PUREGEAR PureSwitch User manual

Quick Start Guide
PureSwitch®

Control using Siri® from your
iPhone,
® iPad,
® or iPod touch®

Please note:
• Controlling this HomeKit-enabled accessory away from home requires
an Apple TV (3rd generation or later) with Apple TV software 7.0 or
later and an iPhone, iPad, or iPod touch with iOS 8.1 or later. PureSwitch
requires a WiFi connection. For indoor use only.
• Your PureSwitch™is also referred to as an accessory.
• A device refers to an iPhone,
®iPad®or iPod touch.
®
• An appliance refers to the item you are connecting to the PureSwitch,
™
such as a lamp.
Before you get started:
• Make sure you’re using iOS 8.1 or later on your device.
• Turn on your devices’ Wi-Fi.
• Plug the PureSwitch™into an outlet, and then plug in the appliance
you want to control.
Quick Start Guide
1. Download the PureSwitch™app from the app store. When asked to
access your data, select ALLOW.
2. Open the PureSwitch™App. Press +ADD HOME to create your home.
3. Press + ADD ROOM. Enter the room name, such as “Office”.
4. To pair the PureSwitch™to your network, press + ADD ACCESSORY.
You’ll see “Browsing for new accessories,” then PureSwitch-XXXXXX
(your custom six-digit alpha-numeric code) will appear.
5. You’ll see Accessory Name PureSwitch-XXXXXX. You may assign room
or add room,once completed press ADD.
6. A prompt will ask you to add accessory to network, press allow.
7. Scan your pairing code or enter it manually as noted below.
Your Pairing Code is:
8. To control your appliance, press on the On/Off toggle button.
Note: If your appliance has an on/off switch, make sure the
switch is turned ON.
Resetting the PureSwitch
If any of the steps above do not work, follow steps 1 and 2 below:
1. Press and hold down the small, round button on the bottom of the
PureSwitch for 15 seconds until the LED light switches off, then back
on again. Please wait until you hear a click.
2. Restart your iPhone,
®iPad®or iPod touch.
®
For Troubleshooting and information on Scenes, Zones and Rules,
please refer to the PureSwitch User Manual that can be found at
www.pure-gear.com/pureswitch/support

SPECIFICATIONS:
Electrical Specs
PureSwitch: Model 06158PG
Input: 100VAC-120VAC ~15A 60Hz
Output AC: 100VAC-120VAC ~15A 60Hz
Output DC: USB 5VDC / 2.1A
Operating temperature: 0-40C
Wi-Fi specs
Hardware: 88W8801 B0
Firmware: W8801-B0, RF87xx, FP76, 14.76.36.p70
Operating System: iOS: FREERTOS, version: 7.0.2
Frequency: 2.4GHz
Connectivity:
• IEEE 802.11 b/g/n Smart Energy Module
• WPA – Personal
• WPA2 – Personal
R.F Power rating: 0.177W
Certification ID: WFA61263
CAN ICES-3 (B)/NMB-3(B)
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution
Do not plug in any product except for power supply cord
(Max. 1.5m length with 1.0mm square)

pure-gear.com
©2017 F00089PG
Use of the Works with Apple HomeKit logo means that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Apple, iPhone,
iPad, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S.
and other countries. HomeKit is a trademark of Apple Inc.
Guía de inicio rápido
PureSwitch®

