Pyle Pro PPEQ150 User manual

(^PVLE*
PRO
Owner’s Manual
PPEQ150
Dual 10 Band Stereo Graphic Equalizer
w w w.pyleaudio.com
718.535.1800 718.236.2400(fax)
1600 63rd Street, Brooklyn NY 11204

Intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be strong enough to create a risk of
electric shock to a person.
A
A
Intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN THE AMPLIFIER
OR REMOVE THE COVER.There are not user serviceable parts inside - please use a qualified
technician for all servicing.
WARNING: To prevent electrical shock or fire hazard, this amplifier should not be exposed to
rain or moisture. Do not place objects filled with liquid, such as vases, on amplifier.
■ Safety Notice
• In the event of alien objects or liquid is found in the casing of the unit,
immediately pull the power plug and call for professional maintenance
personnel for inspection before reuse.
! Non-professional personnel are not advised to open the casing of this unit
to avoid electrocution.
• When abnormal situation is detected when the unit is working ( such as
smoke,extraordinary smell and noise being detected from inside the unit),
pull the power plug immediately , and seek professional repair personnel
to carry out servicing.
•
■ Power Notice
Before operating this unit, please check that its voltage is the sam e as
local voltage . Voltage of this unit is indicated on the power cable at the
back.
• When this unit is not used for a long period, please remove the power
plug of the unit from the power socket.
• While removing the power cable, please grab the plug of the power
cable instead of the lead. Avoid power cable being stepped on or
squeezed . Do not forcefully twist the power cable.
• When it is necessary to change power cable of the unit, please seek
service from qualified maintenance centers.
■ Safety Notice
• This unit needs to be placed in well - ventilated area to prevent
overheating of internal parts which may shorten its lifespan . When it
is placed on rack or inside a box, sufficiently large vent is required to
increase heat sink.
• Do not place this unit near heat sources or allow it to be directly
irradiated by sunlight, dusty places or areas with mechanical impact.
^ To avoid fire or electric shock,do not place the unit under humidity or
allow it to be caught in the rain.
• No not place articles on top of the unit as this will block the vents and
affect heat sinking effect.
• Do not allow needles , coins and other metallic objects to fall into the
unit and damage the unit.

I Setup of Panel Functions
ihMftMaiyiiiiii
1. Power switch
2. E QX10 left control
3. V u meters
4. EQXIO right control
1. Audio signal input jack
2. Audio signal(play) output jack
3. Audio signal(rec) output jack
4. Voltage selector (115V/230V can be switch)
5. Power line jack

Features of this Unit
• Ten bands of graphic EQ per channel
• Dual Vu meters
shows the output of the system
• LEDs in all sliders
• Two line inputs and dual tape monitor loops
Major Technical Specifications
(1) INPUT POWER. AC~230V/50hz\115V/60hz
(2) POWER SUPPLY.MAX: 20W
(3) FREQUENCY. 32hz-16Khz
(4) E Q X 1 0 CONTROL
32hz.16Khr.+ 12dB
5) DIMENSION. 483x2x55mm (19.03x9.26x2.17inch)
6) WEIGHT
2.3kg (5.1 lbs)