PureLink PM-16X User manual

PM Series Matrix Router
Owner’s Manual
PM-16X
PM 16 x 16 Cross-Platform Modular Matrix Router
PureLinkTM
535 East Crescent Ave
Ramsey, NJ 07446
Tel: [phone]
Fax: [phone]
Website : www.purelinkav.com
E-mail : [e-mail]
For Technical Support, contact us at
: [e-mail]

PureLink by Dtrovision
TABLE OF CONTENTS 2
TABLE OF CONTENTS
Chapter 1. Introduction
1.1 Safety Precautions --------------------------------------------------------------------------- 4
1.2 Product Introduction ----------- --------------------------------------------------------------- 5
1.3 Front View ------------------ -------------------------------------------------------------------- 6
1.4 Rear View ----------------------------------------------------------------------------------------- 7
Chapter 2. Features and Specifications
2.1 Features ----------------------------------------------------------------------------------------- 9
2.2 Router Frame Specifications --------------------------------------------------------------- 14
2.3 Input Boards Specifications ---------------------------------------------------------------- 24
PM-HIS4 (HDMI Input Board) ---------- --------------------------------------------------- 24
PM-DIS4 (DVI Input Board) ------------------ ---------------------------------------------- 25
PM-CIS4 (CATx (HDBaseT) Input Board) ---------------------------------------------- 26
PM-FIS4 (Fiber Input Board) ---------------- ----------------------------------------------- 27
PM-SIS4 (3G/HD-SDI Input Board) ----------------- ------------------------------------- 28
PM-AIS4 (Analog VGA/Component Input Board) ------------- ----------------------- 29
2.4 Output Board Specifications ------------ --------------------------------------------------- 30
PM-HOS4 (HDMI Output Board) -------------------- -------------------------------------- 30
PM-HOS4S (HDMI Output Board w/Scaling) ------------------------------------------ 31
PM-DOS4 (DVI Output Board) ------------------------------------------------------------ 32
PM-DOS4S (DVI Output Board w/Scaling) --------------------------------------------- 33
PM-COS4 (CATx (HDBaseT) Output Board) ---------------------------------------- 34
PM-FOS4 (Fiber Output Board) ------------- ---------------------------------------------- 35
PM-SOS4 (3G/HD-SDI Output Board) ------------- ------------------------------------- 36
2.5 PM Matrix Boards and PM Extenders Compatibility Chart ------------------------- 37
Chapter 3. Installation
3.1 Package Contents ------------- ---------------------------------------------------------------- 41
3.2 Installation Environments -- ------------------------------------------------------------------ 41
3.3 Installation -------- ------------------------------------------------------------------------------- 42
a. Installing and Removing Input and Output Board ----------------- -------------- 42
b. Installing the Matrix Router in a Rack ---------------------------------------------- 44
c. Installation and Setup ------------------------------------------------------------------ 45
3.4 Cable Termination -------------- --------------------------------------------------------------- 46

PureLink by Dtrovision
TABLE OF CONTENTS 3
Chapter 4. Operation
4.1 Front Panel LCD Touch Screen Operation ---------------- ----------------------------- 49
System Information --- ------------------------------------------------------------------------ 49
Create ---------------- ---------------------------------------------------------------------------- 53
System Configuration ------------------------------------------------------------------------ 55
Preset ---------------- ---------------------------------------------------------------------------- 59
I/O Configuration ---- -------------------------------------------------------------------------- 62
EDID ----------- ---------------------------------------------------------------------------------- 66
4.2 RS-232/422 Command Line Operation ------------------------------------------------- 71
General Rules for Command Codes ----------------- ------------------------------------- 71
Command Acknowledge Value Response ----------------------------------------------- 76
Connecting Switches ------------------------------------------------------------------------ 77
Disconnecting Switches ------ --------------------------------------------------------------- 79
Connection Status Check ----- -------------------------------------------------------------- 81
Input Board Function Configuration ------------ ------------------------------------------ 81
Output Board Function Configuration ------- --------------------------------------------- 86
Audio Matrix Volume Configuration ------------------------------------------------------ 92
Router ID Check ------------------------------------------------------------------------------ 93
Firmware Version Check ------ -------------------------------------------------------------- 93
Baud Rate Setting -------------- -------------------------------------------------------------- 93
Network Configuration -------- --------------------------------------------------------------- 94
Connection Checking ------------- ----------------------------------------------------------- 94
Front Panel Touch Screen Security Lock/Unlock ---------- --------------------------- 94
4.3 LAN (TCP/IP) Operation -------------------------------------------------------------------- 95
Telnet Protocol with LAN (TCP/IP) -------------------------------------------------------- 95
HTTP Protocol with LAN (TCP/IP) --------------- ----------------------------------------- 96
Chapter 5. Additional Information
5.1 Firmware Update Instruction --------------------------------------------------------------- 98
5.2 Warranty ------------- ---------------------------------------------------------------------------- 103

