Pyle Pro P2002ABTI User manual

~~PYLE®
PRe)
Owner's Manual
P2002ABTI
www.pyleaudio.com

TABLE OF CONTENTS
Table of contents
F0 rew0 rd ------------------------------------------ 1
Features ------------------------------------------- 1
Precautions ---------------------------------------- 2
Technical specifications
-------------------------- 3
Front panel function ---------------------------- 4
Rear panel function ---------------------------- 5
Remote device function ------------------------ 6
Connecting to amplifier ------------------------ 7
Safety instructions ----------------------------- 8
Bluetooth function -------------------------------- 9
What is Included:
• Owner's manual ------------------- 1
• Remote control -------------------- 1
•
One AC Power Cord -------------- 1
•
FM Antenna 1Piece ----------------1
• AM Antenna 1Piece ---------------- 1
•
One (1) MP3 input cable---------- 1
•
Two (2) Rack mount brackets with screws-------2
Owner's manual
Remote control
One (1) AC Power Cord
Q
One (1) FM Antenna
One (1 )AM Antenna
One (1) MP3 input cable
Two (2) Rack mount brackets with screws

1 FOREWORD / FEATURES
Forevvord----------------------------------
Thank you for purchasing this fine amplifier.
Please read this operating instructions carefully before using. It will acquaint you fully
with all its features and help you enjoy your
time.
The product adopts the most advanced digital technique in the world. It is 4 channels
with its high power output, so to speak, the real acoustic centre ofyour family movie
theatre.
It is designed to be multi-funtional AM/FM Tuner, MP3/1pod input jack,
headphone input jack.
It is a product of the finest accompanying acoustic amplifier,
when applied to TUNER, IPOD/MP3, BLUETOOTH, DVD/CD etc. The brings
you the first ever Hybrid Amplifier with designed Sub out and Pre out
to adjust
to every situation.
Features
• Ipod docking station (Ipod not included)
• Bluetooth function
• Powers 4 loudspeakers
• Separate gain control for preamp and subwoofer
• Inputs: RCA (1 audio sources)
• Outputs: Banana binding post (to speakers)
• 1 RCA dedicated for record line output
• 2 mono RCA dedicated for subwoofer output
• 1 RCA dedicated for preamp output
• Digital fluorescent output display meter
• iPod I MP3 input with cable
• 11 0-220V Switchable
• AM/FM Quartz Synthesized Tuner
• Auto Station Seek

PRECAUTIONS
Precautions
1.Power source-The unit should be connected to a power supply AC-11 O/60Hz,
AC-220V/SOHz.
2.Ventilation- The unit should be situated so that its location or position does not
interfere with its proper ventilation. Place the unit at least 1Ocm away from the
walls.
3. Water and moisture-The unit should not be used near water-for example, near
a swimming pool in a wet basement, etc.
4.Electric shock-if a metal object, such as hair pin or needle comes into contact
inside this unit, a dangerous electric shock may result. For families with children,
never permit children to put anything, especially metal, inside this unit.
S.Enclosure removal-Never remove the enclosure. If the internal parts are touched
accidentally, a serious electric shock might occur.
6.Abnormal smell-if an abnormal smell or smoke is detected, immediately turn the
power OFF and pull out the power cord. Contact your dealer or nearest service
station.

TECHNICAL SPECIFICATIONS
Technical Specifications
Technical
P2002ABTI
Main Channel Power Output
2000Wx2
PMPO, 8 Ohms,1KHz test
THD(1KHz) <1%
Normal Load Impedance 8 Ohm
Input Sensitivity Impedance
DVD/CD AUX 400mV/33k Ohm
Microphone
6mV/600 Ohm
Signal to Noise Ratio
Pure Amplifier 76dB
KARAOKE 71dB
Frequency Range
Frequency Response(40Hz-15KHz) ±2dB
Tone Characteristic(100Hz-10KHz) ±14dB
Power Requirements AC-110V/60Hz AC-220V50Hz
Dimension
19" (w)x13.2" (d)x3.5" (h)
Weight
15.91bs
* Specifications subject to change without prior notice

