PureTools PT-HDBT-100P-TX User manual

UserManual
PT-HDBT-100P-TX
User Manual
HDBaseT Transmitter
4K (60Hz 4:2:0) with PoC switch
Model PT- HDBT-100P-TX
Designedin Germany
© 2022PureLink GmbH All rights reserved.
VersionV1.0

UserManual
PT-HDBT-100P-TX
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual are for reference only. Different model layouts andspecifications are subject
to the physical product.
This manual is for operation instructions only, not for any maintenance usage.
In the constant effort to improve our product, we reserve the right to make changes in
functions or parameters without prior notice or obligation.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior writ ten consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential areais likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture wouldvoid
the user’s authority to operate the equipment.

UserManual
PT-HDBT-100P-TX
REACH | 1907/2006/EU
ROHS | 2011/65/EU
PureLink hereby declares that this product PureTools PT-HDBT-100P-TX complies
with Directives 1907/2006/EU und 2011/65/EU.
EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive)
PureLinkGmbHherebydeclares thatthis product PureTools PT- HDBT-100P-TX
complies with Directives 2014/30/EU and 2014/35/EU. The full text of the EU
Declaration of Conformity is available at the following Internet address:
http://www.purelink.de/ce/4251364736807_CE.pdf

UserManual
PT-HDBT-100P-TX
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructionscarefully before
using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material
for possible future shipment
Follow basic safety precautions to reduce the risk of fire,electrical shock and
injury to persons.
Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result infire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleanersto clean this unit. Always unplug the power
to the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them asnormal electrical wastes.

UserManual
PT-HDBT-100P-TX
Content
1. Product Introduction...........................................................................................................
1.1 Introduction....................................................................................................................
1.2 Features............................................................................................................................
1.3 Package List.....................................................................................................................
2. Panel Description.................................................................................................................
3. Specification..........................................................................................................................
4. IR Pin Definition....................................................................................................................
5. System Diagram....................................................................................................................
6. After-Sales Service............................................................................................................
Asking for Assistance...............................................................................................................
2
2
2
2
3
4
5
6
8
9
1

1.1 Introduction
1.2 Features
•HDMI 1.4 and HDCP 2.2 compliant
•Support video resolution up to 4K@30Hz (4:4:4), 10.2Gbps maximum
video bandwidth
•Extends 1080p up to 70m and 4K up to 40m
(3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0).
•Bi-directional 12V PoC (Power over Cable)
•PoC on/off switch to enable or disable PoC function
•Bi-directional IR and RS-232 control signal pass-through
•Compact design for easy and flexible installation
1.3 Package List
User
Manual
PT-HDBT-100P-TX
2
1. Product Introduction
•1 × HDMI 70M HDBaseT Extender (Transmitter)
•1 × Power adaptor (12V DC,1A)
•2 × Mounting ears
•1 × 3-pin Phoenix connectors
•1× User Manual
The PT-HDBT-100P-TX is an HDBaseT transmitter that can extend an HDMI signal up
to 70 meters via a single Cat 5e/6 cable. The PT-HDBT-100P-TX also boasts a unique
PoC on/off switch for increased compatibility. This feature, combined with RS-232
signal pass-through, makes it ideal for direct connection to HDBaseT equipped
projectors. When used with an HDBaseT receiver, it can easily remotely control the
source device or display device via bi-directional IR signal pass-through. This product
can be widely used in video conference systems, educational environments or for
any other form of commercial HDMI signal extension.

No. Name Description
1
2
3
UserManual
PT-HDBT-100P-TX
3
2. Panel Description
7
8
6
4
5
9
10
OFFON
LINKHDCP
POC SWITCHDC 12V HDBASET OUT
RXTXIR OUTIR INHDMI IN
12345 6 78
9 10
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
HDMI In HDMI signal input port. Connect HDMI source device.
IR In
Work with far-end IR Out port, connect with 12V IR Receiver to
collect IR signal to control far-end display device from local.
IR Out Work with far-end IR In port, connect with 12V IR Blaster to
send IR signal to control input source device from remote.
RS-232
connector
Connect to control system or PC with 3-pin phoenix
connector for RS-232 command transmission.
DC 12V DC 12V power supply port. Support bi-directional POC function.
Power LED Red LED will be on when the Transmitter is powered on.
HDBaseT
Out
Connect to the HDBaseT In port of the Receiver via a
CAT5e/6 cable.
POC SWITCH Enable/disable PoC on/off switch
▪Illuminate: HDMI signal with HDCP.
▪Flash: HDMI signal without HDCP.
▪Dark: No HDMI signal.
Data Signal
Indicator lamp
(Green)
Connection
Signal Indicator
lamp (Yellow)
▪Illuminate: Transmitter and receiver are in good
connection status.
▪Flash: Transmitter and receiverare in poor connection status.
▪Dark: Transmitter are not connected.

