Pyle PWA12 User manual
www.PyleAudio.com
PWA12WallPlate/InWallAudioControlAmplifierReceiver
PWA15BTWallPlate/InWallAudioControlAmplifierReceiverwithBluetooth
SingleGangWallPlateStereoAudioPowerAmplifier
WallPlateStereoAudioPowerAmplifierReceiverisaquickandeasywaytogetyourmusicplayingtomostlocalspeakers.
Thebackofthewallplatefeaturesaterminalblockconnectiontoconnectspeakers,alongwithaconnectionforapower
supply and wires to connect the Auxiliary jack. On the front you can choose to connect your audio source through
BluetoothorastraightpluginthroughtheAuxiliaryplug3.5mmaudiojack.Onceyouhaveconnectedyouraudio,thefront
of thewall plate features a volume control knob. This works great forcontrolling volume for in wall speakers orceiling
speakersfromaconvenientlocation.
*The 'PRT' indicator on the PWA12 indicates overload protection.
*The 'BT' indicator on the PWA15BT indicates Bluetooth connection.
www.PyleAudio.com
Connection
A RedPower+
B BlackPower
C BlackSignal(ground)
D GraySignalLeft
E WhiteSignalRight
1 SpeakerOut,Right+
2 SpeakerOut,Right
3 SpeakerOut,Left+
4 SpeakerOut,Left
AmplifiedInWallVolumeControl
This device is the size of a standard wall volume control plate, and contains a highly efficient stereo
amplification.Itwilleasilydriveuptotwopairsofspeakersandisperfectformanybackgroundmusicor
pagingapplications.Stereo3.5mmjackacceptsL/Rlinelevelaudioinputs,and1/4''jackacceptsstandard
dynamic microphones. Rear pigtail leads for power supply and line level input connections are also
providedifpreferred.
Thisproductoccupiesstandardsinglegangdevicespaceandiscompatiblewithmostdeepsizedelectrical
boxesorlowvoltagebrackets.
IdealforUsewith:
Smartphone
Computer
DVDplayer
TV’s
Microphone
ConnectingPower
Undernormalcircumstance,powerisconnectedtothefrontpaneljack,utilizingthesuppliedACadapter.
Power maybe supplied from an alternative 12VDC source via the rear pigtail RED+/BLACK – leads (for
hardwired installations). When an AC adapter is plugged into the front panel, the RED+ lead is
disconnected.
BluetoothConnection
*Model:PWA15BT
TheBluetoothnetworknameappearsas'BTRY'
Nopasswordisrequiredtoconnect.
www.PyleAudio.com
ConnectingAudio
Line level audio is typically supplied via the front 3.5mm jack, it may alternatively be supplied via the
BLACK/WHITE/GRAYpigtailleadsontherearoftheunit(forhardwiredspeakerconnection).
PleaseNote:Anaudiosourceshouldnotbeconnectedtoboth.Useonlyoneortheother.
PWA12
xMicrophone Paging and Speaker Control Made Easy
xIn-Wall Audio Control Receiver
xBuilt-in Amplifier
xUniversal Gang Wall Plate Standard Size
xAux (3.5mm) Input Connector Jack
xInstantly Stream Audio from Your Favorite Devices
x(Works with Smartphones, MP3 Players, Computers,
Tablets, etc.)
x1/4'' Microphone Input Connector Jack
xRotary Master Volume Level Control
xTerminal Block (4) Speaker Connection
xIntegrated Switch for Input Selection (Stereo/Mic)
xIncluded: In-Wall Audio Receiver, Plate Cover &
Power Adapter
xBuilt-in Circuit and Overload Protection
xLED Indicator Lights
xPower ON/OFF Switch
xPerfect for Home or Office Applications
Technical Specs:
Power Output: 100 Watt Peak,
40 Watt RMS x 2 Ch. @ 4Ohm
Mic Input Type: Dynamic
Power Amp Type: Stereo Class-T
Minimum Load Resistance: 4 Ohm
T.H.D.: 0.06% (8 Ohm, 1 kHz)
*Optional Hard-Wire or Plug-in Power Adapter Capable
Power: AC 100-240V, 50/60Hz, 12V DC
PWA1215BT (with Bluetooth)
xMicrophone Paging and Speaker Control Made Easy
xBuilt-in Bluetooth for Wireless Music Streaming
xWorks with All of Your Favorite Devices
x(Works with Smartphones, MP3 Players, Computers,
Tablets, etc.)
xIn-Wall Audio Control Receiver
xBuilt-in Amplifier
xUniversal Gang Wall Plate Standard Size
xAux (3.5mm) Input Connector Jack
xInstantly Stream Audio from Your Favorite Devices
xUSB Port for Device Charging
x1/4'' Microphone Input Connector Jack
xRotary Master Volume Level Control
xTerminal Block (4) Speaker Connection
xIntegrated Switch for Input Selection
(Stereo/Mic/Bluetooth)
xIncluded: In-Wall Audio Receiver, Plate Cover & Power
Adapter
xBuilt-in Circuit and Overload Protection
xLED Indicator Lights
xPower ON/OFF Switch
xPerfect for Home or Office Applications
Technical Specs:
Power Output: 100 Watt Peak,
40 Watt RMS x 2 Ch. @ 4Ohm
Bluetooth Wireless Range: 30' Feet (10 Meters)
Mic Input Type: Dynamic
Power Amp Type: Stereo Class-T
Minimum Load Resistance: 4 Ohm
T.H.D.: 0.06% (8 Ohm, 1 kHz)
*Optional Hard-Wire or Plug-in Power Adapter Capable
Power: AC 100-240V, 50/60Hz, 12V DC
This manual suits for next models
1
Other Pyle Amplifier manuals
