 4 -
EAN-8

OFF 

ON

EAN-13/UPC-A

OFF 

ON

UPC-E

OFF 

ON

ISBN/ISSN


OFF


ON
EAN/UPC ADDON 2/5


OFF


ON


- 5 - SYMBOLOGIES
CODE 128

OFF 

ON

CODE 93


OFF


ON
CHINESE 2 OF 5


OFF


ON
{MSI/PLESSEY}


OFF


ON
{CODE 11}


OFF


ON


SYMBOLOGIES- 6 -
{PHARMACEUTICAL CODE}


OFF


ON
{CODE IV}


OFF


ON
{CODE49}


OFF


ON
ItallianPharmaCode
“A”

OFF


ON
EAN-8 TO EAN-13


OFF


ON
In order to enable Italian PhamaCode,
PHARMACEUTICAL CODE should also be
enabled.


- 7 - CODE 39
TYPE

STANDARD 

FULL ASCII

TRANSMIT START/STOP CHAR


OFF


ON
VERIFY CHECKSUN


OFF


ON
TRANSMIT CHECK CHAR


OFF


ON
CODE39 LABEL ID


OFF


ON


CODABAR/NW7 - 8 -
TRANSMIT START/STOP


OFF


ON
TYPE OF START/STOP

ABCD/ABCD 
ABCD/TN

E


abcd/abcd


abcd/tn

e
TRANSMIT CHECK DIGIT


OFF


ON
VERIFY CHECK DIGIT


OFF


ON


- 9 -INTERLEAVED 2 OF 5
BAR CODE LENGTH

MINI. TO MAXI. = ? <6-32>

MINI.=2. MAXI.=32


CUSTOM DEFINE

3 SETS AVAILABLE

TRANSMIT CHECK DIGIT


OFF


ON
VERIFY CHECK DIGIT


OFF


ON


INTERLEAVED 2 OF 5- 10 -
To choose BAR CODE LENGTH, e.g.
10 - 20, (0A,14 in Hex):
1. Scan START OF CONFIGURATION
2. Scan BAR CODE LENGTH
3. Scan 0 A 1 4 SET
4. Scan END OF CONFIGURATION
CUSTOM DEFINE, user may choose
1 to 3 individual lengths,
excluding the range between,
e.g. user wants lengths of 12,
16 and 20: (0C, 10 and 14 in Hex)
Use above example except:
No. 2. Scan CUSTOM DEFINE
No. 3. Scan 0 C 1 0 1 4 SET


- 11 -STANDARD 2 OF 5
BAR CODE LENGTH

MINI. TO MAXI. = ? <6-32>

MINI.=2. MAXI.=32


CUSTOM DEFINE

3 SETS AVAILABLE

TRANSMIT CHECK DIGIT


OFF


ON
VERIFY CHECK DIGIT


OFF


ON
See example on page 10


MATRIX 2 OF 5- 12 -
BAR CODE LENGTH

MINI. TO MAXI. = ? <6-32>

MINI.=2. MAXI.=32


CUSTOM DEFINE

3 SETS AVAILABLE

TRANSMIT CHECK DIGIT


OFF


ON
VERIFY CHECK DIGIT


OFF


ON
See example on page 10


- 13 - EAN-13/EAN-8
EAN-13
TRUNCATE LEADING DIGIT

S

 = ?

0

TRANSMIT CHECK DIGIT


YES


NO
EAN-8
TRUNCATE LEADING DIGIT

S

 = ?

0

TRANSMIT CHECK DIGIT


YES


NO
Example: user wants to truncate 1
(the first leading digit):
1. Scan START OF CONFIGURATION
2. Scan TRUNCATE LEADING DIGIT
3. Scan 0 1 SET
4. Scan END OF CONFIGURATION


UPC-A/UPC-E - 14 -
UPC-A
TRUNCATE LEADING DIGIT

S

 = ?

0

TRANSMIT CHECK DIGIT


YES


NO
UPC-E
TRUNCATE LEADING DIGIT

S

 = ?

0

TRANSMIT CHECK DIGIT


YES


NO
UPC-E TO UPC-A

YES 

NO

See example on page 13


- 15 - CHINESE 2 OF 5
BAR CODE LENGTH

MINI. TO MAXI. = ? <6-32>

MINI.=2. MAXI.=32


CUSTOM DEFINE

3 SETS AVAILABLE

TRANSMIT CHECK DIGIT


OFF


ON
VERIFY CHECK DIGIT


OFF


ON
See example on page 10