PureLink by Dtrovision
TABLE OF CONTENTS 4
Chapter 1. Introduction
1.1 Safety Precautions
When using and installing Dtrovision PureLink product, adhere to the following basic safety
precautions.
 Read and understand all instructions before using and installing this product.
 The safety and operating instructions should be retained for future reference.
 Always use the correct external power supply (indicated on the product label) when
operating this unit.
 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
 Mishandling of this product may lead to a fire or explosion hazard.
 Do not place any heavy objects or equipment on top of the product.
 Keep away from wet, magnetic, and flammable surfaces or substances.
 Air vents should be kept clean and unobstructed at all times.
 Any external impact may cause damage to the operation of this unit.
 Be sure this product is properly grounded (earthed) in order to prevent the risk of
electrical shock.
 Turn off and unplug power before adding or removing Input/Output Boards.
 Input/Output Boards may be damaged when they are replaced with power turned on.
 Use surge protectors and/or AC line conditioners when powering this product.
 Only use a fuse(s) with the correct fuse rating in your enclosure.
 Make sure the product is on or attached to a stable surface.
If you experience any malfunctioning of product or have any question as to operation
of the product, please contact our customer service center.
Dtrovision LLC / PureLink
Tel: [phone]
Email: [e-mail]

PureLink by Dtrovision
TABLE OF CONTENTS 5
1.2 Product Introduction
The PM series Matrix Router is a Cross-Platform Matrix Router that supports multiple
different digital interface types in a single unit. PureLink's unique "Cross-Platform" feature
makes the Matrix Router most flexible and simple solution for today's sophisticated digital AV
environment.
The PM series Matrix Router supports seven types of digital interface:
 HDMI v1.4 (w/optional scaling)
 DVI 1.0 (w/optional scaling)
 3G/HD-SDI (standard scaling)
 Analog VGA/Component
 CATx (HDbaseT) (w/optional scaling)
 Fiber Optic (w/optional scaling)
 Displayport
Each Matrix Router is assembled from field installable I/O (Input/Output) Boards.
The PM-8X Matrix Router can support up to 2 I/O Boards of any of the above type.
The PM-16X Matrix Router can support up to four I/O Boards of any of the above type.
The PM-32X Matrix Router can support up to eight I/O Boards of any of the above type.
The PM-48X Matrix Router can support up to twelve I/O Boards of any of the above type.
The PM-64X Matrix Router can support up to sixteen I/O Boards of any of the above type.
The PM-80X Matrix Router can support up to twenty I/O Boards of any of the above type.
The PM-128X Matrix Router can support up to thirty two I/O Boards of any of the above type.
The PM-256X Matrix Router can support up to sixty four I/O Boards of any of the above type.
The Matrix Router can switch any Input signal to any combination of Outputs. For example,
HDMI Input signal can be Output to 3G/HD-SDI Output, Fiber Optic Output, and CATx Output.
The Matrix Router can route multiple Input/Output configurations simultaneously.
Note) 3G/HD-SDI is not a licensed HDCP interface and if the content received from
HDMI is protected by HDCP, there should be no Output from the 3G/HD-SDI
Board.
PM series CATx I/O Boards are used in conjunction with PM CATx Transmitter and Receiver
and PM series Fiber Optic I/O Boards are used in conjunction with PM Fiber Transmitter and
Receiver.
Note) For I/O Boards and Extenders compatibility information, see page 32

