Pyle PWMA150 User manual
PWMA150
www.pyleaudio.com
We appreciate for your purchasing this amplifier system.
Please read the manual thoroughly and keep this manual
in
a safe place for future reference.
Note:
Users are not permitted to disassemble the device in any way.Any unaut-
horized repairs oraccess without written approval from our distributor or
dealerwill void the product warranty.
If
you have any question, please feel
free to contact with our distributors ordealers respectively.
Basic Features
of
the Amplifier System:
This amplifier consists
of
SMD electronic components & SMT technology
which breed the best quality
in
the industry. It's specially designated for
Teaching, promotion, lecture, Assembly.It has a high sensitivity, frequency
steady, anti-whistle. Intelligent rechargeable power device can prevent the
circuit get damage because
of
non-properoperating. It has a gorgeous
portable design; that
is
your premium partner.
Caution:
1.PIease
plug
In
& charge the
bui~-in
rechargeable
battery
continuously
8
hours
without
Interruption
before
yoo
proceed
to
operate at the first
time.
2.Please
keep
it
far
8!Nay
from
the
high
power
wireless transmit device
in
order
to
avoid
the
signal
interference.
3.
It
comes
with
a magnet
coil
inside
the
speaker.
Please
keep
it
60an
8!Nay
from
the
computer or TV
in
order
to
avoid
the
magnetic
interference.
4.
Please
do not
dispose
the
amplifier near
any
flame.
For
example:
a
buming
candie/Fire place.Overheat damages
the
ampllfler components.
5.Please do not dispose
the
amplifier near any water
splashing
. Anywater
splashed inside
the
amplifierdamages thecomponents.
6.when the amplifier operates, please
keep
at
least
20
em
space
around
for
ventilation
. Please de
not
block
the
ventilation
vent
with
newspapers, table
doth orcurtain.
It
will
easily cause overheat and damages the amplifier
components.
7.PIease
stop operating the amplifier
and
send
It
to
our
appointed
service center
or the
authorized
technicians for
repairing
under the
following
cases:
A.The power cable or the power source plug
is
damaged.
B.Alien articles orwater splashed inside the amplifier.
C.The components are damaged or out
of
order.
Description
of
the Amplifier:
CD
Volume Control
® Tone Control
® Audio Output
® Power ON/OFF
@ Wired MIC Input
Packing Included:
1. Amplifier: 1 pes
2. Strap: 1 pes
3. Wireless Microphone: 1 pes
4.
9V
Battery: 1 pcs
5. UserManual: 1 pes
® Wireless Received Indicator
IJ)
Power/Recharge Indicator
® Fast Backward
® Play/Stop
@J
Fast Forward
@ USB Plug
Caution:
Please
use
the
same
specification
battery,
otherwise,
the
battery
may
explode
if
you
insert
with
wrong
specificalion
battery.
Operating
of
Audio
output:
Connect the external amplifier to the audio outputjack.
Operating
of
Wired
microphone:
Connect the wired microphone to the "Wired MIC Input" jack; adjust the
volume to the position as you need.
Operating
of
Bass & Trebles
volume
control:
The Bass & Trebles volume control can be adjusted the tone in orderto
achieve the best effect for your listening. If
il
sounds whislle, please lurn down
the Trebles.
Operating
for
large area coverage:
When you require to cover the acoustic effect for the larger area like hall
or
plaza, you can use a wireless microphone and conneclwith several amplifiers
with the same FM frequency. This canreproduce the sound simultaneously
and cover a largerarea extensively.
Trouble
shooting:
Occurrence Reasons and Resolutions
The LED in the amplifier The baiter power lows, please change to AC power,
is not bright
and
charge Ihe battery
on
time.
Screaming I.Tum
the
volume
of
the
amplifier
and
transmitter to
Bass
position.
2.Turn
Ihe
tone
10
Bass
posilion.
3.Adjust
the
cover
range
and
directions;
please
do
nol
let
the
loudspeaker
of
the
amplifier
face
towards
to
the
microphone
in
a
short
distance.
1.The power
of
the amplifier and transmitter is
low.
Noise
or
abrupt stop 2.The microphone
or
the cable has been damaged.
3.1nterfered by the same frequency.
1.
The power
in
the amplifier or microphone is
OFF.
No Voice hear 2.The cable has been damaged.
3.The volume control
in
the amplifier ortransmitter
is
OFF.
Other Pyle Amplifier manuals
