QERIDOO Kidgoo1 2018 User manual

V
I
D
E
O
T
U
T
O
R
I
A
L
This product fulfils all safety requirements of the
European standard for bicycles and bicycle trailers
(DIN EN 15918).
EN
Kidgoo1 2018
Kidgoo2 2018


Introduction 4
Proper use 4
Performance limits 4
Notes on the user manual 5
Safety instructions 6
Users 6
Conditions of use 6
Passenger 7
Towing vehicle (Trailer mode) 7
Maintenance and storage 7
Cycling with a trailer 8
Additional lanes 8
Additional weight 8
Defensive riding 8
Product overview 9
Scope of delivery 9
Components and control elements 10
Assembly 12
Unfolding the cabin 12
Attaching impeller axle 12
Installing the wheel guard and the leaf spring
cover 13
Installing the head protectors (Kidgoo2) 14
Mounting the push handle 14
Inserting the wheels 15
Tightening the backrest 15
Inserting the pennant 16
Optional assembly steps 16
Installing the buggy wheel 16
Adjusting the buggy wheel 16
Mounting the tow bar 17
Mounting the coupler onto a bicycle 18
Installing the rear light 19
Utilisation 20
Applying the parking brake 20
Adjusting the push handle 20
Setting the mode 21
Adjusting the buggy wheel 21
Insert tow bar 22
Using the pennant 22
Attaching the hand strap 22
Putting on the 5-point safety harness 22
Securing the load 22
Loading the baggage 22
Adjusting the safety harnesses (Kidgoo2) 23
Embarking the children 24
Strapping in children 25
Checking the weight distribution and tow bar load
25
Connecting the trailer to a bicycle 26
Using the comfort functions 27
Using the climate functions 27
Using backrest cushion 28
Storage 29
Care and maintenance 30
Care 30
After every use 30
After use in harsh weather conditions 30
When not in use 30
Maintenance intervals 31
Before every ride 31
Monthly (or every 200 km) 31
Semi-annually (or every 500 km) 31
Every three years (or every 3000 km) 31
Appendix 32
Technical data 32
Warranty terms 33
Support information 33
Spare parts 34
Kidgoo 2018 Subject to change. – 06|2018 – 3
2– 06|2018 – Subject to change. Kidgoo 2018
Contents
Certificates
The Kidgoo has been tested and approved in accordance with the European Safety Standard EN
15918. It also fulfils all emissions limit values laid down in accordance with Part 3 of the toy safety
standard EN 71.
Schadstoffgeprüft
CENTRE OF TESTING
SERVICE INTERNATIONAL
Test Report Number
CNB3151209-05787-C
CNB3151217-05914-C
CNB3160120-00217-C
Schadstoffgeprüfte Materialien
- TPU (Fenster)
- EVA (Plastikteile)
- 1680D Stoff, 600D, 900D
(Bezug, Verdeck, Gurte)
Berücksichtigte Normen
European Standard EN 71-3:2013+A1:2014
US EPA3052:1996,US EPA 3050B:1996,
US EPA3060A:1996,US EPA 3550C:2007,
US EPA3540C:1996, ISO 17353:2004,
BS EN 14582:2007, EN 14372:2004
CTS International
Centre of Testing Service
Documentation
The statements in this documentation are not to be interpreted as an assurance of
particular product properties. Despite the greatest care being taken to avoid technical
inaccuracies or omissions, the possibility of these arising cannot be entirely excluded.
When necessary, individual items of information can be changed quickly and without
special notification.
This documentation can be ordered from Qeridoo GmbH in other languages, or is available for
download on our website if already available.
Visit us at: www.qeridoo.de
Copyright
All rights to the documentation remain with Qeridoo GmbH.
Texts, values and illustrations may not be reproduced, distributed, used for competitive purposes or
passed on to others. If other product names are used in this documentation, these must normally
be regarded as registered trademarks of the respective manufacturer.
Pronunciation and meaning
Qeridoo - keˈɾi.do
Qeridoo was borrowed from Spanish que-
rido, which means   or
.
And this is exactly what we do.
We love our products.

