PUSR AC1000 User manual
AC1000 User Manual
pusr.com
1
- 2 -
Content
1. Introduction ...............................................................................................................................................- 4 -
1.1. Overview...........................................................................................................................................- 4 -
1.2. Features............................................................................................................................................- 4 -
1.3. Specification .....................................................................................................................................- 5 -
1.4. Button & Indicator .............................................................................................................................- 6 -
1.5. Dimension ........................................................................................................................................- 6 -
2. Get Started.................................................................................................................................................- 7 -
2.1. Login setting webpage......................................................................................................................- 7 -
2.2. Briefs introduce of the webpage........................................................................................................- 8 -
3. Configuration and parameter details ..........................................................................................................- 9 -
3.1. System status....................................................................................................................................- 9 -
3.2. AC management .............................................................................................................................- 10 -
3.2.1. AP list ....................................................................................................................................- 10 -
3.2.2. AP settings.............................................................................................................................- 11 -
3.2.3. AP information.......................................................................................................................- 12 -
3.3. AC management via PUSR cloud...................................................................................................... - 13 -
3.3.1. AP import...............................................................................................................................- 13 -
3.3.2. AP list ....................................................................................................................................- 14 -
3.3.3. AP settings.............................................................................................................................- 15 -
3.3.4. AP information.......................................................................................................................- 15 -
3.4. Internet accessing settings ..............................................................................................................- 16 -
3.4.1. Mode selecting.......................................................................................................................- 16 -
3.4.2. Ethernet port setting ..............................................................................................................- 17 -
3.4.3. WAN settings .........................................................................................................................- 17 -
3.4.4. IP mapping ............................................................................................................................- 17 -
3.4.5. Port mapping.........................................................................................................................- 19 -
3.5. LAN network settings.......................................................................................................................- 21 -
3.6. Login settings .................................................................................................................................- 22 -
3.7. Client list.........................................................................................................................................- 22 -
3.8. Software upgrading ........................................................................................................................ - 23 -
3.8.1. Firmware upgrading ..............................................................................................................- 23 -
AC1000 User Manual
pusr.com
1
- 3 -
3.8.2. Backup ..................................................................................................................................- 25 -
3.8.3. Time & Date ...........................................................................................................................- 25 -
3.8.4. Reboot...................................................................................................................................- 26 -
3.8.5. Reset to factory setting...........................................................................................................- 26 -
3.9. System log......................................................................................................................................- 26 -
4. Warranty..................................................................................................................................................- 27 -
5. Contact Us................................................................................................................................................- 27 -
6. Disclaimer................................................................................................................................................ - 27 -
7. Revision History........................................................................................................................................- 28 -
AC1000 User Manual
pusr.com
1
- 4 -
1. Introduction
1.1. Overview
The AC1000 series features a controller with localized small to medium-sized LAN centralized configuration,
management, and status monitoring capabilities, along with integrated unified management functionality for
wired devices. It supports both AC functions, such as wireless AP management, wireless internet control, wireless
authentication management, and wireless security management, as well as centralized network control
functions, including intelligent network initialization, comprehensive network management, automatic device
discovery, and network operations and maintenance.
The product's WAN and LAN ports are designed with Gigabit Ethernet ports. Compared to traditional 100
Mbps ports, the wired transmission rate is increased by ten times, making it suitable for broadband access of 100
Mbps and above, especially for mainstream fiber optic broadband access.
The design of the product aims to provide home and small business users with a wireless coverage
experience comparable to professional commercial-grade solutions. The product's hardware and software
design balances，the professionalism of commercial WiFi network solutions with the convenience required for
small-scale applications. By streamlining the device installation and configuration steps, it is made to easily
serve home and small to medium-sized enterprise applications.
1.2. Features
⚫MTKT7621AT MIPS1004Kc (880 MHz) dual-core CPU, adopting high-performance processor can provide
more stable network and faster transmission rate.
⚫Supported standard: IEEE802.3, IEEE802.3u, IEEE802.3ab.
⚫Equipped with 1*10/100/1000M WAN, 4*10/100/1000M LAN (PoE output), auto MDI/MDIX.
⚫Metal shell can provide heat dissipation and effectively shields electromagnetic interference.
⚫Support multiple installations: Desktop, DIN rail mounting, wall mounting, 1U Rack Mount: Standard 19-
inch cabinet type(only for AC1000).
⚫Rich hardware interface: 1*USB2.0, 1*USB3.0, 1*console, 1*reload button.
⚫Manages up to 200 wireless access points, and 100 users as gateway.
⚫Support router mode and AP mode.
⚫Support DHCP, PPPoE, static IP in router mode.
⚫Support WAN/LAN switching, and multi-WAN settings.
⚫Supports multiple services: HTTP, NAT, QOS, etc.
⚫Can be centrally managed through the PUSR cloud.
⚫Can monitor each access point and connection status of network devices.
⚫Support reset to factory settings via reload button.
AC1000 User Manual
pusr.com
1
- 5 -
⚫Support OpenWrt system customization.
