Pyle PLCD95UM User manual

ANTI-THEFT FLIP DOWN DETACHABLE PANEL
AUTO-LOADING CD/MP3 COMPACT DISC PLAYER
AM/FM DIGITAL PLL TUNING RADIO
WITH ESP FUNCTION &INFRARED REMOTE CONTROLLER
INSTRUCTION MANUAL
REMOTE CONTROL
PWR
1
SCAN
LOUD
BAND
MOD
MO
SEL
VOL+
VOL-
23
6
5
4
MUTE
APS
ST
DISP
INT RPT
RDM
LOC
DX
ID3
-10 +10
SEARCH
MENU
MENU
MENU
ENTER
TOP
/
www.pyleaudio.com
PLCD95UM

BASIC OPERATION
1
AUX CABLE
24
19
2
3
14
611
18 14 15
12
10 13
7
20
17
16
8
523
9
EJ
21 22

1. OPEN BUTTON
Press it to flip down the front panel then you can insert the CD disc into the CD
compartment .
BASIC OPERATION
2
2.VOLUME(MENU)+/-KNOB
Rotate the VOL+/-button to adjust volume level.
IN MENU MODE: Rotate the vol+ /- button also can adjust the selected mode.
IN MP3 MODE: Press search button to select track or file search, and then
press ENTER buttonto enter trackor file searchand using thevol+/- button to
move track or file search upward or downward.
FLAT M CLASS M ROCK M POP M DSP OFF
EQ:
BEEP ON BEEP OFF
BEEP:
MULT ON MULT OFF
MULT:
ESP ’12 ESP ’45
ESP:
WOOFER ON WOOFER OFF
WOOFER:
A. Adjust volume level by using vol+/- button
NOTE: The unit is initially set to volume mode.
B.Press the SEL button to select volume ,bass, treble, balance, fader mode
than use volume+/ - button to adjust the levelof them.
NOTE: The fader function controlsbalance between frontor rear speakers
for four speakers system
C.Press and hold SEL button for one second to move display through EQ, ESP,
MULT, WOOFER(the woofer function for woofer version only), and BEEP
functions. When mode has notbeen adjusted forseveral seconds, displayreturn
to normal radio or cd display.and then use vol+/- button to adjust the selected
mode as follows:
3.SEL/MNU(ENTER) BUTTON
Press SEL button immediately to move display through volume, bass, treble
and balance functions. Use vol+/-buttton to adjust the select mode. When
mode has not been adjusted for several seconds, display returns to normal
radio or cd display.
VOL BAS TRE BAL FAD
(VOLUME) (BASS) (TREBLE) (BALANCE) (FADER)
VOL BAS FAD
(VOLUME) (BASS) (FADER)
Note:
During press SEL button if any one of the EQ mode is turned on, LCD display
only indicate asfollows:
D.IN mp3 playback, Used for enter track and file search during MP3 mode after
press SEARCH buttonduring track search,after selecting thedesired track
with 1 digit or 2 digits, selected song begins to play after enter button is
pressed for longer than 0.5 second. During file search, when enter button is
pressed or longer than 0.5second.at the current directory mode, first song in
the corresponding director will begin playing.

3
BASIC OPERATION
6. MODE BUTTON
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation.
7. LUD
When reduce volume to half level,press it to enhancethe bass effect.
8.ST BUTTON
Press ST button to stereo reception for radio stations.
10-11-12-13-14-15. PRESET MEMORY BUTTONS
A. To memorize the current frequency, press any one of the six preset Buttons hold for
more than 2 seconds.
B. To recall the preset memory, press one of the preset buttons [1-6].
C. In CDP mode, press 1TOP button to pause CDP playing, press it again to resume CDP
playing. Long press 1 TOP button to select the first track/chapter to play.
D. In CDP mode, press 2INT button to play the first 10 seconds part of each song, press it
again to stop scanning and retain playing the song currently selected.
E. In CDP mode, press 3RPT button to play the current track repeatedly. Press it again to
cancel this mode.
F. In CDP mode, press 4RDM button to play the track in random order. Press it again to
cancel this mode.
G.In mp3 mode ,press the 5-10/6+10 buttton to select back 10 tracks or next 10 tracks.
16.MUTE BUTTON
Press it to eliminate the sound immediately.
4.5.TRACK UP /DOWN BUTTONS
A.During RADIO mode, press and hold or for more than 2 seconds you can
auto search channel. Then press or ,you can have manual search channel.
B.During CD mode, Press or button to choose the following track or the
previoustrack.Press and hold or button for several seconds to fast forward
or fast reverse. Releasing the button to stop fast playing
C.IN MP3 MODE:Press the or button once to choose the next or previous
track under normalMP3 playback.
17.DISP BUTTON
Press DSP button immediately to recall time display, then press and hold this button for
three seconds until the time is blinking. And rotate VOL+ button to adjust hour or VOL-
button to adjust minutes.
9.EJECT BUTTON
Press it to eject theDISC .
18.APS/SEARCH BUTTON
IN RADIO MODE:
When short pressing, the radio searches for each preset station.
When the field strength level is more than the threshold level of stop level, the
radio is holding at that preset number for few secretary with releasing mute, and
than searches again. In FM band, FM 1, FM 2 and FM 3 is checked one at a time.
When long pressing (more than 1 second),the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished.
And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.