Kidgoo 2018 Subject to change. – 06|2018 – 5
4– 06|2018 – Subject to change. Kidgoo 2018


The Kidgoo was designed as a bicycle trailer and comes with an additional buggy and walker func-
tion. For , use a tow bar with coupler to connect the trailer to a suitable towing vehicle
(bicycle or motorised pedelec with a maximum speed of 25 km/h). With the buggy wheel attached,
the Kidgoo can be used as a child carrier in . In  you can use it when wal-
king.
The Kidgoo is available as a one-seater (Kidgoo1) or as a two-seater (Kidgoo2) and should be used
exclusively for the private transportation for one or two children on paved routes. You can also carry
baggage in the compartments intended for that purpose, provided that you observe the permissible
weight limits and stow the baggage securely so that the load is evenly distributed. During the jour-
ney, each child must be secured in the seat by a safety harness. If you are carrying only one child
in the two-seater, you must alter the harness arrangement as per the instructions in the chapter
„Adjusting the safety harnesses (Kidgoo2)“ on page23 so that the child is seated securely in the
centre.
The Kidgoo fulfils all safety requirements of the European standard for bicycles and bicy-
cle trailers (DIN EN 15918). It also considers the wheeled child conveyanes norm EN
1888. In Trailer mode, a rear light must be installed in accordance with the Road Traf-
fic Licensing Regulations and to be in use in darkness or in conditions of poor visibility.
Before using the Kidgoo, check which local regulations apply and how the product may be used.
It must not be used on unsurfaced ground, to transport baggage in the passenger compartment,
to carry animals or for commercial use. It is essential to observe the limit values specified in the
chapter „Performance limits“ on page 4 and to check them before every journey. In all cases,
the rider of the combination or the person using it in Buggy or Walker mode is responsible for the
proper use and roadworthiness of the Kidgoo.

The Kidgoo can only be safely used if you observe and adhere to the following performance limits
in every mode:
Requirements for passengers Kidgoo1 Kidgoo2

Permissible total weight (Kidgoo + children + luggage) 50 kg 60 kg
Permissible payload (children + luggage) 33 kg 42 kg
Maximum total weight of two children - 36 kg
Maximum weight per child 22 kg 22 kg
Compartment room 5 kg 5 kg

Minimum age (without baby seat)
The child must be able to sit up independently. For children
aged up to 18 months, we recommend using a comfort insert
6months 6 months
Minimum age (with baby seat) 1month 1 month
Maximum age 6years 6 years

Maximum height 116cm 116cm
The following additional restrictions apply to Trailer mode:
Requirements for the tow bar Kidgoo1 & Kidgoo2
Permissible tow bar load range
(on the tow bar coupler pocket)
3–8kg
Minimum ambient temperature -10° C
Requirements for the towing vehicle Kidgoo1 & Kidgoo2
Vehicle type Bicycle, pedelec/E-Bike
(supported for up to 25 km/h)
Maximum permissible speed 25 km/h; in curves max. 7 km/h
(walking pace)
Rear wheel size 25"–29"

This user manual provides you with information about all technical and safety aspects that you
require for mounting, using and maintaining the Kidgoo.
fRead the user manual in full.
fUtilise the user manual to provide instruction for all users.
fAlways keep the user manual close to the Kidgoo.
The following typographical elements are employed in the user manual to indicate the possible
danger sources or special information:

Identifies notices pertaining to the Danger risk level. Indicates possible dangers that
can result in injury if the instructions are not followed.

Identifies notices pertaining to the Caution risk level. Indicates possible dangers that
can result in material damage if the instructions are not followed.

Identifies important information pertaining to the current subject. Indicates alternative
actions, other information sources or helpful tips.
All  left, right, front, back, top, bottom etc.) refer to the perspective of a viewer stan-
ding behind the push handle and looking in the direction of travel. The tow bar is therefore in front,
the push handle behind.
In this user manual, the word  refers to the person transporting children with the Kidgoo and
making the necessary adjustments on the vehicle.
This user manual applies both for the Kidgoo1 and Kidgoo2.

Kidgoo 2018 Subject to change. – 06|2018 – 7
6– 06|2018 – Subject to change. Kidgoo 2018


Read the safely instructions below carefully.
The safety and accident prevention regulations valid in your region and statutory rules
such as the road traffic regulations also apply, and take precedence in cases where
there is doubt.
Make sure that the Kidgoo is used only by persons suitable for its operation, as defined
below. Users must have read and understood this user manual in full.

The Kidgoo is not a toy and must not be misused as such. This means that it is not
permissible to attach the Kidgoo to a child’s bicycle.
Users
Users are defined as the following persons:
–Any person carrying out assembly work on the vehicle or changing the settings.
–The rider of the towing vehicle in Trailer mode.
–The operator in Buggy or Walker mode.
The user must be at least 16 years old and mentally mature enough to operate the Kidgoo and
transport children.
In Buggy mode, operation by a younger person is allowed if he/she is supervised by a person
who meets the requirements stated above.
The user is at all times responsible for the proper use and roadworthiness of the Kidgoo.

The Kidgoo must not be used for commercial or competitive purposes.
Before every journey, check that the Kidgoo is in a proper and technically faultless condition.
Perform a visual inspection and in particular pay attention to the instructions and checklists in
the chapter „Maintenance intervals“ on page31. The notes in the chapter "Before every ride"
and "Monthly (or every 200 km)" also apply to the first use of the Kidgoo.
Also inform yourself about country-specific rules and traffic regulations if you are making trips
across borders or if you want to take the Kidgoo with you on trips abroad.
Before every journey, make sure that the requirements for the particular mode have been
fulfilled. In particular, pay attention to the table and the instructions in the chapter „Setting the
mode“ on page21.
In Trailer mode, a rear light must be indicated and operated on the left side of the push handle
in accordance with the Road Traffic Licensing Regulations in darkness or conditions of poor
visibility.
Before every journey, close the inner part of the 3-in-1 canopy so that the integrated insect
net protects the children from insects and small stones. When in traffic, the weather canopy
should also be closed and the ventilation window open to provide protection against exhaust
fumes.

The Kidgoo1 can carry one child and the Kidgoo2 can carry two children aged
between 1 month and 6 years. Special accessories must be used in order
to secure children who are under 6 months old or who cannot sit upright
independently, see
www.qeridoo.de/zubehoer.
So that they have sufficient headroom in all situations, the children must not
be taller than 116 cm.
Each child must be properly fastened in with a 5-point safety harness.
The children must wear bicycle helmets for every journey. This is also recommended for the
bicycle rider in Trailer mode in order to set a good example.
Before each journey, explain to the children that they must behave appropriately. Undoing
safety harnesses, excessive rocking or leaning out must be strictly forbidden.
Make sure that the cabin is well ventilated and make sure that the children are wearing clothes
appropriate for the weather conditions and the cabin’s inside temperature.
Never leave children unsupervised in the Kidgoo and make sure that they feel comfortable.
Make regular stops during longer journeys to give the children the opportunity to get out and
move around. Make sure that they drink sufficient liquids.

As the towing vehicle, it is not permitted to use vehicles that must be registered such as
motorised e-bikes for speeds up to 45 km/h or vehicles with a combustion engine.
The bicycle or the pedelec (motorised for speeds up to 25 km/h) must be technically sound
and suitable for towing loads in accordance with the permissible total weight. The maximum
permissible total weight can be found in chapter „Performance limits“ on page4. For
details, read the towing vehicle’s manual or consult a specialist dealer for a suitable inspection
to be carried out.
Before every journey, test the function of the bicycle’s brakes, brake linings and tyres and
inspect them for wear. Check that the coupler is secure.
For carrying passengers, the bicycle should be equipped with a rear-view mirror. Working lights
conforming to the road traffic regulations are mandatory for journeys in darkness or conditions
of poor visibility.

Follow all instructions relating to the care and maintenance of the Kidgoo and observe the
specified maintenance intervals, see „Care and maintenance“ on page30.
Install and use only original accessories and spare parts manufactured or recommended by
Qeridoo. Using other products relieves the manufacturer of liability.
Only carry out structural modifications or extensions to the vehicle which are necessary
for the use of the approved accessories in accordance with the assembly instructions. Any
further manipulation that is not expressly approved by the manufacturer in writing relieves the
manufacturer of liability in the event of accidents and defects.
Follow the instructions in the chapter „Storage“ on page29 for storing the Kidgoo properly
when it is not in use.
A
C
C
E
S
S
O
R
I
E
S

Kidgoo 2018 Subject to change. – 06|2018 – 9
8– 06|2018 – Subject to change. Kidgoo 2018


The way in which the bicycle moves changes significantly when it is pulling a trailer, and this is par-
ticularly noticeable when braking and cornering. With regard to this, pay attention to the following:
Practice cycling with the trailer before going out onto the road.
Do not carry children until you have familiarised yourself with the different riding behaviour on
suitable terrain.
Think of the children’s safety whenever you ride. Always adapt your way of riding and your
speed to local conditions, and never forget that you are towing a trailer.

The two wheels of the Kidgoo run outside the familiar cycling lane. On all routes, particularly
when there are obstacles and potholes, remember that you will always need 3 suitable lanes
for safe riding.
The Kidgoo1 is 72 cm and the Kidgoo2 is 82 cm wide. Maintain a sufficient distance from
obstacles and avoid routes that are too narrow. Always negotiate narrow points and bends
slowly.
Combined, the bicycle and trailer are at least 2.5 m long in total. Negotiate curves with wider
radii than usual and bear in mind the additional lane required for the inner wheel of the Kidgoo.

When fully loaded, the Kidgoo1 weighs up to 50 kg and the Kidgoo2 weighs up to 60 kg that the
bicycle must pull, brake and keep on track in addition to its own weight and that of the rider:
–Jerky pulling and braking puts high loads on the coupler and tow bar, and thereby increases
wear.
–All stopping distances are much longer when braking, and the stress on the brake linings
is correspondingly greater. The stopping distance is further increased on wet surfaces and
downhill slopes.
–During braking, especially on bends, the trailer can swing out or push the bicycle’s rear
wheel to the side and reduce its traction.
–High centrifugal force on bends can result in the trailer tipping over.
Do not exceed the maximum permitted speed of 25 km/h and avoid riding at an angle.
Negotiate bends no faster than at walking pace (max. 7 km/h) in order to prevent excessive
centrifugal forces.

Always ride defensively and with foresight.
Brake in good time before reaching bends, junctions, obstacles etc.
Always negotiate uneven surfaces slowly. Keep away from steps, escalators and very steep
stretches.
Get off the bike at curbs and pass them slowly.

Failure to comply with the aforementioned safety instructions can lead to property
damage and personal injury.

The scope of delivery includes some functional units of the Kidgoo already preassembled.
fUnpack all supplied parts and place these on a clean surface.
fCheck the contents of the package against the list provided.

Contact our Service department immediately if any parts are missing or if you find that
the packaging or product is damaged, see „Support information“ on page33.
fRemove the packaging material and all protective caps, and dispose of them in accordance
with the environmental guidelines that apply in your region.
fRead the chapter„Assembly“ on page13 before you assemble parts.
1Cabin with seats, back pad* and 5-point
safety harnesses
2Wheel guard (2x)
3Head protector (Kidgoo2)
4Leaf suspension cover (2 Stück)
5Multiwheel buggy wheel
61 head rest (Kidgoo1) or
2 head rests (Kidgoo2)
7Pennant with 2-part pennant staff and
centre piece
8Tow bar with coupler and retaining strap
92 wheels
10 Wheel axle with parking brake and sus-
pension
11 Push handle with hand strap
12 Assembling kit wheel axle
13 Rear light
*The back pad is located under the seat

12345
6
1 2 3 4 65
7
8
9
10
11
12
13
14
7
8
9101112
13
14
15
Kidgoo 2018 Subject to change. – 06|2018 – 11
10 – 06|2018 – Subject to change. Kidgoo 2018


1Cabin (frame made from aluminium tubes
with weatherproof fabric cover)
2Side window (right, incl. ventilation
window)
3Canopy with insect, plash water and sun
cover;
window film can be rolled up
4Seat with 5-point safety harnesses, head
rests and back pad
5Reflective seams in the fabric cover
620" wheel with push-in axle, air valve
(Schrader valve)
7Rubber cap for push-in axle release when
mounting the wheels
8Wheel axle with parking
brake and suspension
9Removeable wheel guard for rejection from
obstacles
10 Tow bar for Trailer mode (in the standby
position)
11 Tow bar holder with Locking button
12 Buggy wheel for three-wheel use in Buggy
or Walker mode
13 Wheel mount on the cabin frame
Operating mode switch:
Buggy mode: rotatable wheel
Walker mode: wheel running straight
Trailer mode: dismounted buggy wheel
14 Front reflector, white
15 Harness fastener of canopy
 


1Pushbutton for adjusting the height of the
push handle (both sides)
2Pennant pouch for holding the pennant
staff (inside)
3Push handle with safety function as impact
protection
4Ventilation window, can be rolled up
5Window with smartphone pocket
6Quick-release clamp for securing the push
handle (2x)
7Storage space cover with two pouches for
small items
8Storage space with inside pocket,
accessible from the outside
9Reflective seams in the fabric cover
10 Rear reflector, red
11 Wheel axle
12 Parking brake brake lever
13 Coupler pocket with cotter pin fastening
and retaining strap for securing the tow
bar on the bicycle frame
14 Hand strap for Buggy and Walker mode

Kidgoo 2018 Subject to change. – 06|2018 – 13
12 – 06|2018 – Subject to change. Kidgoo 2018

Below you can read all the information that you will need to assemble your Kidgoo properly.
fMake sure that you have sufficient space to assemble it.
Also pay attention to the door width at the place of installation: The Kidgoo1 is 72 cm wide with
the wheel guards fitted and the Kidgoo2 is 82 cm wide.
fHave a size 4 mm hex key to hand (not supplied).
fPerform each of the instructions step by step.
fIf necessary, follow the QR code to call up a video about
assembly and operation on the Internet.
V
I
D
E
O
T
U
T
O
R
I
A
L

Never perform assembly work if there are children in the cabin. Keep children away from
the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get
trapped.

fPlace the collapsed cabin in the assembly area.
fPosition yourself behind the cabin.
fPull both sides of the rear cabin frame all the way up.
fOpen the cover of the storage compartment.
fPull the lower horizontal bar backwards evenly until
the two rey locks on the left and right engage audibly.

The Kidgoo is equipped with a fully automatic air-leaf spring combination. With the leaf springs you
screw the impeller axle to the retainer of the cabin frame
fTilt the cabin backwards and place it on its roof surface. This makes the lower cabin frame
accessible for installation.
fLoosen the 4 hexagon socket screws from the leaf spring retainer.
fAlign the leaf springs so that the holes overlap.

fPut the four screws through the leaf spring plates into
the leaf spring retainer and tighten them.
fRepeat the process on the other side.
fRemove the retaining rings and bolts from the
packaging.
fConnect the air spring to the retainer on the impeller
shaft with a bolt and secure it with the circlip as
shown in the picture.
fRepeat the process on the other side.

The orientation of the leaf spring plates can be additionally regulated, since the leaf
spring holder on the axle has long holes which allow a lateral alignment.

The wheel guard on both sides of the cabin prevents the wheels from getting stuck on pillars or
similar obstacles. The leaf spring covers serve as protection against bruises.
fMake sure that the slide covers for the wheel guard and leaf spring cover are fixed and
tightened on both sides.
fSlide the wheel guard onto the slide holder as shown
in the picture.
fBe sure that the fixing mechanism locks audibly.
fRepeat the procedure on the other side of the trailer.
fSlide the leaf spring cover onto the slide holder as
shown in the picture.
fBe sure that the fixing mechanism locks audibly.
fRepeat the procedure on the other side of the trailer.

Kidgoo 2018 Subject to change. – 06|2018 – 15
14 – 06|2018 – Subject to change. Kidgoo 2018


The head protector serves as additional side protection when transporting two children.
fBe sure that the slide covers for the head protectors are fixed and tightened on both sides.
fSlide the head protector onto the slide holder as shown
in the picture.
fBe sure that the fixing mechanism locks audibly.
fRepeat the procedure on the other side of the trailer.

The push handle has multiple height settings and is used for pushing, pulling and manoeuvring
your Kidgoo. And if it becomes necessary, it performs an important safety function as a impact
protection.
The push handle is attached at the top of the cabin frame using 2 quick-release clamps:
fUnfold the push handle completely. To do this, keep the light grey pushbuttons pressed on
both sides, see „Adjusting the push handle“ on page20.
fLoosen the two pre-assembled quick-release clamps
and remove them.
fHook the upper loops of the canopy into the tube ends
at the cabin roof.
fInsert the two ends of the push handle into the tube
ends at the cabin roof.
fPlace the quick-release screws from the outside
through the holes of the following parts to secure the
connection:
–Reinforcement plate (outside of the push handle)
–Push handle
–Tube ends of the cabin roof
fPlace the nut onto the thread and tighten until the quick-release clamp can only be closed with
a bit of force.
fClose the quick-release clamp.
fRepeat the procedure on the other side.

Make sure that the push handle is also mounted for every journey in Trailer mode. Only
then does the cabin have an impact protection.

fLift the cabin a little bit in order to install the wheel
easier.
fInsert one wheel into the cabin’s axle retainer:
–Hold the wheel so that you can press your thumb
onto the rubber cap on the outside of the wheel
hub.
–Press on the rubber cap and keep it pressed in order to open the push-in axle fastening.
–Insert the wheel’s push-in axle as far as it will go into the axle retainer.
–Release the rubber cap to secure the push-in axle.
fPull on the wheel to check that the wheel is locked in the axle retainer.
fInsert the second wheel in the same way.

After mounting the wheels, secure the Kidgoo whenever you park it so as to prevent it
from rolling away, see „Applying the parking brake“ on page20.
fCheck whether there is sufficient air in the wheels (recommended air pressure: 2.5 – 3.5 bar).
If necessary, use an air pump for car valves to top up with air.

The stable backrest is an important safety element. The belts must always be tight under the seat
and behind a cabin for a good grip.
fPut the cabin in the upright position and open the
cover.
fCheck the tension of the 4 belts under the seat and
tighten them firmly.
fOpen the cover of the storage space and check the
tension of the 5 harnesses behind the backrest.
fTighten all straps in the rear storage compartment.


Kidgoo 2018 Subject to change. – 06|2018 – 17
16 – 06|2018 – Subject to change. Kidgoo 2018


The pennant must always be mounted in Trailer mode. Otherwise the very low Kidgoo is
too easily overseen by other road users.
For safety reasons, we recommend putting the pennant into the pennant pouch so
that it is easily visible before every journey, including in Buggy or Walker mode.
fUsing the connecting piece, insert the pennant staff
into the extension rod.
fInsert the extended pennant rod into the slit on the top
left of the cover and secure the position by fixing the
pennant pole in the base frame.
fUnroll the pennant so that it can fly clearly visible on
the pennant staff.


You need the buggy wheel for Buggy and Walker mode. The buggy wheel is connected directly with
the wheel suspension attached to the frame and is mounted so that it can rotate through 360°.
fLift the cabin at the front.
fPlace the buggy wheel into the wheel mount as far as
it will go, until it engages audibly with a clicking noise.
fCheck whether there is sufficient air in the buggy
wheel (maximum air pressure: 1.9 bar). If necessary,
use an air pump for car valves to top up with air.

fSet with the mode selector switch [A] and the release
button (unlock key) [B] in front of the suspension the
desired operating mode:
–Buggy mode: Buggy wheel rotatable through 360 °.
–Walker mode: Buggy wheel running straight.
–Trailer mode: unfasten and pull out the buggy
wheel.
 

You only require the tow bar in Trailer mode. It is used to hook up the Kidgoo behind a bicycle equip-
ped with a suitable coupler, see „Connecting the trailer to a bicycle“ on page26.
The tow bar is attached to the tow bar mount using a locking bolt and can be used in two different
positions:
Attachment position: The tow bar is facing forwards.
Standby position: The tow bar is facing to the rear and is carried under the cabin floor.
In both positions, the tow bar is also secured with a cotter pin.
fPull the locking knob and turn about 30 ° so that the
button during the release remains in the open position.
fPush the front button on the tow bar so that the locking
bolt unlocks.
fKeep on pushing down the button and push the tow
bar forwards until the mark in the tow bar mount is
reached.
fRelease the button so that the locking bolt secures the tow bar in the tow bar mount.
fAdditionally, secure the tow bar by pulling the locking knob slightly backwards, turn about 30 °
and let it return to the closed position.

You do not have to remove the tow bar completely. Simply place the tow bar into the
tow bar mount from behind to stow it under the cabin floor, see „Insert tow bar“ on
page22.

Kidgoo 2018 Subject to change. – 06|2018 – 19
18 – 06|2018 – Subject to change. Kidgoo 2018



Make sure that your bicycle is suitable for towing a bicycle trailer, see „Performance
limits“ on page4. Since it may in some cases be necessary to change the rear wheel
axle, it is best to consult your specialist dealer or the bicycle manufacturer in order to
do this.

Secure the bicycle to prevent it from toppling over, and make sure that the rear wheel
cannot drop out of the axle mount after the screw connection has been undone. Use for
example an assembly stand, or turn the bicycle upside down so that you can place it on
its saddle and handlebars.
In the as-delivered state, the supplied coupler is connected to the tow bar:
fUndo the cotter pin fastening and remove the coupler.
fThen insert the retaining cotter pin onto the tow bar
coupler pocket.
fPrepare the bicycle for mounting the coupler by
undoing the screw connection of the rear wheel axle:
–Quick-release axle: Open the bracket of the quick-release axle and unscrew the cap nut on
the other side of the rear wheel axle.
–Full axle: Unscrew the nut on the left side of the rear wheel axle.
fMount the coupler on the rear wheel axle:
–Place the large hole of the coupler onto the left side
of the rear wheel axle so that the coupler is facing
outwards.
–Screw on the dedicated nut and tighten it slightly.
–Align the rear wheel so that it can turn freely.
–Align the coupler so that it faces horizontally to the
rear.
fArretieren Sie die Verbindung, um das Hinterrad zu sichern:
–Quick-release axle: Tighten the cap nut until you can close the clamp with a certain amount
of pressure.
–Full axle: Tighten the nut with a spanner. Always pay attention to the bicycle manufacturer’s
notes about the tightening torque.

The axle nut must be tightened in order to assure sufficient clamping force. Therefore,
observe the assembly instructions for the hub and the manufacturer’s torque
specifications when tightening the axle nut.


Due to the construction of the coupler, slight wear and tear in the form of scratches can
occur at the connection between bicycle frame and coupler. This is not a reason for a
complaint.

Do not use a washer or similar at the connection between the bicycle frame and coupler
because this could negatively affect the stability of the connection.

The provided universal coupler is suitable for mounting on the most rear-wheel models.
If it does not fit your bicycle, find a suitable adapter and special couplers in our manuals
on the following website: www.qeridoo.de/kupplungsleitfaden

Do not use a tool that has previously been in contact with conventional steel. Smallest
steel particles could be transferred that could lead to contact corrosion.

