involight RX300HP User manual

TPL-069 LED Treo-Scanner Manual
Our LED Treo-scanner light offers many wonderful effects which are very magic. It is designed for professional places, such as stages,
disco, night clubs etc. please read the manual before operation.
A. SPECIFICATION
1. Weight: 4.5kgs
2. Size:410*410*210mm
3. Power input:AC 120/240V,60/50HZ
4. Wattage:45W
5. LEDS:12*3W RGBW(R:3,G:3,B:3,W:3)
6. Built-in program,Auto running,Sound active, DMX mode,M/S.
7. Two sound active modes optional
8. LED display for easier operation
9. LEDs running speed, motors running speed and motors retention time adjustable
10. Very sharp and beautiful laser beams effects
11. Inner box: 46.5*46.5*36.5cm
12. Master carton: 48.5*48.5*56cm
13. 2 pcs/ctn
B. OPERATION:
1.Built-in programs
1、Press MODE button ,enter the built-in program menu“Pr.××”。
2、Press UP or DOWN button ,select the effect program Pr.01~Pr.15。
3、Press SETUP button ,enter setup speed program menu “SP××”。
4、Press UP or DOWN button ,setup speed value SP01~SP100（FL）。
5、Press SETUP button ,enter setup flash memu“FS××”。
6、Press UP or DOWN button ,setup flash value FS00~99。
2.Auto run mode
1、Press Mode button ,enter auto run mode“AUTO”。
2、Press SETUP button ,enter setup auto run mode program “n.×××”。
3、Press UP or DOWN button ,enter setup auto run mode value n.001~n.100。
4、Press SETUP button ,enter setup auto run mode speed menu“SP××”。

5、Press UP or DOWN button ,setup speed value SP01~SP100（FL）。
6、Press SETUP button ,enter setup auto run mode flash menu “FS××”。
7、Press UP or DOWN button ,setup flash value FS00~99。
3.DMX mode
1、Press MODE button ,enter DMX control running mode menu “d.×××”。
2、Press UP or DOWN button ,setup DMX address value d.001—d.512。
3、Press SETUP button ,enter setup DMX mode d.-××
4、Press UP or DOWN button ,setup DMX mode d.-P1~d.-P2.
4.DMX value as follows:
DMX mode 1：d.-P1
CH1
CH2
CH3
CH4
NO.
DMX value
LEDs
Programs
LEDs running
speed
LEDs flash
frequency
Motor running
speed
1
0
OFF
NO USE
NO USE
SPEED 0--255
2
1--10
PROGRAM01
SPEED 0--255
FLASH 0--255
3
11--21
PROGRAM02
4
22--32
PROGRAM03
5
33--43
PROGRAM04
6
44--54
PROGRAM05
7
55--65
PROGRAM06
8
66--76
PROGRAM07
9
77--87
PROGRAM08
10
88--98
PROGRAM09
11
99--109
PROGRAM10
12
110--120
PROGRAM11
13
121--131
PROGRAM12
14
132--142
PROGRAM13
15
143--153
PROGRAM14
16
154--164
PROGRAM15
25
165--255
Sound Mode
Sensitivity
0--255

DMX MODE 2：d.-P2
CH1
CH2
CH3
NO.
DMX Value
LEDs Programs
LED Flash
frequency
Motor running
speed
1
0
OFF
NO USE
SPEED 0--255
2
1--10
R
FLASH 0--255
3
11--21
G
4
22--32
B
5
33--43
W
6
44--54
RG
7
55--65
RB
8
66--76
RW
9
77--87
GB
10
88--98
GW
11
99--109
BW
12
110--120
RGB
13
121--131
RGW
14
132--142
RBW
15
143--153
GBW
16
154--164
RGBW
17
165--255
Sound Mode
Sensitivity
0--255
1.Master /Slave mode
Press MODE button ,enter slave mode “SLAV”。
When the Master on the buil-in program .Auto run mode or sound active mode ,all the effects and mode is the same with the slave one .
2.Sound active mode
1、Press MODE button ,enter the sound active mode“SOUN”。
2、Press SETUP button ,enter setup sound active mode and the sound active sensitive menu “S×.××”。
3、Press UP or DOWN button more than 3 seconds then release ,setup sound active mode S1.×× or S2.×× 。
4、Press UP or DOWN button ,setup sound active mode value S1.00~S1.31or S2.00~S2.31。