Puritron AT Series User manual

AT Series
LCD POS System
User Manual
1 ManualVersion:1.0
Release Date: April 25, 2008

2 ManualVersion:1.0
Release Date: April 25, 2008
Index of Contents
0. Before Installation……………………………………………………………...3
1. Appearance………………………………………………………………….....4
2. Hardware Installation..........................................................................................6
3. Power Control Button…………………………………………………….........7
4. I/O Connector……………………………………………………......................8
5. Touch Driver Installation………………………….…………………………...9
5.1 Liyitec Touch……………………………………………………………...9
5.2 ELO Touch……….....................................................................................14
6. Control Panel for Second Monitor……………………………………………21
5.1 Push Button……………………………………………………………..21
7. OSD Function for Second Monitor…………………………………………...22
7.1 Color.........................................................................................................22
7.2 Image Setting............................................................................................23
7.3 Position.....................................................................................................23
7.4 OSD Menu................................................................................................24
7.5 Language..................................................................................................24
7.6 MISC.…………………………………………………………………...25
8. Cleaning and Safety..........................................................................................26
8.1 Cleaning Touch LCD Monitor................................................................ 26
8.2 Screen.......................................................................................................26
8.3 Case..........................................................................................................26
8.4 Safety........................................................................................................26
Care and handling of your touch monitor……………………………27
9. Troubleshooting………………………………………………………………28
10. Specifications………………………………………………………………29
Attention
1. This manual contains important information for the proper setup and
maintenance of the products. Before setup and using of the products, please read
through this manual clearly.
2. This specification shall apply only to the product(s) coming along with
this manual inside.
3. The specification may be modified without any notice in advance. Please
inquire your supplier for latest specification, driver, or manual.

3 ManualVersion:1.0
Release Date: April 25, 2008
0. Before Installation
When unpacking please check you have the following items.
♦AT Series Machine
♦Accessory Package
¾User Manual
¾Driver CD-ROM
¾Power cord

1. Appearance
Front View
Back View
4 ManualVersion:1.0
Release Date: April 25, 2008

Left Side View
Right Side View
5 ManualVersion:1.0
Release Date: April 25, 2008

2. Hardware Installation
1. Remove right cover
2. Connect A/C power cord to the power supplier:
3. Connect the power cord to an AC power socket
6 ManualVersion:1.0
Release Date: April 25, 2008

3. Power Control Button
Reset Power on/off
7 ManualVersion:1.0
Release Date: April 25, 2008

4. I/O Connector
8 ManualVersion:1.0
Release Date: April 25, 2008
COM4 USB
LVDS for Main
Monitor
5V DC
Output
12V DC
Output Printer
PS/2 MS PS/2 KB COM3 VGA USB RJ-45 Audio Jack
COM1 &
COM2

5. Driver Installation
5.1 Liyitec Touch
1. Double click on “setup.exe” in driver folder and then press “Next” button to
start driver installation.
2. Press “Next” to continue.
9 ManualVersion:1.0
Release Date: April 25, 2008

3. Press “Next” to continue.
4. Press “Next” to continue.
10 ManualVersion:1.0
Release Date: April 25, 2008

5. Press “Next” to continue.
6. Wait the setup program copying files.
11 ManualVersion:1.0
Release Date: April 25, 2008

7. Your Touch will be shown in this form.
8. Press the “Calibration” button to process the four points calibration.
12 ManualVersion:1.0
Release Date: April 25, 2008

9. Press “OK” to finish.
13 ManualVersion:1.0
Release Date: April 25, 2008

5.2 ELO Touch
1. Insert Driver CD-ROM into CD-ROM driver. The setup program will auto run.
If the setup program does not auto run, click the “EloCD.exe” program in the
Driver CD-ROM. Press “Install Driver For This Computer” to start driver
installation.
2. Check “Install Serial Touchscreen Drivers and press “Next”.
14 ManualVersion:1.0
Release Date: April 25, 2008

3. Read the License Agreement and then press the “yes” button.
4. Wait the setup program checking serial ports.
15 ManualVersion:1.0
Release Date: April 25, 2008

5. Check “Auto-detect Elo devices” to select the COM port that connected to Elo
devices.
6. Wait the setup program searching for connected touchscreen.
16 ManualVersion:1.0
Release Date: April 25, 2008

7. Choose one COM port and press ”Next” to continue.
8. Make sure the COM port listed and press “Next” button.
17 ManualVersion:1.0
Release Date: April 25, 2008

9. Wait setup program to complete.
10. Check “Calibrate Elo Touchscreen Monitors” and press “Finish” button to
complete driver setup and start to calibrate touchscreen.
18 ManualVersion:1.0
Release Date: April 25, 2008

11. Press the targets with one finger to calibrate touchscreen.
19 ManualVersion:1.0
Release Date: April 25, 2008

12. Press the “ˇ” button to finish calibration.
20 ManualVersion:1.0
Release Date: April 25, 2008