In trailer mode, a certified rear light must be used during poor visibility or darkness in accordance
with the Road Traffic Licensing Requirements.
fMove the push handle to the lowest position.
fMount the rear light below the left joint of the push
handle.

Follow the attached manufacturer's information for the work of the rear light.

Kidgoo 2018 Subject to change. – 06|2018 – 21
20 – 06|2018 – Subject to change. Kidgoo 2018

Below you will find all the information for adapting the Kidgoo to the required modes and to
allow you to use all the convenience functions.


Apply the parking brake to secure the Kidgoo in order to prevent it from rolling away.
Also remember to release it before you set off.
fStand behind the cabin and hold it firmly at the push
handle.
fPress the parking brake with your foot down until it
clicks audibly to block the wheels.
fTo release the brake, place the tip of your foot under
the parking brake and pull it upwards until it clicks
audibly.

Use the two light grey pushbuttons to alter the height of the push handle. These are identified by the
word “PUSH”. You can set and engage the push handle at several levels in the 48 – 104 cm range.
fPress both pushbuttons and keep them pressed in
order to release the height adjustment.
fSwing the push handle to the desired height.
fRelease the two pushbuttons in order to activate the
engagement function.
fMove the push handle slightly up or down until the
height adjustment engages audibly.


You can use the Kidgoo in one of the following modes:
 Carrying children in the Kidgoo when cycling
 Using the Kidgoo like a buggy
 Carrying children in the Kidgoo when walking
The table below shows the main settings that you must make for particular components for the
respective mode:
Component Status of the components in mode
Trailer Buggy Walker
 must be completely
removed
fitted
(freely rotating)
fitted
(fixed)

directed forwards
(pay attention to tow
bar load!)
directed backwards directed backwards
Pennant must be mounted recommended recommended
 directed downwards comfortable height comfortable height

 –wrapped around a
wrist
wrapped around a
wrist
 must be fastened must be fastened must be fastened

must work in poor
visibility or darkness
(follow the Road Traf-
fic Licensing Require-
ments)
recommended in
poor visibility or
darkness
recommended in
poor visibility or
darkness
 the correct coupler
must be installed – –

Before every journey, make sure that necessary adjustments have been made for the
particular mode. For details of this, see the instructions in the following sections.

You must make the following settings, depending on the mode.
Removing the buggy wheel (Trailer mode)
The buggy wheel must not be fitted in Trailer mode, because in certain riding situations it can make
contact and cause serious accidents.
fSlightly lift the cabin at the front.
fPush the release button at the wheel mount and remove the buggy wheel completely.

Kidgoo 2018 Subject to change. – 06|2018 – 23
22 – 06|2018 – Subject to change. Kidgoo 2018

Carry the buggy wheel e.g. in the storage space in order to allow you to use the Kidgoo
flexibly at your destination. Instructions for re-mounting it can be found in the chapter
„Installing the buggy wheel“ on page16.
Setting the wheel so that it turns freely (Buggy mode)
It must be possible for the wheel to move freely through 360° in order to manoeuvre in Buggy mode.
fPush up the mode switch to release the wheel.
Securing the wheel (Walker mode)
In Walker mode, the wheel must not be at an angle to the direction of travel. You must lock the
wheel to run straight ahead in order to prevent abrupt blocking.
fPush down the mode switch to make sure the wheel is running straight.
fTurn the positioned wheel backwards until it engages audibly.

The tow bar can either be brought forward into the attachment position or carried along backwards
in the standby position. Pay attention also to the instructions in the chapter „Mounting the tow bar“
on page17.

Wrap the retaining strap of the tow bar around the tow bar several times to ensure it
does not hang down in the standby position. Otherwise it could become trapped on
obstacles.

The pennant must be attached in Trailer mode, see „Inserting the pennant“ on page16. For safety
reasons, we also recommend this for the other modes.

In Buggy and Walker mode, the hand strap secured to the push handle must be attached to your
wrist during every journey.

In every mode, the 5-point safety harnesses must be properly adjusted and every child must be
fastened in, see „Strapping in children“ on page25.


Loading the storage space
fUndo the magnetic closure of the storage space cover and lift it.
fPack larger items such as bags, toys or coats in the storage space. Also use the inside pocket
which is integrated into the cover.
fClose the cover carefully.