PureLink by Dtrovision
TABLE OF CONTENTS 6
1.3 Front View:
The PM Matrix Router frame is mountable on a 19'' standard rack. Touch Screen control
Panel and power switch are placed at the front panel as show in Figure 1-1
➀
➁
➂
Figure 1-1 Front view of PM-16X enclosure
➀ 7'' LCD Touch screen control panel
➁ Power On/Off switch
➂ Foldable Handle
➀
➁
➂
Figure 1-2 Front view of PM-8X enclosure
➀ Push button control panel
➁ Power On/Off switch
➂ Rack ears

PureLink by Dtrovision
TABLE OF CONTENTS 7
1.4 Rear View:
Input/Output Board section, Audio Matrix Router, communication ports, and power supplies
are placed on the rear panel as show in Figure 1-2. Actual rear view will vary depending on
the configuration of Input/Output Board type. The rear view of PM-16X in Figure 1-2 is fully
populated each of CATx Input/Output Board, Fiber Input/Output Board, DVI Input/Output
Board, and HDMI Input/Output Board in PM-16X main frame.
Figure 1-2 Rear view of PM-16X Enclosure
➀ Input Board Section (6 Board options are available)
➁ Output Board Section (7 Board options are available)
➂ Independent Audio Matrix Router (Balanced or Unbalanced), 5-pin Phoenix Connector
➃ Communication Board
➄ Standard Dual Redundant Power
➅ Audio Insertion/Extraction on Input Board
➆ Audio Insertion/Extraction on Output Board

PureLink by Dtrovision
TABLE OF CONTENTS 8
➀ Input Board Section (6 Board options are available)
➁ Output Board Section (7 Board options are available)
➂ Independent Audio Matrix Router (Balanced or Unbalanced), 5-pin Phoenix Connector
➃ Communication Board
➄ Audio Insertion/Extraction on Input Board
➅ Audio Insertion/Extraction on Output Board

PureLink by Dtrovision
TABLE OF CONTENTS 9
Chapter 2. Features and Specifications
2.1 Features
▶Cross-Platform Switching Technology
PureLink's advanced Cross-Platform Switching Technology allows interchangeable
switching between any Input signal formats to any Output signal formats. PM Matrix
Router supports HDMI v1.4, DVI, 3G/HD-SDI, VGA/Component, Fiber Optic & CATx
(HDBaseT) signal formats with various Input and Output selection.
▶Available in various I/O sizes from 4x4 to 256x256
PM series Matrix Router offers a wide range of Input/Output configuration to match
various sized installations. Total eight size of main frames are available PM-8X (up to
8x8), PM-16X (up to 16x16), PM-32X (up to 32x32), PM-48X (up to 48x48), PM-64X (up
to 64x64), PM-80X (up to 80x80), PM-128X (up to 128x128) and PM-256X (up to
256x256)
▶POE
PM series Matrix Router provides power to the PM CATx Extenders (Transmitter or
Receiver) at the remote location over the same CATx cable that transmits Audio, Video,
and Control. It eliminates the need of having a power on PM CATx Extenders. Single
CATx cable for Audio, Video, Control and Power makes installation simple.
Note) Scaling Receiver (PM-CR102) does not support POE
▶RS-232 +
An industry first, the PM series' RS-232 + simplifies the control issues that have
traditionally complicated system design, RS-232 + enables a single serial cable
connecting the controller to a PM series Matrix Router to also control the system on
three separate levels:
1) PM series Matrix Router
2) PM series CATx and Fiber Extenders (both Tx and Rx)
3) Devices attached to PM series Extenders (both Tx and Rx)
RS-232 + simplifies control within most systems, increasing reliability while also
lowering costs by removing control design, hardware and cabling.
▶Auto-Scaling with Seamless Switching
The PM series offers auto scaling on both the Router and Extender Receiver sides,
virtually eliminating latency while increasing system design flexibility. The PM series'
HDMI Output Board (PM-HOS4S), DVI Output Board (PM-DOS4S), and 3G/HD-SDI