1.3. Specification
Table 1. Parameters table
Model
AC200
AC1000
Processor
MTK MT7621AT
DDR
DDR3 2Gbit
FLASH
Nor Flash 64Mbit
POE
RTL8234B
None
EEPROM
BL24C64A
Power
Power
Power adapter
Input: 100 –240 V AC, 50/60 Hz
Output: 53.5VDC/1.22A
100~240V 50/60Hz AC
Power
consumption
≤5W
≤12W
Hardware
WAN
1*RJ45, 10/100/1000M, auto MDI/MDIX
LAN
4*RJ45, 10/100/1000M, auto
MDI/MDIX
48V PoE out, IEEE 802.3af, IEEE 802.3at
standard
4*RJ45, 10/100/1000M, auto MDI/MDIX
Console port
1* Micro USB
1*RJ45
USB
/
1*USB2.0+1*USB3.0
Reload
Reset to factory settings
Indicators
Power, work, Ethernet port
indicator
Power, work, USB, Ethernet port
indicator
EMC Protection
IEC 61000-4-2, level2, ESD
IEC 61000-4-4, level2, EFT
IEC 61000-4-5, level2, surge
Software
Work Mode
Router mode, AP mode
Management
HTTP Web based GUI
Local or online Firmware upgrade
Configuration Backup / Restore
Centrally managed through the PUSR cloud
AP Management
Manage up to 200 access points
Manage up to100 end users
Centrally and remotely to manage/configure wireless AP
View user’s status
AC1000 User Manual
pusr.com
1
- 6 -
Others
IP binding
Port mapping
WAN/LAN switching, and multi-WAN settings
Multiple services: HTTP, NAT, QOS, etc
OpenWrt system customization
Physical Parameters
Dimension
110*95*25mm
440*250*44.5mm
Installation
Desktop, wall mounting, DIN rail
mounting
Desktop/1U Rack Mount
Operating
Temperature
0℃~ 45℃
Storage Temperature
-40℃~ 75℃
Operating Humidity
5 ~ 95 %(non-condensing)
1.4. Button & Indicator
Table 2. Button & Indicator
Item
Description
Power Indicator
On: Power on,
Off: Power off.
Reset Button
Holding for 5s to reset to factory settings
ETH link/data indicator
Link: there is ETH device connected.
Data: Transmitting/receiving data.
Internet
Green: accessing to internet successfully.
USB
Green: there is USB device connected.
1.5. Dimension
Unit：mm
AC1000 User Manual
pusr.com
1
- 7 -
Figure 1. Dimension of AC1000
2. Get Started
2.1. Login setting webpage
Connect PC to the LAN port of the AP controller, and set the IP to static IP, such as 192.168.1.101. The IP
should be on the same network segment as the AP device.
You can test whether the network is connected by ping 192.168.1.1.
Figure 2. Ping command
AC1000 User Manual
pusr.com
1
- 8 -
Enter the default IP address of the AP 192.168.1.1 in the browser, and the browser will navigate to login page.
The username and password are both admin.
Figure 3. Login page
2.2. Briefs introduce of the webpage
The left column is divided into 9 menu pages: System status, mobile network, Internet accessing settings,
WLAN settings, LAN settings, Login settings, client list, upgrade and system log.
There are three auxiliary options in the upper right corner: PUSR cloud, Luci, language, as shown in the
following figure.
AC1000 User Manual
pusr.com
1
- 9 -
Figure 4. Function page
3. Configuration and parameter details
3.1. System status
This interface displays the basic information of the router, including 5 major blocks: system information,
WAN port information, LAN port information, AP information and cloud AP information (Details will be introduced
later). The specific information is shown in the figure below.
AC1000 User Manual
pusr.com
1
- 10 -
Figure 5. System information（AP）
3.2. AC management
This function is used to manage AP devices connected to the same LAN. The interface contains three sub-
menu bars: AP List, AP Settings, and AP Details.
3.2.1. AP list
This interface is used to display the information of AP devices that connected within the LAN. The detailed
information is shown in the following figure.
AC1000 User Manual
pusr.com
1
- 11 -
Figure 6. AP list
On this page, users can click on the IP of the connected AP device in the AP list to jump to the setting page, as
shown in the figure.
Figure 7. AP list
3.2.2. AP settings
The settings for AP mainly include 7 actions: settings, restart, restore factory settings, upgrade, delete
(offline AP), flash LED, export SN and cloud password, as shown in the figure.
Figure 8. AP settings
The detailed information of actions is listed in the following table.
AC1000 User Manual
pusr.com
1
- 12 -
Table 3.
Items
Description
How to operate
Settings
Set the SSID and password of the
WiFi.