FRONT PANEL FUNCTION
Front panel
1
o
o
II 11 li
(1) POWER SWITCH
Press to switch the power unit ON or OFF.
(2) PREV <
This knob is used to select the preview
station which has been kept in system.
(3) NEXT>
This knob is used to select the next station
which has been kept in system.
(4) MENU CONTROL
This is used to increment and decrement
level forthe selected function of Master
Volume , Bass , Treble , Balance , Auto
station seek.
(5) INPUT
This is used to select the input sources
DVD/CD , TUNER , IPOD/MP3 , BLUETOOTH
(6) SUB. OUT VOLUME CONTROL
~)MASTERVOLUMECONTROL
Adjusts the volume level. Turn the knob.
clockwise to increase the volume.
(8) ECHO CONTROL
Turn the knob to adjust the MIC echo level.
(9) MIC TONE
Adjusts the tone of MIC.
o
o
(10) MIC VOLUME
Adjusts the volume level. Turn the knob
clockwise to increase the MIC volume.
(11)LED
Adjust the blue lights and blue rings.
(12) AlB SPEAKERS OUTPUT SELECTOR
Three modes : A, B, A+B
(13) FUNCTION DISPLAYED FLUORESCENT
WINDOW
(14) AMIFM
Press it to selectAM/FM
(15) AUTO SCAN
AM/FM auto scan selector , scan and store
stations automatically. Can store 50 stations.
(16) MIC INPUT JACKS 1&2
KARAOKE MIC connect to these jacks.
(17) HEADPHONE JACK
Headphone connect to this jack.
(18) IPOD/MP3 JACK
IPOD/MP3 connect to this jack.
(19) IPOD DOCK
Connect IPOD to the dock.

Rear panel
(1)TUNER ANT
Connect for AM and FM antennas.
(2) AUDIO INPUT JACKS
Connect the audio output jacks of
DVD/CD , to these jacks.
(3) REC.LlNE OUTPUT JACKS
Connect the RECORD input jacks to
these jacks.
(4) PRE OUTPUT JACKS
Connect the professional input jacks
to these jacks.
(5) SUB·WOOFER OUTPUT JACKS 1&2
REAR PANEL FUNCTION
(6) A B (Right)SPEAKER OUTPUT TERMINALS
Connect your speaker system to
these terminals.
(7) A B (Left) SPEAKER OUTPUT TERMINALS
Connect your the other speaker system(s) to
these terminals.
(8) COOLING FAN
(9) 110V/220V SWITCH
According to power voltage ,push this button
tothestationof the110Vor220V.
(10) POWER CORD
Connect to AC 11 OV/60Hz&220V/50Hz outlet.
(11) BLUETOOTH ANTENNA
Pease pull the antenna out when using Bluetooth
input