PureLink by Dtrovision
TABLE OF CONTENTS 10
Output Board (PM-SOS4) provides auto scaling for every PM series Matrix Router.
The CATx (PM-CR102) and Fiber (PM-FR102) Extender Receivers provide auto scaling
directly driven by the PM series' Matrix Router CATx and Fiber Output Boards.
▶Flexible Input/Output Switching with Auto Distribution
Each main port on the PM series DVI, CATx, and Fiber I/O Boards also contains a
parallel HDMI port, effectively doubling those Boards' I/O capacity.
On the Input Side, the user can select either the main CATx/DVI/Fiber port or the
parallel HDMI port via the front panel or control command, providing a 2x1 switch within
the Input and thereby double the amount of Inputs.
On the Output side, the main DVI, CATx, and Fiber port and the parallel HDMI are
driven simultaneously, providing a 1x2 distribution amplifier with a mirrored Output for
each main Output.
▶Audio Insertion/Extraction
Every Video port on the PM series Matrix Router I/O Boards also provides a 3.5mm
Stereo Audio Input and Output, enabling easy extraction of 2-channel PCM Audio from
HDMI or Audio from PM Extender Transmitter, as well as insertion of a separate 2-
channel Audio signal onto HDMI, CATx, and Fiber Outputs
▶Audio Matrix Router
PM series Matrix Router frame offers independent built-in Balanced/Unbalaned Audio
Matrix Router. Depending on the frame size, it comes as a standard feature and some
of them are optional.
PM-8X-AD: Optional Internal 8x8 Audio Matrix Router for PM-8X
PM-16X-AD: Optional Internal 16x16 Audio Matrix Router for PM-16X
PM-32X-AD: Optional Internal 32x32 Audio Matrix Router for PM-32X
PM-80X-AD: Optional Internal customizable up to 80x80 Audio Matrix Router for
PM- 80X (16x16 Audio Matrix Router comes as a standard)
PM-128X-AD: Optional customizable up to 128x128 Audio Matrix Router for PM-128X
(16x16 Audio Matrix Router comes as a standard)
PM-256X-AD: Optional customizable up to 256x256 Audio Matrix Router for PM-256X
(32x32 Audio Matrix Router comes as a standard)
PM-48X comes with 48x48 Audio Matrix Router and PM-64X comes with 64x64 Audio
Matrix Router as a standard.

PureLink by Dtrovision
TABLE OF CONTENTS 11
▶Audio Attenuation and Muting
Every PM series Matrix Router allows volume attenuation and muting on the Audio
Matrix Router's Output.
▶Test Pattern Generator
Every PM series Matrix Router provides a built-in Test Pattern Generator, enabling easy
testing from the Matrix Router to the display.
▶Signal Analyzer
Every PM series Matrix Router provides built-in comprehensive signal analysis of both
incoming and outgoing signals, via the front panel LCD touch screen or control
command. Signal information provided includes EDID, HDCP, transmission status, and
resolution.
▶Preview Monitoring
Every PM series Matrix Router provides an HDMI preview monitoring port, which further
simplifies system testing by acting like an extra Video Output.
▶12.5 Gbps Data-Rate Frame
Ensures lossless High Definition digital AV signal switching and distribution.
▶Input Boards directly compatible with PM Extender Transmitters
PM CATx/Fiber Input Boards can receive signal directly from PM CATx/Fiber Extender
Transmitter, eliminating the need of matching Receiver.
▶Output Boards directly compatible with PM Extenders Receivers
PM CATx/Fiber Output Boards can send signal directly to PM CATx/Fiber Extender
Receiver, eliminating the need of matching Transmitter.
▶HDMI v1.4, 3D Support
Adopting latest HDMI version 1.4 enables to support 3D, 48-Bit Deep Color, UHD (4K x
2K) resolution (optional) and 7.1 Channel Dolby TruHD & DTS MasterHD
▶Standard Dual Redundant Power
Every PM series Matrix Router is equipped dual redundant power supply as a standard
▶Genlock for 3G/HD-SDI
PM series Matrix Router's 3G/HD-SDI Board is equipped with Genlock feature to
provide steady Video signals for optimum picture quality.