Check the target device—>Enter SSID &
password→Confirm
Reboot
Reboot the AP device
Check the target device→Confirm
Reset to factory
defaults
Reset the AP to factory defaults
Check the target device→Confirm
Upgrade
Upgrade the firmware of AP
Check the target device→select the
firmware→Confirm
Delete (Offline AP)
Delete offline AP device
Check the target device→Confirm
Changing LED
status
Change device LED light status
Check the target device→click “Switch”→
Confirm
Exporting SN and
password
Export the SN and cloud password
of connected devices (for cloud AC
management import)
Check the target device→Confirm(The context of
the exported file is shown in the following
picture)
Figure 9. Export SN and passwd
3.2.3. AP information
On this page, users can view the detailed information of the AP device such as model, MAC, version number,
etc. You can select the corresponding AP device by selecting the model and SN code. The specific information is
shown in the following figure.
AC1000 User Manual
pusr.com
1
- 13 -
Figure 10. AP detail
3.3. AC management via PUSR cloud
This function is used to manage AP devices connected to PUSR cloud(the AP devices need to be connected to
the Internet). You need to import the SN code and cloud password of the corresponding device. It contains four
sub-menu bars: AP list, AP settings, AP details, and AP import.
3.3.1. AP import
Import the SN code and cloud password of the AP device on this page to enable the AC to remotely manage
the AP through the PUSR cloud. There are two ways to import: manual adding and file import, as shown in the
figure below. The content format of the imported file is as shown in the chapter. After successful import, and the
AP device has been successfully added on the cloud platform, it will be displayed in the AP list after refreshing
the page.
AC1000 User Manual
pusr.com
1
- 15 -
3.3.3. AP settings
The settings for AP mainly include 7 actions: settings, restart, restore factory settings, upgrade, delete
(offline AP), flash LED, export SN and cloud password, as shown in the figure.
Figure 14. AP settings
The detailed information of actions is listed in the following table.
Table 4.
Items
Description
How to operate
Settings
Set the SSID and password of the WiFi.
Check the target device—>Enter SSID &
password→Confirm
Reboot
Reboot the AP device
Check the target device→Confirm
Reset to factory
defaults
Reset the AP to factory defaults
Check the target device→Confirm
Upgrade
Upgrade the firmware of AP
Check the target device→select the
firmware→Confirm
Delete(Offline
AP)
Delete offline AP device
Check the target device→Confirm
Changing LED
status
Change device LED light status
Check the target device→click “Switch”→
Confirm
3.3.4. AP information
On this page, users can view the detailed information of the AP device such as model, MAC, version, etc. You
can select the corresponding AP device by selecting the model and SN. The specific information is shown in the
AC1000 User Manual
pusr.com
1
- 16 -
following figure.
Figure 15. AP detail
3.4. Internet accessing settings
There are 4 parts included in this function block: Mode Selecting, Network Port Settings, WAN Settings, IP
Mapping.
3.4.1. Mode selecting
There are 2 modes that can be selected: Router mode and AP mode.
Router mode: In this mode, the WAN port supports DHCP client, static IP, PPPoE. For LAN port, it support DHCP
service to assign IP addresses to terminal network devices.
AP mode: In this mode, WAN and LAN are bridged together, and DHCP service is turned off.
AC1000 User Manual
pusr.com
1
- 17 -
Figure 16. Mode selecting
3.4.2. Ethernet port setting
In this function block, users can implement WAN/LAN switching, and can monitor whether the Ethernet port
is connected to a device.
Figure 17. Ethernet port setting
3.4.3. WAN settings
On this page, users can set parameters of WAN port to get access to Internet, including DHCP client, static IP,
and PPPoE.
MAC clone: Replace the AC's MAC address with this MAC.
Figure 18. WAN settings
3.4.4. IP mapping
Connect the device to the LAN port, and the IP of the device is mapped to the WAN port. Users can directly
access the device using the mapped IP on the WAN port. After specifying the communication host IP, the device
AC1000 User Manual
pusr.com
1
- 18 -
can connect to the WAN host through the internal IP.
Figure 19. IP mapping
Specific steps:
1> Connect the device to the LAN port of AC200/1000,
2> Parameters of the IP mapping is listed in the following table,
Table 5.
Items
Description
Device IP
The IP of the device connected to the LAN port.
Mapping IP
WAN IP of AC200/1000
Host IP
The IP of the device connected to the WAN port.
Internal IP
Should be in the same segment of the device IP.
3> Set the IP of PC to the same network segment as the mapped WAN port IP and connect to the WAN port of
AC200/1000. Hardware connection is like the following:
AC1000 User Manual
pusr.com
1
- 19 -
Figure 20. Topology
4> To check whether the mapped IP can be pinged (if the access device is a router, you can try to use the
WAN port mapped IP to access the WEB server).
Figure 21. Accessing webpage via mapped IP
3.4.5. Port mapping
Like the IP mapping function, IP mapping occupies all ports. The difference here is that this configuration is
for specific port or port range mapping functions. Therefore, to enable port mapping, it is necessary to first
disable IP mapping. The port can be a number or a range, such as 23, 1-80, etc. Adding or deleting takes effect
immediately. It is possible to access the corresponding LAN devices through the WAN IP and port. The WAN IP,
which is also the access IP, can be set as a static IP or automatically obtained from the upper-layer router.
This manual suits for next models
1
Table of contents
Other PUSR Controllers manuals