BASIC OPERATION
4
IN MP3 MODE:
Press search buttonfor several seconds ,track and file and charactersearch
becomes possible in the new mode.
FOR EXAMPLE:
TRACK SEARCH EXAMPLE
HOW TO SEARCH FOR TRACK NUMBER 132,TITLED " WXY.MP3"
A. Press APS/SEARCH button once to go in to search initial mode, it is now
in TRACK search mode.
B. Press SEL/menu(ENTER) button to select 1st digit " 1" ,then LCD will shows 001
and 1st digit " 1" is selected blinking. If ENTER button is pressed again for more
than 0.5sec,the first song is played.
C. Then rotate VOL+or VOL- button, then 1st digit will increase according to the
number of times key is pressed
D. If LCD shows 002 ,then press ENTER button again the 2nd digit is selected.
LCD will show " 002" ,with middle 0 digit blinking.
E. Then rotate VOL + or VOL- button continuouslyto select 2nd digit to "3" i.e.,
" 032" ,with " 3" blinking.
F. Press ENTER button to select 3rd digit ,i.e," 032" ,with 0 blinking
(if ENTER buttons is pressed for longer than 0.5sec.,32th song is played)
G. Rotate VOL+ or VOL - to select 3rd digit to" 1" i.e., " 132" with 1 blinking
H. Finally press ENTER button, than track number " 132" will play immediately.
I. VOL+or VOL- button performsto shift 1st digit and2nd digit todesired track
(digit) then 3rd digit is shifted form 0-9 as a loop rotation.
FILE SEARCH EXAMPLE
NOTE:
Similar operation astrack search, use VOL+ or VOL - button to select directory
and track number, use ENTERbutton to confirmselection and/or startplayback
If the structure of Disc above does MP3 TOC, it is follows
Total Dir: 4 Total Song: 7
dir to have MP3 file 3(A,C,D)
We regard dir as MP3 file, when operating it is located
as A C D A......
To listen to a song from MP3(On Normal play)
A
BD
C
e.MP3
f.MP3
g.MP3
a.MP3
c.MP3
d.MP3
b.MP3
DISC
A. APS/SEARCH button input (2 times) - file search mode display
B. SEL/MENU(ENTER) button input -A Dir display
C. SEARCH VOL+orVOL- buttons input(2times) -d dirdisplay. If SEL /MENU
(ENTER)button is pressed again for longer than 0.5sec,first song in d dir e file
will begin playing.
D.SEL/MENU(ENTER)button input (1 times) -e file display
E.SEARCH VOL+/VOL- buttons input (1 times) -f file display
F.SEL/MENU(ENTER) button input -f MP3 File play start
G.If SEL/MENU(ENTER)button is pressed after SEARCH VOL+/- button is only
inputted once
H.NOTE:
a.This unit can only read MP3 disc in Id3v2.
b.This model alsohas song name(character) search functionfor MP3 disc
playback.Press APS/SEARCH button three times until CHAR SCH is shown
on display thenpress SEL/MENU buttononce, characterA blinks,use
VOL+/- buttons to select the right character(1letter of desired song name),
press SEL/MENU buttonto confirm yourchoice and secondcharacter Ablinks
for you to select, similar operation toenter other letters(max.5 characters),
After enteringyour song name,pressSEL/MENU button morethan 1 secondto
start the search. If no such song, NOT FND will be shown on display.

