Pyramat PC GAMING CHAIR 2.1 10175801 User manual

ITEM NUMBER (Red): 10175801
UPC: 810965006746
PARTS LIST
INPUT
A
12v DC Power Adapter
Seat Plate Bolts x4 Caster Wheel x5
Seat Seat Base Subwoofer Backrest Right Armrest Left Armrest (with controls)
Chair Base Gas Lift
Armrest Bolts x8 Plastic Caps x8Hexagonal Wrenches
3.5mm Audio Cable 3.5mm Mini to RCA Audio Adapter
IMPORTANT: For your records, save your original sales receipt with this manual and
write your serial number here.
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
Your serial number can be found on the retail box, your original power adapter, and on the
care label on your product. It is 21 characters including dashes
DO NOT RETURN TO STORE
Need Help? Visit our website: www.pyramat.com/support
E-mail us: [e-mail]
Call us: 877.591.1012
Pyramat LLC PO Box 3610 Cerritos, CA 90703
Pyramat®is a registered trademark of Pyramat LLC in the US and/or select
foreign countries. Other marks may be mentioned herein that belong to other
companies. Specifications subject to change without notice.
©2008 Pyramat LLC. All rights reserved.

ITEM NUMBER (Red): 10175801
UPC: 810965006746
SET UP
5Align the right armrest holes with
the two holes on the right side of the
seat cushion. Secure with 2 Armrest
Bolts. Repeat step for left armrest.
8Cover all bolts with Plastic Caps.
1Insert the 5 caster wheels into the
base.
2Insert the Gas Lift into the hole
provided on the base.
3Align the seat plate with the 4 screw
holes as shown. Secure with 4 Seat
Plate Bolts provided.
6Slide the backrest between the
armrests on a slight angle and align
with the bottom holes on the right
and left armrest. Secure each side
with 1 Armrest Bolt. DO NOT
TIGHTEN DOWN ALL THE WAY.
7Rotate the backrest to align with the
top holes on the armrests. Secure with
2 Armrest Bolts. TIGHTEN DOWN ALL 4
BOLTS.
10 Pull up on the locking tilt control to
raise and lower the seat.
12 Twist the tension knob to adjust
the tension of the reclining backrest.
11 Pull out the locking tilt control to
release the backrest and allow the chair
to recline.
4Mount the seat on the gas lift by
aligning the hole in the center of the
Gas Lift with the hole on the Seat Plate.
9Connect the audio cable for the
speakers and control panel. Unzip the
corner of the Backrest and connect the
two black cables together. Connect
the Power Adapter to the power cable.

ITEM NUMBER (Red): 10175801
UPC: 810965006746
Insert the 3.5mm mini audio
cable into the headphone jack or
mini output on your computers
sound card.
AUDIO
OUT
AUDIO
IN
RCA cable not included
Cable from game console
TV, DVD, RECEIVER
2
3
1
GAME CONSOLES
PC OR MAC COMPUTER
Close all audio programs before inserting the AUDIO Cable.
A
INPUT
INPUT
INPUT
Compatible with ALL GAMING CONSOLES, PS2®, PS3®, XBOX®, XBOX 360®, Wii®, Game Cube®,
Nintendo DS®, DS Lite®, PSP®, iPOD®, TV , VCR, DVD and MP3 players.

ITEM NUMBER (Red): 10175801
UPC: 810965006746
HEADPHONE
HANDHELD / IPOD®/ MP3
4
PS3®
HDMI CABLE
INPUT
HDMI CABLE
INPUT
HDMI
5
HDMI cable
Cable from game console
Cable from game console
On your PS3 system menu go to
Settings>Sound Settings>Audio Output
>Settings>Select Audio Input Connector
or AV Multi. The audio will now play
through the RCA Cables and the TV will
still have High Definition.
HDMI cable
For XBOX 360 use
component cables
INPUT
INPUT
INPUT
IMPORTANT: For your records, save your original sales receipt with this manual and
write your serial number here.
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
Your serial number can be found on the retail box, your original power adapter, and on the
care label on your product. It is 21 characters including dashes
DO NOT RETURN TO STORE
Need Help? Visit our website: www.pyramat.com/support
E-mail us: [e-mail]
Call us: 877.591.1012
Pyramat LLC PO Box 3610 Cerritos, CA 90703
Pyramat®is a registered trademark of Pyramat LLC in the US and/or select
foreign countries. Other marks may be mentioned herein that belong to other
companies. Specifications subject to change without notice.
©2008 Pyramat LLC. All rights reserved.

