OSD ADJUSTMENT
1. Press thePOWER ON/OFF buttonon the monitoror remote unitto turn onthe power.
a.Touch power switchon the monitorto select videofor 2 inputs.
b.Press powerswitch on themonitor 2 secondto turn offthe monitor
2. Press MENUbutton on themonitor or remoteunit to activethe OSD functionshow on the
LCD screen andpress again toselect the adjustmentitem as below.
BRIGHTNESS
CONTRAST
COLOR
U/D NORM/REV (NORMAL/REVERSE)
R/L NORM/REV (NORM/REVERSE)
RST RESET
3. Press UP/DOWNbutton on themonitor or remoteunit to increaseor decrease thevalue of
the adjustment functionsfor optimum viewing.
REMOTE CONTROL UNIT
POWER on/off
Press this buttonto change modeof the screenpicture.
a.16 :9 wide mode
b.4 :3 full mode
VIDEO SELECT
MIRROR
Press this buttonto reverse thepicture horizontally.(LEFT TO RIGHT)
MENU
Up/down
FEATURES ONSCREEN DISPLAYCONTROL
ON SCREEN DISPLAY CONTROL
2 VIDEO INPUTS
16: 9 WIDESCREEN TFT-LCD PANEL
SUPER BRIGHT TFT-LCDPANEL
4. WIRECONNECTION
Red wire: +ve
Black wire: -ve
Violet wire: none
YellowRCA Jack: Video1
White RCA Jack:Video 2
5. ACCESSORIES
EXTENSION MINIDIN CABLE1PC
REMOTE CONTROL UNIT1 PC
VIDEO CABLE 1PC
MOUNTING PLATE1 PC
7 TFTLCD Roof-mountMonitor
Power on /off
Color
Contrast
Volume
Brightness
Mute
Mode
Up/down
Left/right
Video1/video2
SPECIFICATIONS:
DISPLAY 7 WIDE SCREENTFT-LCD
BACK LIGHT BUILTIN CCFT
DOT FORMAT 1440 x480
DOT PITCH 0.107(H) x 0.732(V)
VIEWING ANGLE L/R/T/B 55/55/15/35
COLOR FIGURATION STRIPE
BRIGHTNESS RATING 370 cd/m
CONTRAST RADIO 150:1
NUMBER OF PIXELS "691, 200"
VIDEO INPUT LEVEL COMPOSITE 1.0V P-P/75 OHMS
VIDEO INPUT SYSTEMS NTSC/PALAUTOSWITCHING
POWER SOURCE DC 12V +/- 15%
POWER CONSUMPTION 700Ma(max) / 10w(max)
OPERATIONTEMPERATURE -20 Celcius to + 75 Celcius
STORAGE TEMPERATURE -30 Celcius to + 85 Celcius
DIMENSIONS 200 (W) x166(H) x38 (D) mm
NET WEIGHT 0.8 KGS
