PULSE+ GSM Gateway User manual

GSM Gateway
Operation Manual
1 port
4 ports / 8 ports

§ INDEX §
1. Preface......................................................................................................................... 1
2. Function Interpretation................................................................................................ 1
3. Part Of Equipment..................................................................................................... 2
4. Dimen ion Drawing .................................................................................................... 3
5. Demon tration on Double Side of Equipment .......................................................... 4
6. In tall Line Connection ............................................................................................. 6
7. Set the Allow-to-Dial Code ........................................................................................ 7
8. Code Conver ion Setting ............................................................................................ 8
9. Cancel Code-Conver ion ............................................................................................ 8
10. Set Parameter ............................................................................................................ 8
(1)Set GSM dial-out code amount .............................................................................. 8
(2)Polarity rever ing function ..................................................................................... 8
(3)Definition of DTMF rever ing ignal..................................................................... 9
(4)Limit of communicating time................................................................................. 9
(5)GSM function of dialing out the prompt tone ........................................................ 9
(6)When not connecting to Telephone Office line, GSM will provide the forced
dial-out function .......................................................................................................... 9
(7)Set up GSM extra dialing local code.................................................................... 10
(8)Voice volume modulation .................................................................................... 10
(9)Re tore default etting .......................................................................................... 10
(10)Set up extra dialing local-code to PSTN ............................................................ 11
(11)GSM imulated echo-bell- ound function.......................................................... 11
(12)GSM i n’t ready, call will be forced to dial out from PSTN.............................. 11
11.Setting of Specific Call-Tran fer *Dual band Only,Tri band and SMS ver ion
don’t have thi feature................................................................................................... 12
(1)PSTN TO GSM .................................................................................................... 12
(2)GSM TO PSTN .................................................................................................... 12
(3)GSM free tran fer etup........................................................................................ 13
12. Short Code Setting .................................................................................................. 14
13. Call-Tran fer Re triction Setting ............................................................................ 15
14. Echo Cancel Function ............................................................................................. 15
15. Q&A........................................................................................................................ 16
16 Specification ............................................................................................................ 18

Operation Manual 1
1. Preface
Congratulation ! You have elected the remarkable product “ GSM Gateway” by your
harp and intellectual judgment. Thi product will provide you the be t wire and wirele
communication ervice . Before u ing thi product, you have to read over thi Operation Manual,
letting thi product erve you with it full function , to ati fy your ideal de ire and enjoy
your elf in the wire and wirele communication applied in daily live . The product i under our
delicate de ign, which ha fulfilled the ideal way of communication expre ed on the logan of
“making wirele to wire” ver u “making wire to wirele ”. It can ave your communication
expen e and bring you an unpredictable effort u ing thi product.
2. Function Interpretation
(1) Conver ion of wire & wirele communication
We can u e GSM Gateway to apply conventional telephone et replacing cell phone to
perform ending and receiving phone call .
(2) Auto- elect economic route
From variou etting , will determine the call connected through local PSTN Line or GSM
on accordance of call number dialed therein, which can ave phone-call fee a a favorable
benefit.
(3) Through the connection toward local PSTN line, the phone call will proceed with
code-tran fer dialing proce . For example, when you dial “002”, will tran fer it to “006”
and tran mit the call through the other fixed communication network y tem .
(4) Voice volume modulating y tem
In order to cooperate with different application environment, the Wizard i capable to
modulate the voice volume of phone.
(5)MVPN Function
Provide MVPN routing according to the prefix of MVPN number for GSM carrier.

