PTZOptics PT-CM-1-BK User manual

Rev 1.1 1/16
PTZ Optics Universal Ceiling Mount
Model Number: PT-CM-1-BK
Flush Ceiling Mount Installation Manual

ii Rev 1.0 10/15
What’s Included
Ceiling Bracket, Qty. 1
Camera Bracket Qty. 1
Qty. 2 ¼-20 Camera mounting screw
Qty. 3 M3 x 6mm safety screw
Qty. 2 #6-32 x 1” U.S. box mounting screw
Qty. 2 #8-32 x 1” U.S. box mounting screw
Qty. 2 M3.5 x 25mm European box mounting screw
Qty. 2 #10 x 1-1/4” cap screw
Qty. 2 #10-12 x 1” conical plastic anchor

1 Rev 1.1 1/16
Set-Up Instructions
1. Mount ceiling bracket directly to ceiling or to electrical box using hardware provided:
Wood ceiling – Qty. 2 #10 x 1-¼ cap screw
Dry wall ceiling – Qty. 2 #10 x 1-¼ cap screw and Qty. 2 #10–12 x 1” conical anchor
U.S. single gang device box – Qty. 2 #6-32 x 1”
U.S. 4” round, square or octagonal junction box – Qty. 2 #8-32 x 1”
European electrical box – Qty. 2 M3.5 x 25mm
2. Mount camera bracket to camera base with included ¼-20 screw. Do not bottom out ¼-20 screw in camera
body. Use washers as spacer as necessary.
3. Connect the two brackets by sliding the camera and camera bracket into the ceiling bracket. Screw in
the 3 safety screws to ensure the mounts do not disconnect.
Safety Screw
Safety Screw
Safety Screw

2 Rev 1.1 1/16
Installation example