PureLink by Dtrovision
TABLE OF CONTENTS 12
▶LCD Touch-Screen Display w/ Security Lock-Out
Every PM series Matrix Router has front panel LCD Touch Screen for intuitive operation.
Security Lock-Out feature prevents unauthorized user to access to the Matrix Router.
In lock-out mode, a password entered from the touch screen or special command sent
from controller can disable the lock-out mode.
▶Auto-EDID (EDID Library, Emulation)
PureLink's EDID library and emulation features failsafe EDID capture & storage to
provide constant and continuous EDID for source devices.
▶Various Input/Output Choices
There are five Input Board types and six Output Board types to support every
conceivable digital Video format.
▶HDCP Compliant
▶Modular, Field-upgradeable
PM Matrix Router is designed to expand, upgrade, and reconfigure the Matrix Router in
the field by simply installing or replacing Input/Output Board .
▶Preset
Multiple preset switching commands can be pre-programmed and saved in the memory.
It can be recalled in the future for easy and time-saving switching use.
▶Analog Support (VGA and Component)
PM Matrix Router supports analog VGA and component signal via PM Extender
Transmitters
▶Fan, Power Supply Monitoring
PM Matrix Router provides real-time fan, power supply units status on the front panel
LCD touch screen
▶PM-Universal Input/Output Boards
PM Input/Output Boards can be used in any size of PM Matrix Router frame.
▶USB Firmware Update
Easy Firmware Update using USB port in the rear panel (no software program required)

PureLink by Dtrovision
TABLE OF CONTENTS 13
▶Three Convenient Control Methods:
Control via front panel touch screen
Control via RS-232/422C
Control via LAN (TCP/IP)
▶Maximum Distance up to 6,600ft
As part of a complete switching system, send Audio, Video, control signal and power up
to 330ft over single CATx cable to and from the PM Matrix Router using PM series
CATx Extenders and send Audio, Video, and control signal up to 6,600ft over Fiber
Optic cable to and from the PM Matrix Router using PM series Fiber Extenders.
▶Plug-N-Play
▶Standard 19'' Rack-mountable
 PM-8X (3 RU)
 PM-16X (5 RU)
 PM-32X (10 RU)
 PM-48X (15 RU)
 PM-64X (20 RU)
 PM-128X (39 RU)
 PM-256X (2 Rack wide self-standing unit, 39 RU)
▶Resolutions up to WUXGA 1920x1200, HD 1080p @ 60Hz, and 4K2K (Optional)
▶Integrated Noise-cancellation and Error-correct Logic for both Input and Output
Ports to prevent any damage caused by Electrical Noise.

PureLink by Dtrovision
TABLE OF CONTENTS 14
2.2 Router Frame Specification
PM-8X
PM-8X Frame General Specifications
Maximum # of Input Board load 2 of any kind of Input Board
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,
CATx (HDBaseT), Fiber Optic
Maximum # of Output Board load 2 of any kind of Output Board
Available Output Board HDMI, HDMI w/scaling, DVI, DVI w/scaling,
3G/HD-SDI, CATx (HDBaseT), Fiber Optic
Power External Power Supply DC12V, 6.6A
Power Consumption (max) 120W + 120W (Dual) = 240W
Operational Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Dimensions (W x D x H) 17.1'' x 14.5'' x 5.25'' (435 x 368 x 133mm)
Shipping Dimensions (with cover box) TBD
Rack mounting Yes, 19'' standard rack, 3RU
Weight (w/o Boards installed) TBD
Weight (with HDMI Boards fully installed) TBD
Shipping Weight
(with Boards fully installed, accessories,
hard metal case, and cover box)
TBD
Shipping Weight of Individual Boards 2 lbs (0.9 kg)

PureLink by Dtrovision
TABLE OF CONTENTS 15
PM-16X
PM-16X Frame General Specifications
Maximum # of Input Board load 4 of any kind of Input Board
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,
CATx (HDBaseT), Fiber Optic
Maximum # of Output Board load 4 of any kind of Output Board
Available Output Board HDMI, HDMI w/scaling, DVI, DVI w/scaling,
3G/HD-SDI, CATx (HDBaseT), Fiber Optic
Power 100-240VAC 50/60Hz
Redundant power supply is standard
Power Consumption (max) 300W + 300W (Dual) = 600W
Operational Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Cooling Fan left, right, rear
Dimensions (W x D x H) 17.1'' x 14.5'' x 8.6'' (435 x 368 x 220mm)
Shipping Dimensions (with cover box) 29'' x 19'' x 13'' (737 x 483 x 330mm)
Rack mounting Yes, 19'' standard rack, 5RU
Weight (w/o Boards installed) 20.00 lbs (9.07 kg)
Weight (with HDMI Boards fully installed) 28.20 lbs (12.4 kg)
Shipping Weight
(with Boards fully installed, accessories,
hard metal case, and cover box)
60 lbs (27.22 kg)
Shipping Weight of Individual Boards 2 lbs (0.9 kg)