Operation Manual 2
3. Parts Of Equipment
After opening the package, plea e check whether all part attached to Wizard are
provided in the package. If there i any mi ing, plea e query the ale agent promptly to
upplement for the in ufficient part . The part on the li t are pecified below:
3.1 1 port
(1) The Main Device
(2) Tran former AC-DC (110V AC – 12V DC) or (220V AC – 12V DC)
(3) Phone connecting Line
(4) Antenna
(5) Thi Operation Manual
3.2 4 port / 8 port
(1) The Main Device
(2) Phone connecting Line (4 port 4 line /8 port 8 line )
(3) Antenna (4 port 1 et/8 port 2 et )
(4) Power cord–option European , American , Au tralian Standard
(5) Thi Operation Manual
(1)
(2)
(4)
(3)
(1)
(2)
(3)
(
4
)

Operation Manual 3
4. Dimension Drawing
4.1 1 port
4.2 4 port / 8 port
4.0cm
14.5cm
17.0cm
48cm
4.5cm
38cm

Operation Manual 4
5. Demonstration on Dou le Sides of Equipment
5.1 1 port
(1) Socket of externally connected antenna.
(2) DC 12V: power input.
(3) PHONE: Telephone/PBX connector; with tandard RJ-11 USA type plug, connected to the
phone et or PBX.
(4) PSTN phone jack : Central office line interface, tandard RJ11 phone jack.
(5) PWR LED (Power Indicator)
(6) STATE LED :
Slow fla hing :during the initialization tage.
Light up: when the phone et i picked up.
Fa t fla hing: during the GSM line in u e.
Fla h timing indicate the RSSI(received ignal trength indicator), 5 time per econd for
the tronge t receiving, 1 time per econd for the poore t receiving.
(7) PSTN LED : Fla hing during the PSTN line in u e.
(8) GSM LED : Fa t fla hing when the GSM channel i available, otherwi e, low fla hing.
** In ert the SIM card from the back (take off the lide fir t)(MT-350 1 port)
** In ert the SIM card in the front(MT-354/358 Quad/Octa Port)
Important:You must off your PIN Code of your SIM Card y your cellular phone
(1) (2) (3) (4) (5) (7)
(6) (8)

Operation Manual 5
5.2 4 port / 8 port
(1) Re et button: After changed SIM card, plea e pre re et button for 5 econd .
(2) SIM Card: Plea e in ert SIM card.
(3) PHONE: Telephone/PBX connector; with tandard RJ-11 USA type plug, connected to the
phone et or PBX.
(4) PSTN phone jack : Central office line interface, tandard RJ11 phone jack.
(5) LED
All LED indicating function are ame a 1 port GSM Gateway
(6) Switch Power: Switch the AC input voltage 110v/220v
(7) Antenna: Connecting with antenna
(8) ON/OFF: The witch of the AC power
(9) Fu e: If power failed, plea e check the fu e.
(10) AC-In: Connecting with power cord
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)

Operation Manual 6
6. Install Line Connections
6.1 1 port
Wiring Diagram
(1)Take apart your local PSTN connecting line from the phone or PBX, and connect it to the
LINE connecting lut of . If you u e to end and receive call only, then you don’t need to
connect the local PSTN line.
(2)Connect PHONE connecting lut to the inlet ide of phone et or PBX.
(3)Put in tran former power. The DC end connect to DC 12V of , and then the PW lamp on the
front ide of hould light up.
(4) will proceed with y tem detection after booting. Plea e connect the Line and Phone
correctly before energizing it. If problem i found during the y tem operation, plea e take
power ource off fir t and proce wiring ta k next.
PBX

Operation Manual 7
6.2 4 port / 8 port
※
※※
※There are no any different etween 1 port、
、、
、4 ports and 8 ports, ase on
setting.
7. Set the Allow-to-Dial Code
(1)Hold the phone and dial number following the order illu trated below:
***#nnnn#: n mean the code that allow ending call out from GSM. Hang up the phone
and the etting i thu completed. When the coding number i altered, follow the above tep
to et up again.
when nnnn is set to ※
※※
※＊＊
＊＊＊＊
＊＊, it will close the calls-sending function from GSM.
Format: ***# [waiting for confirming tone] (turn etting function on)
nnnn# [waiting for echo tone in re ponding]
Where nnnn mean the allow-to-dial prefix code, which a ***#0937, #0948# are on
behave of 0937- and 0948-; the prefix code i dialed out from GSM.
Default etting =0, all call number tarting with code “0” mean allow-to-dial code.
Sim
Phone
or PBX
ocal PSTN
A ntenna
Power cord

Operation Manual 8
8. Code Conversion Setting
Format: ###* [Waiting for confirming tone] (turn etting function on)
aaaa# [Waiting for echo tone in re ponding]
bbbb# [Waiting for echo tone in re ponding]
Where aaaa mean original code, bbbb mean converted code; the ###*002#006# mean
converting prefix code 002- to 006- automatically.
We have defined thi code dialing mechani m outputting through Telephone Office line
y tem of PSTN. If we want to output through GSM, we can et the fir t code to “*”, uch a
###*002#*006#, which mean that will auto-convert prefix code 002- to 006- and dial out
through GSM.
9. Cancel Code-Conversion
Format: ###* [Waiting for confirming tone] (turn etting function on)
**# [Waiting for echo tone in re ponding]
i to cancel code conver ion function.
10. Set Parameter
(1)Set GSM dial-out code amount
Format: *#** [Waiting for confirming tone]
71aabb#
aa mean dial-out number of call digit , bb have to be inputted in exactly identical to aa.
Example: *#**711010#, which mean etting dial-out number of call digit = 10. If correct, will
beep up once in re pon e. If not correct, will beep up four time con ecutively in tead.
Default etting =10
(2)Phone line Polarity rever ing function
Format: *#** [Waiting for confirming tone]
510101# i to turn the rever ing function off,
510202# i to turn it on (default).
Default etting = 02

Operation Manual 9
(3)Definition of DTMF rever ing ignal
Format: *#** [Waiting for confirming tone]
52aabb#
In ome region or y tem , DTMF rever ing ignal vary and can be defined by thi
function:
aa= 11 (* TONE), 12(# TONE), 13(A TONE), 14(B TONE), 15(C TONE),
00(D TONE)
bb need conforming to aa.
Default etting = 15 (C TONE)
(4)Limit of communicating time
Format: *#** [Waiting for confirming tone]
61aabb#
aa mean the communicating time in the unit of min. ( 00-99), and will how alerting ound 30 ec
ahead of di connect. bb hould be identical to aa by input. If etting to “00”, it then mean
unre tricted.
Example: *#**610505#, which mean that y tem will end out alert ound at the communicating
time of 4:30, and hang up it at about 4:55. If correct, the will beep up once in re pon e.
If not correct, the then will beep up four time con ecutively in tead.
Default etting = 00
(5)GSM function of dialing out the prompt tone, mean thi call i through GSM.
Format: *#** [Waiting for confirming tone]
530101# turn off prompt tone.
530202# turn on prompt tone (default).
Default etting = 02, turn on thi function.
(6)When not connecting to Telephone Office line(PSTN), GSM will provide the forced
dial-out function
Format: *#** [Waiting for confirming tone]
550101# turn off function of forced dial-out.
550202# turn on function of forced dial-out (default)
Default etting =02, to turn on thi function.

Operation Manual 10
(7)Set up GSM extra dialing local code
When both GSM and PSTN dial local code, the difference between them i that GSM ha
to extra dial up local code wherea PSTN need not. Thi function applie to the condition
that when PSTN ha been cut and u er dial local phone No., y tem thu will add in local
code automatically and dial out from GSM.
Format: *#** [Waiting for confirming tone]
63aabb#
aa mean code limit. There are till certain re triction when auto-adding local code, uch
a that the ervice or emergent phone call need not to add extra code dialing action. Thi
etting i that when the total phone number length inputted i horter to the etting value,
then won’t extra dial local code. bb mean local code (2~8 digital ), it i n’t contained in
the original code while dialing out through GSM, and will auto-add it in advance.
Example: *#**630604#, if the prefix code i n’t “0” (04), and total code number i n’t le
than 6, then when dialing out form GSM it will dial “04” ahead of the other
code number . If correct, the will beep up once in re pon e. If not, the then will
beep up four time con ecutively in tead.
Default etting =00, to turn off thi function.
Note: If it isn’t connecting to PSTN, then the phone won’t dial out through
GSM, in case not setting up this function and not passing through the
checking num er of allow-to-dial code.
(8)Voive volume modulation
21 aabb#
aa mean voice volume, which varie from 00-04, 00 i the bottom value and 04 i the peak one.
bb hould be externally inputted identical to aa.
Example: *#**210404#, it mean that the voice volume i et to the maximum value. If correct,
the will beep up once in re pon e. And if not, the then will beep up four time
con ecutively in tead.
Default etting =04, it mean that the maximum voice volume i et up.
(9)Re tore default etting
Format: *#** [Waiting for confirming tone]

Operation Manual 11
990909#,
the only act needed to follow i to reboot machine.
(10)Set up extra dialing local-code to PSTN
Format: *#** [Waiting for confirming tone]
11aaaaa#
aaaaa mean the digital dialed out with extra code can extend to 12 digital .
Example: *#**111805#, it mean that if the phone number i dialed out with two prefix digital
of 02-08 through PSTN, it will automatically dial out 1805 in advance. If correct,
the will beep up once in re pon e. If not correct, the then will beep up four time
con ecutively in tead.
Default etting: None.
(11)GSM imulated echo-bell- ound function
Format: *#** [Waiting for confirming tone]
57aabb
It’ the function of dialing out phone call from GSM and generate echo-bell- ound before tarting
to talk in the phone.
aa mean echo-bell- ound time in a unit of 0.1 ec. ( 00-98).
bb need to be inputted identical to aa. Thi function will di able if etting up to “00”.
If etting up to “99”, it won’t have time limit on it.
Notice: that thi echo function will be halt if there i actual echo ound, reply or voice re pon e
occurred therein.
Default etting =00 (turn off thi function).
(12)GSM i n’t ready, call will be forced to dial out from PSTN
Format: *#** [Waiting for confirming tone]
59aabb
While GSM i n’t ready, the function will let the phone forcedly dial out from PSTN.
If aa i et to “01”, it mean that the call i not to dial out through PSTN and pre ented by the tone
ignal of bu y line.
If aa i et to “02”, it mean that the phone call i forced to dial out through PSTN.
bb need to be inputted identical to aa.

Operation Manual 12
Notice: that thi echo function will be halt if there i actual echo ound, reply or voicel re pon e
occurred therein.
Default etting = 02 (forced to dial out through PSTN).
11.Setting of Specific Call-Transfer
*Dual band Only,Tri band and SMS ver ion don’t have thi feature
(1)PSTN TO GSM
The GSM GATEWAY can receive call from PSTN and end them out through GSM.
Format: *#** [Waiting for confirming tone]
80nnnn#[Waiting for echo tone in re ponding]
Where 80 are function code , nnnn mean the call number i to be dialed out.
To cancel thi function, pre *#**80**#.
Example: *#**800911123456#, repre ent that PSTN end-in call can be dialed out to
0911123456.
(2)GSM TO PSTN
(2.1)Setup GSM-to-PSTN a igned mode
Thi machine can receive call from GSM and dial them out through PSTN.
Format : *#** (Waiting for confirming tone)
81nnnn# [Waiting for echo tone in re ponding]
Where 81 are function code , nnnn mean the call number i to be dialed out.
To cancel thi function, pre *#**81**#.
Example: *#**810281112345#, repre ent that GSM end-in call can be dialed out to
0281112345.
At ome circum tance it need to add “#” in the la t digital of PSTN number.
To input it, pre “#”, and “*” to certify the input.
Example: *#**810423210287*#, it mean dialing out phone call to 0423210287#
(2.2)GSM call-Tran fer etting time to PSTN auto re pon e
When GSM phone call i dialed out through PSTN, it doe n’t have the re ponding ignal in
ome practical application and require to u e thi function to auto-re pond a few econd
later.
Format: *#** [Waiting for confirming tone]