24. USB CONNECTOR SOCKET
When you wantto use theUSB,first you insertthe USB connect line into the USB
connectorsocket of thefrontpanel and theninsert the USB appliance into the USB
port to play(Seefig.1). (Its operationis similar tothe Mp3 operation.)
When the USB appliance connect to the unit, the system star playing track of
the USB appliance automatically.
NOTE:
To prevent damage to the USB ,in the state of the USB playing not topull out.
23.LOC
When in the radio mode,press it to select local or distance broadcast station
receive sensitivity .
SCAN BUTTON
Press it to scan up by one channel step with station detection. If a valid signal has
detected, the current frequency is blinked with in 5 seconds, then press it again to stop
scan and remain the current frequency; otherwise, the unit continue to scan up by one
channel step with station detection 5 seconds later.
NOTE: The SCAN buttonon the remote controller(for RC version only)
BASIC OPERATION
20.POWER BUTTON
Press it(more than1 second) to turn off and short pressto turn onthe unit.
19.BAND/ID3:
During radio mode:Pressit to select your desiredradio band and the band which
is selected will be displayed on LCD.
During mp3 mode :Press search button to working Id3 as follow:
(depend on the disc used for Mp3)
File folder song artist album
21.FLASHING LED
If the front panel is not on the main unit, LED will be flashing.
22.RESET
RESET button is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for the
following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button, the unit can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
5
(USB connect line)
USB Port
(Fig.1)

ELECTRIC CONNECTION
NOTE:
In spite ofhaving any kindsof speaker system, must use 4 ohms impedance
of speaker to reduce the distortion during high volume level.
6
WIRING CONNECTION
FUSE BOX
REAR RCA OUTPUT
CABLE(optional)
RCH RED
LCH WHITE
RCH RED
LCH WHITE
YELLOW
RED
IGNITION
SWITCH(B+)
MEMORY(B+)
GROUND(B-)
BLACK
BLUE
AUTO
ANTENNA
WHITE
WHITE/BLACK
GREY
GREY/BLACK
GREEN
GREEN/BLACK
VIOLET
VIOLET/BLACK
FRONT
Lch SPK
REAR
Lch SPK
FRONT
REAR
Rch SPK
Rch SPK
ANTENNA CONNECTOR
AUX cable(optional)

7
INSTALLATION
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE
ON THE UNIT
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
3.PUSH IT TO INSTALL THE FRONT
FRONT PANEL COMPLETELY .
DASH BOARD
METAL MOUNTING
STRAP
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW

8
INSTALLATION
FRONT PANEL
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE
CONNECTING THE WIRE.
1. The unit is designed for negative terminal of the battery which is connected to the
vehicle metal. Please confirm it before installation.
2. If the car interior is extremely hot, as after being parked in the sun, do not use the
player until the car has been driven for a while to cool off the interior.
3. Press the OPEN button t o flip do wn the fr ont panel (see fig.1), Slide the guide knob
to remove the right side first, then take away the front panel. (see fig.2) and put it in the
protective case (see fig.3) for safe keeping.
4. Install the front panel back in to it s bracket and then push it back to the position for
playing (see fig.4).
(FIG.3) (FIG.4)
(FIG.1) (FIG.2)
PROTECTIVE CASE
FRONT PANEL
FRONT PANEL
GUIDE KNOB
OPEN BUTTON

NOTES
9
DISC PLAY:
CLEANING DISCS
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE 1:
Do not use so solvents such as benzine, thinners. Commercially available
cleaners or antistatic spray damagethe unit.
Insert a discwith the labelsurface down. Doingso may damagethe unit.
NOTE 2:
Do not try to insert another disc when one has been already inserted.
Doing so maydamage the unit.
Handle the disc by its edge. And to keep the disc clean, do not touch the
surface.
Do not stickpaper or tapeon the disc.
Do not exposethe disc todirect sunlight orheat sources suchas hot airducts.
Or leave it in a car parked in direct sunlight where there can be a considerable
rise in temperature.
PREPARING THE REMOTE CONTROL
INSERTING THE BATTERIES
1.Open the battery compartment cover.
2.Insert the new batteries. Make sure
that the positive and negative terminals
of the batteries are oriented indicated.
3.Close the cover
USING THE REMOTE CONTROL
Face the remote control towards the
player front faceIR mark (remote
control signal receiver).
Operation angle: About +30 degree
in each the direction of the front of
the IR mark.
Label
surface up
+