Controle mediante Siri® desde su
iPhone,
® iPad® o iPod touch®

Tome nota, por favor:
• Para controlar este accesorio habilitado para usarse con HomeKit fuera
de su casa, se requiere un Apple TV (3ª generación o superior) con software 7.0
o superior de Apple TV y un iPhone®, iPad®o iPod touch®con iOS 8.1 o superior.
PureSwitch requiere una conexión Wi-F Solo para uso en interiores.
• Su PureSwitch™también se conoce como un accesorio.
• Un dispositivo se refiere a un iPhone®, iPad®o iPod touch.
®
• Un aparato se refiere al elemento que usted está conectando al PureSwitch™,
como lo es una lámpara.
Antes de empezar:
• Asegúrese de que está utilizando iOS 8.1 o posterior en su dispositivo.
• Encienda El Wi-Fi de sus dispositivos.
• Enchufe el PureSwitch™en una toma de corriente, y luego enchufe el
aparato que desea controlar.
Guía de inicio rápido
1. Descargue el app PureSwitch™del App Store. Cuando se le pida tener acceso
a sus datos, seleccione ALLOW (Permitir).
2. Abra el app PureSwitch™. Pulse + ADD HOME (Añadir casa) para crear su casa.
3. Pulse + ADD ROOM (Añadir habitación). Introduzca el nombre de la
habitación, como “Oficina.”
4. Para enlazar el PureSwitch™a su red, pulse + ADD ACCESSORY (Añadir
accesorio). Verá “Browsing for new accessories” (Buscando nuevos accesorios),
luego aparecerá PureSwitch-XXXXXX (su código alfanumérico de seis
dígitos personalizado).
5. Verá el nombre del accesorio PureSwitch-XXXXXX. Podrá asignar o
añadir una habitación. Cuando termine, pulse ADD (Añadir).
6. Un mensaje le preguntará si desea añadir el accesorio a la red.
Presione ALLOW (Permitir).
7. Escanee su código de enlace o ingréselo manualmente como se indica
a continuación.
Su código de enlace es:
8. Para controlar su aparato, pulse el botón de conmutación de On/Off
(Encendido/Apagado). Nota: Si su aparato tiene un interruptor On/Off
(Encendido/Apagado), asegúrese de que el interruptor está en la
posición ON.
Para restablecer el PureSwitch
Si alguno de los pasos anteriores no funcionan, siga los pasos 1 y 2 siguientes:
1. Oprima durante 15 segundos el botón pequeño y redondo en la parte
inferior del PureSwitch hasta que la luz LED se apague y se vuelva a
encender de nuevo. Por favor, espere hasta que escuche un clic.
2. Vuelva a encender su ,
®iPad®or iPod touch.
®
Por resolución de problemas e información sobre escenas, zonas y reglas,
consulte el Manual del usuario PureSwitch que se pueden encontrar en
www.pure-gear.com/pureswitch/support

ESPECIFICACIONES:
Especificaciones eléctricas
PureSwitch: Modelo 06158PG
Entrada: 100V CA - 120V CA ~ 15 A 60 Hz
Salida de CA: 100 V CA - 120 V CA ~ 15 A 60 Hz
Salida CC: USB 5 V C.C. / 2.1 A
Temperatura de operación: 0 - 40 C
Especificaciones de Wi-Fi
Hardware: 88W8801 B0
Firmware: W8801-B0, RF87xx, FP76, 14.76.36.p70
Sistema operativo: iOS: FREERTOS, versión: 7.0.2
Frecuencia: 2.4GHz
Conectividad:
• Módulo de energía inteligente IEEE 802.11 b/g/n
• WPA – Personal
• WPA2 – Personal
Clasificación de potencia R.F. 0.177 W
ID de Certificación: WFA61263
CAN ICES-3 (B)/NMB-3(B)
Declaración de la Federal Communications Commission
Este equipo fue probado y se determinó que cumple con los límites
establecidos para un dispositivo digital Clase B, de conformidad con la
sección 15 de las reglas de la FCC. Estos límites están diseñados para
ofrecer una protección razonable contra interferencias perjudiciales
cuando el equipo se opere en una residencia. Este equipo genera, usa
y puede emitir energía de radio frecuencia, y si no se instala y usa de
acuerdo con las instrucciones podría provocar interferencia perjudicial
en las comunicaciones de radio. Sin embargo, no se garantiza que dicha
interferencia no ocurrirá en una instalación en particular. Si este equipo
ocasiona interferencia perjudicial a la recepción de radio o televisión, lo
cual se puede determinar apagando y encendiendo el equipo, se sugiere
que el usuario trate de corregir la interferencia mediante una o más de las
siguientes medidas:
• Colocar o orientar la antena receptora en otro lado.
• Aumentar la separación entre el equipo y el receptor.
• Conectar el equipo a una salida o circuito distinto al que está
conectado el receptor.
• Solicitar ayuda a su distribuidor o a un técnico de radio o televisión
con experiencia.
Advertencia de la FCC:
Cualquier cambio o modificación a esta unidad que no haya sido
expresamente aprobado por la parte responsable del cumplimiento
podría anular el permiso del usuario para operar el equipo.
Declaración de la FCC
Este dispositivo cumple con la Parte 15 de las reglas de la FCC. Su
operación está sujeta a las siguientes dos condiciones:
(1) Este dispositivo no puede causar interferencia dañina, y
(2) Este dispositivo deberá aceptar cualquier interferencia recibida,
incluyendo interferencia que pudiera causarle una operación no deseada.
Precaución
No enchufe ningún producto excepto el cable de suministro eléctrico
(Longitud máx. 1.5 m con cuadro de 1.0 mm)

El uso de Works con el logo HomeKit de Apple significa que un accesorio
electrónico ha sido diseñado para conectar específicamente al iPod, iPhone,
o iPad respectivamente, y que el diseñador ha certificado que este cumple
con los estándares de desempeño de Apple. Apple no es responsable por
la operación de este dispositivo ni por su cumplimiento con las normas
reglamentarias y de seguridad. Apple, iPhone y iPod son marcas comerciales
de Apple, Inc. registradas en EE.UU. y otros países. HomeKit es una marca
comercial de Apple Inc.
pure-gear.com
©2017 F00089PG
Table of contents
Languages: