PureMate PM 101 User manual

Massage Cushion

Thank you for
choosing this product to complement your healthcare needs.
Before using please read this user manual carefully for the correct usage and
operation of this product.
Please keep the user manual on hand for easy reference.

21
2
3
Product leather and
fastening straps (rear).
3D massage heads
DC connector
Remote control pocket
1 Massage motors
(Vibration massage)
Remote control
01

02

03
Button switch
Switch on: Press the ON/OFF power button then power light is on when the machine are on standby.
The default automatic mode: Full back walking kneading massage.
Switch off: Press power ON /OFF again to cease all operation, back rollers are homing, all the LED are
flashing simultaneously until homing is done.
Warm function button
Press heating button under the designated in the back, kneading and shiatsu model and
corresponding indicator lights.
In the meantime, vibration can also be enabled. Press the button again to close the warm function.
When fixed kneading and shiatsu massage functions are turned off, warm function is automatically
turned off.
Timing selection button
Press the timing button, selectable 10, 15, 20 minutes; the corresponding timing indicator lights.
Whole back kneading massage
In the boot state, press this button to open the whole back kneading massage function, and the
corresponding indicator lights. Massage back and forth across whole back with walking kneading
massage.
Press the button again to turn off the whole back kneading function.
Upper-back kneading massage
In the boot state, press this button to open the upper-back kneading massage function, and the
corresponding indicator lights. Massage back and forth across upper-back with walking kneading
function.
Press the button again to turn off the upper-back kneading function.
Lower-back kneading massage
In the boot state, press this button to open the lower-back kneading massage function, and the
corresponding indicator lights. Massage back and forth across lower-back with walking kneading
function.
Press the button again to turn off the lower-back kneading function.
Vibration mode button
Vibration mode button can be operated separately and massage thighs and buttocks.
In kneading and tapping massage, freely press vibration button is available.
HOW TO OPERATE

04
Width adjust function button (only refers to shiatsu mode)
This button can only be used in shiatsu mode.
Long press the button to adjust the width and the corresponding spacing will be increased and
decreased until the distance between massage head width reaches a maximum when the button is
released.
Fixed point kneading mode button
Press this button to open the fixed point kneading function.
Long press button，movement up waling and open kneading designated function.
Long press button, movement down walking and open lower back
kneading designated function.
Once releasing this button, the movement stops walking and return to the designated state kneading
massage which focus on a point in the body parts.
By doing this, user can select the location to massage.
HOW TO OPERATE
Applying the massage to the same part of the body for longer than
15 minutes may cause irritation.
Using products once regular time of 20 minutes, use again, it shall be
closed to cool at least 15 minutes.
Please make sure to remove the power supply of electrical appliance from
the outlet when not in using.
Shiatsu mode button
In the boot state, press this button to open the shiatsu mode function and the corresponding
indicator lights.
Shiatsu massage back and forth across the whole back.
Press button again to turn off the shiatsu function.
Reverse Mode Button
Press this button to turn on the reverse function and corresponding indicator lights.
Reverse massages back and forth across the back.
Press again to turn off the reverse function.

05
Before cleaning the device, make sure that it is turned off and the mains
plug is removed from the socket. Allow the unit to cool down.
Only clean the chair cover with a soft cloth slightly dampened with a mild detergent (e.g. soap suds).
Under no circumstances should you use aggressive detergents, strong brushes, solvents, petrol,
thinners or alcohol.
Rub the chair cover dry with a clean dry cloth.
When cleaning, never immerse the unit in water and make sure that no water gets into the unit.
Wait until the device is completely dry before using it again.
Undo any kinks in the cable.
You should ideally store the device in its original packaging and keep it in a clean, dry place.
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless of whether or not they
contain toxic substances, at a municipal or commercial collection point so that they can be disposed
of in an environmentally acceptable manner.
Consult your local authority or your supplier for information about disposal.
TO CLEAN AND MAINTAIN
THE PRODUCT
ATTENTION
Please make sure that do not use benzene or thinner and other
aggressive detergents to clean the product.
Or the product may fade.
TECHNOLOGY PARAMETER
Massage Cushion
PM 101
INPUT:100V-240V ; 50 H /60Hz; 0.8A
Output: DC 12V 2.5A
DC 12V 2.5A
APPROX. 30 W
z
approx.654x168x425mm
approx. 3.7 kg
Model :
10/15/20
MADE IN CHINA
Adaptor

Super Tech Health Limited
Address: 129 Shady Lane, Great Barr , Birmingham, B44 9ER
West Midlands, United Kingdom
Tel: [phone] Fax: [phone]
Website: www.puremate.co.uk Email: [email protected]