REMOTE DEVICE FUNCTION
Remote
1. AUTO
Automatically search the signal source when power on.
2. DIGITAL
Tuning am/
fm number butto
3\27. TREBLE- TREBLE+
4-f----1'--1' -. +- __ 1-----+28 Mastertreble down and up
2+--- .... -1
3+----1----+
+- ----+27
~~ ~~ -~~+26
4+---"--+ 25
5'--~---- ~~ ~ ~~~ r~~~ __ -+24
6 23
-+ ----+22
-4- .... --+21
9+-----~ ~~~~~~ ~
10.-----~ ~~~ -
11 +----- __ +_
12.-----~-=~~.: =
13 +--- __ 1-+-
-+ __ --+20
-~""",---=:"""""---+1 9
-+ __ --+18
.:: ,,~~::::;:;;;:=--'-----+ 17
-+ ----+16
14~=t=~~~!e
15..-
Remote Control Operation
1.Remote control should be operated within 6
meters and the scope
of 30· in front of receiver.
2 Make sure that there is no
bi g obstacle between
remote control and machine.
3. Remote sensor should be far away
4\25. LlR
Left I Right Balance Control
5. MUTE
Mute
Selector
6\23. BASS- BASS+
Master bass down and up
7. SPEAKER
Speaker (A\B\A+B)
selector
8.DSP
Music dsp selector
9. AUTO SCAN
AM/
FM auto scan selector. scan and store stations
auto matically. Can store 50 stations.
10.AM
Multi-functional key, it isAM selector when it is TUNER,
11. MEMORY
After a station has been found, you can store the station
by pressing the MEMORY button,and the screen will
display SAVE.
12 \17. PREVI<I NE X T~
Station preview and next selector.
13. ST/MONO
Stereo and mono selector.
14 \15. TUNING- TUNING+
The two keys are used to adjust to the best signal
of
the stations.
16. LED
Led mode
selector
18\20. VFD- VFD+
Vfd down and up
selector
19. FM
Multi-functional key, it is FM selectorwhen it isTUNER,
21. OFF
Music dsp off selector
22. LOUD
Press the button to increase both bass and treble.
24 \26. VOL- VOL+
Master volume down and up
28. DVD/CD TUNER BLUETOOTH IPOD/MP3
Signal input
selector
from the light,high amounts of light can affect its pelformance.

CONNECTING TO AMPLIFIER
Connecting to amplifier
~~ ~I
D ~» »)}»
iii Play music via bluetooth
~90 ° )45
0
AM ANTENNA
NOTES: Please connect
IPOD to the dock from 45°
then
slowly turn to 90° .
FMANTENNA
DVD/CD
CD Recorder
©
®
SpeakerA
(right)
SpeakerB
(right)
SpeakerB
(left)
eo .. "m, r~1
~/ :: 0 :': (\) - ~ -),~----+. ©~o0©
2 Mono Sub Outputs
~ < ~ p ~~ ~~~'i----+' r©@do@©1
Preamp Out
Power
Amp
SpeakerA
(left)

SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
1. Make sure that all connections are properly connected and the main
volume is set to minimum level before turning on the unit.
2.
When more than one pair of speakers are used , (specially the main
speaker output) make sure that the speakers used are of the same
wattage and impedance, otherwise the unit maybe damaged under
high power or long term operation.
3. To avoid humming sounds and unwanted noise, make sure that all the
wires are properly inserted.
4. For speaker cords, strip off the vinyl coating and twist the wire tip.
Push down the pink jack or loosen the screw terminal, before inserting
the wire tip, then fasten it and tighten the screw. Be careful not to let
the wires stick out of the terminal otherwise this may cause a short
circuit when wires of different terminal contact each other.
5. After the unit is turned on, adjust the main volume to the desired level
same is true with the bass and treble volume, etc.

BLUETOOTH FUNCTION
BLUETOOTH FUNCTION
1. Turn on the unit and adjust the volume to a suitable level then select Bluetooth input channel.
Pull the Bluetooth antenna out on rear panel of the unit.
2. Active Bluetooth function on your mobile, play the music you want, then press OPTIONS,
select PLAY VIA BLUETOOTH, your mobile will search Bluetooth device, after finding the
device named "NAO Music", enter password "0000" then your mobile will connect to the
device and play music on the unit. (For the first time you need to enter password to match
the unit. Afterthat when you play music via Bluetooth your mobile will connect to the unit
automatically.)
NOTES:
1. Available operation range of Bluetooth function of the unit is 10 meters. Be sure there are no
obstacles between the unit and your mobile phone or it will affect the Bluetooth effect then
cause the sound brokenly.
2.
This operation only available for mobiles with Bluetooth function.
3. Above operation is based on NOKIA 6500s.0ther mobiles may have different setting and step
to play music via Bluetooth, please have a look at Bluetooth setting in the mobiles' manual.