PureLink by Dtrovision
TABLE OF CONTENTS 16
PM-32X
PM-32X Frame General Specifications
Maximum # of Input Board load 8 of any kind of Input Board
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,
CATx (HDBaseT), Fiber Optic
Maximum # of Output Board load 8 of any kind of Output Board
Available Output Board HDMI, HDMI w/scaling, DVI, DVI w/scaling,
3G/HD-SDI, CATx (HDBaseT), Fiber Optic
Power 100-240VAC 50/60Hz
Redundant power supply is standard
Power Consumption (max) 600W + 600W (Dual) = 1,200W
Operational Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Cooling Fan left, right, rear
Dimensions (W x D x H) 17.1'' x 14.5'' x 17.3'' (435 x 368 x 440mm)
Shipping Dimensions (with cover box) 29'' x 19'' x 24'' (737 x 483 x 610mm)
Rack mounting Yes, 19'' standard rack, 10RU
Weight (w/o Boards installed) 39.00 lbs (17.70 kg)
Weight (with HDMI Boards fully installed) 53.00 lbs (24.00 kg)
Shipping Weight
(with Boards fully installed, accessories,
hard metal case, and cover box)
67 lbs (30.40 kg)
Shipping Weight of Individual Boards 2 lbs (0.9 kg)

PureLink by Dtrovision
TABLE OF CONTENTS 17
PM-48X
PM-48X Frame General Specifications
Maximum # of Input Board load 12 of any kind of Input Board
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,
CATx (HDBaseT), Fiber Optic
Maximum # of Output Board load 12 of any kind of Output Board
Available Output Board HDMI, HDMI w/scaling, DVI, DVI w/scaling,
3G/HD-SDI, CATx (HDBaseT), Fiber Optic
Power 100-240VAC 50/60Hz
Redundant power supply is standard
Power Consumption (max) 900W + 900W (Dual) = 1,800W
Operational Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Cooling Fan left, right, rear

PureLink by Dtrovision
TABLE OF CONTENTS 18
Dimensions (W x D x H) 17.1'' x 14.5'' x 25.9'' (435 x 368 x 658mm)
Shipping Dimensions (with cover box) 29'' x 19'' x 33'' (737 x 483 x 832mm)
Rack mounting Yes, 19'' standard rack, 15RU
Weight (w/o Boards installed) 58.00 lbs (26.30 kg)
Weight (with HDMI Boards fully installed) 79.40 lbs (35.83 kg)
Shipping Weight
(with Boards fully installed, accessories,
hard metal case, and cover box)
93.40 lbs (42.36 kg)
Shipping Weight of Individual Boards 2 lbs (0.9 kg)
PM-64X
PM-64X Frame General Specifications
Maximum # of Input Board load 16 of any kind of Input Board

PureLink by Dtrovision
TABLE OF CONTENTS 19
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,
CATx (HDBaseT), Fiber Optic
Maximum # of Output Board load 16 of any kind of Output Board
Available Output Board HDMI, HDMI w/scaling, DVI, DVI w/scaling,
3G/HD-SDI, CA Tx (HDBaseT),
Fiber Optic
Power 100-240VAC 50/60Hz
Redundant power supply is standard
Power Consumption (max) 1200W + 1200W (Dual) = 2,400W
Operational Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Cooling Fan left, right, rear
Dimensions (W x D x H) 17.1'' x 14.5'' x 34.4'' (435 x 368 x 874mm)
Shipping Dimensions (with cover box) 29'' x 19'' x 46.2'' (737 x 483 x 1,173mm)
Rack mounting Yes, 19'' standard rack, 20RU
Weight (w/o Boards installed) 73.00 lbs (33.11 kg)
Weight (with HDMI Boards fully installed) 105.80 lbs (48.00 kg)
Shipping Weight
(with Boards fully installed, accessories,
hard metal case, and cover box)
119.8 lbs (54.34 kg)
Shipping Weight of Individual Boards 2 lbs (0.9 kg)

PureLink by Dtrovision
TABLE OF CONTENTS 20
PM-128X
PM-128X Frame General Specifications
Maximum # of Input Board load 32 of any kind of Input Board
Available Input Board HDMI, DVI, 3G/HD-SDI, VGA/Component,