Operation Manual 13
82aabb#[Waiting for echo tone in re ponding]
Where 82 are function code , aa repre ent time delay to auto- re pond in the unit of 0.5 ec.
bb hould be identical to aa.
Example: *#**821010#, it mean that machine will auto-re pond after 5 econd .
Example: *#**820000#, it mean that after call i dialed out, it can receive
re ponding ignal only when the other ide of call make corre ponding
ignal.
Default value: 10 ec later to auto-re pond it.
(2.3)DTMF definition of rever ed ignal
Format: *#** [Waiting for confirming tone]
52aabb#
In ome zone or y tem , variou DTMF rever ed ignal can be defined by thi
function.
aa=11 (* TONE), 12(# TONE), 13(A TONE), 14(B TONE),15(C TONE),
00(D TONE)
bb hould be identical to aa.
Default etting =15 (C TONE)
(3)GSM free tran fer etup
(3.1)Setup GSM-to-PSTN free mode
Format : *#** (Waiting for confirming tone)
81****#[ Waiting for prompt tone]
Once the GSM-to-PSTN free mode ha be et, all the incoming call from GSM will
be an wered and prompt to enter pa word. If the pa word i correct, the calling
party can hear the Bi tone, then he/ he can dial out u ing the PSTN line.
To cancel thi function, pre *#**81**#.
(3.2)GSM-to-PSTN free mode pa word etup
Format : *#** (Waiting for confirming tone)
83aaaabbbb#[ Waiting for prompt tone]
83 i the function code, aaaa i the pa word, bbbb hould be the ame a aaaa.
Example: *#**8312341234# mean the calling party need to enter 1234 for

Operation Manual 14
pa word authentication. Entering pa word ha to be done in 30
econd . If no pa word i required, pre *#**83**#
Default pa word : no pa word
(3.3)Pa word prompt tone etup
Format : *#** (Waiting for confirming tone)
84aabb#
84 i the function code, bb hould be the ame a aa
aa=11 (* TONE)，12(# TONE), 13(A TONE)，14(B TONE)，5(C TONE)，00(D
TONE)，16 No tone
Default value : 15 (C Tone)
▓Remarks
Interpretation of echo- ound
[Command confirmed]: two beep
[Setting i correct]: ingle beep
[Setting i error]: four con ecutive beep .
12. Short Code Setting
Allow to etup 100 et of hort code. Once the hort code ha been et ( ee function 31
below), u er may pre 00# ~ 99# for fa t dialing. (*0# ~ *9# are al o accepted and regard
a *00# ~ *09#). The routing function applie to the etup number rather than the hort
code it elf.
To enable/di able the hort code function :
Format : *#** (wait for confirming tone)
30aabb#
aa : 01 for di able hort code function
02 for enable hort code function
99 clear all the number a ociated with the hort code
bb : hould be the ame a aa
To et the number for hort code :
Format : *#** (wait for confirming tone)

Operation Manual 15
31aabbbbbb#
aa hould be 2 digit range from 00 to 99 a the hort code
bbbbbb : the number to be a ociated with the hort code, max. 15 digit
Notice! : the function cod 99 (re et to factory etting) doe n’t affect the hort code
number etting.
13. Call-Transfer Restriction Setting
Allow to etup 10 et of number which are allowed to do call-tran fer from mobile to
PSTN. All call from other number will tran fer to phone et.
Re trict function etting
Format : *#** (wait for confirming tone)
36aabb#
aa : 01 mean no re triction. All call from mobile will be tran ferd to PSTN
02 re trict the number et by function 37( ee a below)
99 clear all the re triction number
bb : hould be the ame a aa
Default etting : 01, all call will be tran ferred.
Re trict number etting
Format : *#** (wait for confirming tone)
37aabbbbbb#
aa hould be 2 digit range from 00 to 09 a re trict code
bbbbbb : the number to be a ociated with the re trict code, max. 15 digit
!!Note : the function cod 99 (re et to factory etting) doe n’t affect the re trict code
number etting
14. Echo Cancel Function
*#**20NNNN#
NNNN= 0101
Echo Cancel Enable

