Pyle PLSAR4 User manual

Animal Repeller
User Manual
PSLSAR4

Installation:
1. Unlatch battery dooron back of unit and remove battery compartment.
Install 4 xAAalkaline batteries. SEE FIGURE1
2. Two installation:
1) Put 2 screws on the wall .To place unit onto wall, push double wall mount hanging holes
onto the screws. SEE FIGURE 2. For best detection; the unit should be positioned on the wall
between 4.8 -14.2 feet above the ground.
2) Insert the spike into the earth, be careful not to use excessive force lest the device be
damaged, or bump into any obstruction.
FIGURE1 FIGURE2
How does it work:
3. Day Mold: Select the Day Mold, the unit working at the sound function only in day time.
sound and flash light will working same time in night time ,
Night Mold: Select the Night Mold, the unit will work in sound function only in day time
and flash light will working only in night time.

Note: If you are worried to make a noise to disturb people at night time, we suggest you select
the Night Mode. FIGURE 4
Attention:There have different sound for user choice that is bird ,eagle sound,dog bark sound;
Most important, user can adjust the volume.
4. Avoid placing unit behind any large trees, wall or object
Caution:
●Continuously use the SolarAnimal Repeller
●If storms are expected remove the unit fromoutdoor areas
●Turn off the unit if pets are playing around theprotection area
●Do no cover PIRsensorlens.