3. Specification
UserManual
PT-HDBT-100P-TX
4
Technical
HDMI Compliance HDMI 1.4
HDCP Compliance HDCP 2.2
Video Resolutions Up to 4K×2K@30Hz 4:4:4
Connection
Input
Mechanical
224g
Input: AC100~240V 50/60Hz
Output: DC12V/1A (US/EU standards, CE/FCC/UL certified)
5.675W (Max)
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~ 140°F
ESD Protection Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Power Supply
Dimensions
Weight
Iron Enclosure
Operating Temperature
Storage Temperature
Relative Humidity 20~90% RH (non-condensing)
Power Consumption
Color Black
120mm (W)×74mm (D)×16mm (H)
Housing
Bandwidth 10.2Gbps
Transmission Mode HDBaseT
Color Space
Output
Control
1×HDMI Type A [19-pin female]
1×HDBT Out [RJ45]
1×IR In [3.5mm Stereo Mini-jack]
1×IR Out [3.5mm Stereo Mini-jack]
1×RS-232 [Phoenix connector]
YCbCr 4:2:0
Color Depth 8-bit (4K60Hz)
Audio Formats LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD,
Dolby Digital Plus(DD+)
HDR HDR, HDR10, HDR10+, Dolby Vision
Transmission Distance 1080P≤70m; 4K×2K≤40m

UserManual
PT-HDBT-100P-TX
5
4. IR Pin Definition
Recommended IR Receiver and Blaster pin’s definition as below:
IR RECEIVER
IR BLASTER
Power 12V
Griounding
IR Signal
IR RECEIVER
+
-
IR BLASTER
Note: The frequency of the blaster and receiver component and the pin out of the
IR cables is 20-60KHz.

UserManual
PT-HDBT-100P-TX
6
5. System Diagram
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
DVD or Blu-ray player
IR Receiver
IR Blaster
OFFON
LINKHDCP
POC SWITCHDC 12V HDBASET OUTRXTXIR OUTIR INHDMI IN
PC
Power Supply
Usage Precaution
• Make sure all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and
humidity.
• All of the power switches, plugs, sockets, and power cords should be insulated
and safe.
• All devices should be connected before power on
The following diagrams illustrate typical input and output connections that can be
utilized with this transmitter:

UserManual
PT-HDBT-100P-TX
7
※Application 1
Projector with RS-232 control Example (PoC OFF)
※Application 2
Bidirectional IR control Example (PoC ON )
※Application 3
Bidirectional RS-232 control Example
DVD
TV
HDMI Cable HDMI Cable
PC
Matrix
TX RX
CAT5e/6
RS-232 Cable RS-232 Cable
DVD
TV
HDMI Cable HDMI Cable
PC
Matrix
TX RX
CAT5e/6
RS-232 Cable RS-232 Cable
DC 12V 1A
CAT5e/6
PC
DC 12V 1A
CAT5e/6
RS-232 Cable

UserManual
PT-HDBT-100P-TX
8
6. After-Sales Service
1)
2)











3)
If there appear some problems when running the product, please check and deal with
the problems referring to this user manual. Any transport costs are borne by the users
during the warranty.
Product Limited Warranty: This product will be free from defects in materials and
workmanship for three years(The purchase invoice shall prevail).
What the warranty does not cover (servicing available for a fee):
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear.
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized
Any other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
Technical Support: For any questions or problems, contact your distributor or
reseller and tell them the respective product name and version, the detailed
failure situation as well as the formation of the cases.

UserManual
PT-HDBT-100P-TX
9
Asking for Assistance
Technical Support:
Phone: [phone]
Fax: [phone]
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
[email protected]