Operation Manual 16
NNNN= 0202
Echo Cancel Di able
Default: 0202
15. Q&A
Q1: “PWR” lamp doe n’t light up after power on？
A : No power tran mitted to power plug, or the tran former i mal-functioned.
Q2: No further vocal ound heard after picking up the phone？
A : Phone line i di connected or wrong wire connected.
Q3: Why the “Bu y Tone” i heard directly wile picking up phone？(Not linked to PSTN)
A : GSM i n’t ready yet, it might occur from the rea on of di connecting antenna, not able
to receive ignal or equipment mal-functioned.
Q4: How to et up allow-to-dial number？
A : Step I: connect a call receiver at phone.
Step II: lift up phone.
Step III: dial ＊＊＊＃, and et up all-to-dial code after hearing “beep” ound, then
pre ＃ again to confirm.
If we need to et up more than one allow-to-dial code , u e ＃ to eparate them off.
Ex: ＊＊＊＃0910＃ beep 0920＃ beep
It mean that the allow-to-dial number i et to 0910 and 0920.
Step IV: hang up phone peaker and the etting proce i over.
Q5: How to clear up the former etting of allow-to-dial？
A : Each new etting will auto-cover over the former two etting .
Q6: How to quick- ending out code ？
A : Pre ＃ after dialing out phone call, it will be ent out immediately.

Operation Manual 17
Q7: how many allow-to-dial code can thi machine memorize？
A : 50 et .
Q8: Can we u e to fax or make data preparation？
A : Negative, only can perform tone function exclu ively.
Q9: After etting up allow-to-dial code, why we can’t elect the allow-to-dial route?
A : (1) Check if line (PSTN) i connected properly.
(2) The allow-to-dial function ha n’t been et up yet, i.e., not to follow the correct etup
procedure proce ing etup.
(3) Thi machine derive the line malfunction in pecting ability. If the line i out of
order, it will connect to GSM route in a forced way (have to et up local code in
advance).
Q10: If the ha no power on it, and it line connect to PSTN, can it dial out?
A : Ye , it could, yet i confined to dial out by PSTN only.
Q11: Can the phone make in pection on the echo ignal of polarity rever al?
A : Ye , it could. When call i dialed out through GSM, the phone will make linear
polarity rever al when it’ called for echo re pon e.
Q12: Doe the machine de erve CLID function?
A : Ye , it doe . When GSM end in call ignal, it will end the CLID out from phone by
DTMF ignal.
Q13: How to compul orily dial out any number through GSM (VPN)?
A : We can pre ’*’ before dialing out, and dial phone number next to it. Finally, pre ‘#’
to fini h thi ta k.

Operation Manual 18
16 Specification
(1) Phone impedance: under DC 1kΩ, AC 600Ω (exclude wire impedance).
(2) Phone ignal receiving level: -3dbm～-24dbm.
(3) Phone ignal time: 50～100m .
(4) Phone frequency error: ±1％.
(5) Feed voltage: 48V.
(6) Power converter: Input:230/110 VAC 50/60 Hz 200mA，Output:12VDC,1000mA
(7) GSM pecification:
(7.1)GSM Frequency band : Dual Band EGSM 900 and GSM 1800(GSM Pha e 2+)
(7.2)GSM cla : Small MS
(7.3)Tran mit power:
Cla 4(2W) for EGSM 900
Cla 1(1W) for GSM 1800
(7.4)SIM card reader: External – connected via interface connector
(7.5)Antenna: 50Ωantenna coaxial connector
(7.6)Temperature range:
Normal operation: -20 to +55℃ ℃
Re tricted operation:-25 to ℃-20 and +55 to 70℃ ℃ ℃
Storage:-40 to +85℃ ℃