FCC part 15.21:
WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC part 15.105:
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures :
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC AND IC STATEMENT
WARRANTY
Pyramat warranties this product and any included accessories against defects in material and workmanship for a period of 90 days from the date of first consumer purchase.This warranty is
enforceable only by the original purchaser. All damaged or missing parts must be reported within 14 days of purchase. This warranty covers all defects in materials and workmanship, but DOES NOT
cover the following:
1. Damage, deterioration or malfunction resulting from: a. Acts of God, accident, misuse, abuse, negligence, improper installation, maintenance or operation, or failure to follow the instructions
contained in this manual. b. Any shipment of the product (claims must be presented to the carrier). c. Repair, attempted repair or modification by anyone other than the Pyramat Service Center.
2. Any unit which has been altered or on which the serial number has defaced, modified or removed.
3. Any unit used for industrial or commercial purposes.
4. Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses or batteries).
5. Customer installation, set-up, adjustments or signal reception problems.
LIMITED WARRANTY: Pyramat will repair or replace (at its discretion) units covered by this warranty, without charge to the consumer for labor or materials. CONSUMER IS RESPONSIBLE FOR ANY
INSTALLATION OR REMOVAL CHARGES AND ANY INITIAL SHIPPING CHARGES. However, we will pay the return shipping charges to any destination within the United States if repairs are covered by
the warranty. Limited Warranty REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. PYRAMAT SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. Some states do not
allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
TO OBTAIN WARRANTY SERVICE: For service assistance, product information, or to locate the dealer nearest you, please call or write: Pyramat Service Center 877-591-1012
[email protected]. For further information on how to order accessories for this product or other Pyramat products, please visit our website at www.pyramat.com.
TROUBLESHOOTING
I can’t hear sound from my unit?
If you cannot hear sound from your unit the please re-check your cable connection and make sure all cables are securely connected.
To correctly connect the cables you must connect to an AUDIO OUTPUT source. A common set-up mistake is plugging the audio cables into the red and white AUDIO INPUT of
your Television or AV source. Sound will not play from the unit when plugged into an AUDIO INPUT source.
Make sure the cable connecting the seat to the backrest is securely connected. (See set-up step 9)
Make sure your audio player or game is not running when you plug in the audio cable. Try restarting the audio program/game or computer.
The power on my unit does not turn on?
Check to make sure the outlet you are using is in working condition, and the power adapter is securely connected to the unit. Press the power button on the control panel and
the LED light will light up. If you have tried this procedure and your unit still does not turn on you may need a replacement power adapter. To order replacement parts visit
www.pyramat.com.
I am missing cables, power adapters?
If you are missing cables or power adapters, and you are within the 90 day warranty period, please visit www.pyramat.com/support to send us a request for replacement parts.
SAFETY WARNING
WARNING: Intended for indoor use only. TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• Do not expose to direct sunlight or extreme temperatures.
• Adult supervision is required for set-up.
• Use only with the supplied power adapter. The power adapter is not a toy.
• Power units are intended to be correctly oriented in a vertical or floor mounted position.
• Excessive use of audio equipment at high volume may lead to hearing loss. Listen responsibly and use common sense.
• Children under 13 should not use this product without parentalsupervision.
• DO NOT wash or soak the Sound Rocker with water. If cover becomes wet, disconnect power immediately and do not use until totally dry.
•To avoid injury or death fromelectricalshock, NEVERopen the electricalcabinet or remove the cover.