Loose objects and objects with sharp edges should only be stored in the sewn-in inner
pouch in the storage space to avoid them damaging the cover or injuring the child..
Filling the pouch for small items
fOpen the magnetic closure of one of the two small storage compartments.
fPack the utensils to which you want to have a quick access.
fClose the magnetic lock.
Using the pouch for small items
fPut the children’s drinking bottles or toys into the pouch for small items in the cabin’s foot
space.

When loading, pay attention to the total permissible weight and the weight limits for the
storage space, see „Performance limits“ on page4.
Kidgoo2
To achieve optimum load distribution, it is important for the load’s centre of gravity to be approxi-
mately in the middle of the cabin. In the as-delivered state, the 5-point safety harnesses are pre-ad-
justed for carrying two children. If you only want to carry one child, you must adjust the safety
harnesses so that the child can sit in the middle.

The optionally available accessories such as the baby seat, comfort insert etc. enable
you to optimally adapt the Kidgoo to suit the age and size of your children.
fUndo the upper fastener of the two inner harnesses.
fChange round their pads and tongues:
–Push the pad and the tongue of the inner left
harness onto the right harness.
–Push the pad and the tongue of the inner right
harness onto the left harness.
fSecure the belts using the belt buckles:
–Thread each end of the belt in the buckle as it is
shown in the picture.
–Be sure to check both belt buckles sit firmly.


Kidgoo 2018 Subject to change. – 06|2018 – 25
24 – 06|2018 – Subject to change. Kidgoo 2018

fPut the harness catch, including the pad, onto the
centre harness on the front of the seat. Use the
harness catch of the left or right seat to do this.
fRepeat this procedure in reverse order whenever you
require the safety harnesses for carrying two children.

Preparing the cabin
fApply the parking brake to secure the Kidgoo in order to prevent it from rolling away.
fLoosen both belt locks of the cover and unfold them completely.
fAdjust the safety harnesses to the number of children, see „Adjusting the safety harnesses
(Kidgoo2)“ on page23.
fOpen the safety harnesses required:
–Release the harness catch by pressing the
pushbutton.
–Pull the two tabs out of the belt buckle.
–Loosen the small locks which fix the belt cushions
in place.
Placing the children
fPut a suitable bicycle helmet on children or use the optional available head rests.
fLet the children get in one after the other, or lift them into the cabin.
fIf necessary, adjust the head rests and the backrest cushion by securing them to the seats at a
different height with the Velcro strips.

A balanced load distribution is particularly important in Trailer mode. If the two children
differ greatly in terms of their weight, you should therefore put the heavier child in
the right-hand seat. Interacting with the tow bar mounted on the left, this favourably
influences handling.


fHelp the child to put his/her arms through the two side parts of the 5-point safety harness.
fAdjust the seat belt, the belt pads and, if necessary, the head rests to the size of the child.
fInsert the tabs into the belt buckle until they click audibly.
fCheck that all parts of the 5-point safety harness fit properly and comfortably.
fClose the small locks to fix the belt pads if the belt pads of the 5-point safety belts are too
loose. However, always make sure that there is enough distance between the locks and the
child's neck (see the photo above).
fIf the child is too small for the 5-point seatbelts, then we recommend to use the accessories,
such as a baby seat or a seat reducer.
fClose the cover and secure it appropriately.

Before every journey, check that the safety harnesses and harness catches are sitting
correctly. Failure of the restraining function can result in serious or even fatal injuries in
the event of an accident. Start driving only when all children either wear a cycling helmet
or use a head rest and are properly belted.

An optimum weight distribution is important for safe handling: The load’s centre of gravity should
always lie in the centre of the wheel axle. The tow bar load with which the tow bar lies on the coupler
must be neither too great nor too low in Trailer mode:
Tow bar load too great (> 8 kg): Too much load on the coupler.
Tow bar load too low (< 3 kg): The trailer could reduce the traction of the rear wheel through
lifting and thereby cause critical situations in curves.
Center of gravity too far out: One-sided loading favors overturning in curves.

Distribute the load evenly across the width of the Kidgoo.
Check the tow bar load before every journey with a trailer. Tow bar loads outside the
permitted range of 3 – 8 kg cause critical handling performance.

Kidgoo 2018 Subject to change. – 06|2018 – 27
26 – 06|2018 – Subject to change. Kidgoo 2018

Checking the tow bar load
Use bathroom scales, for example, to measure the tow bar load:
fLoad the Kidgoo in the usual way and fasten the children in.
fDo not connect the trailer to the bicycle yet.
fPlace the bathroom scales next to the tow bar.
fGet onto the bathroom scales and note the weight displayed.
fLift the tow’s bar coupler pocket to the coupler height (ca. 35 cm).
fDetermine the tow bar load by making a comparison
with the previous measured value:
–The weight  than the
measured value without the tow bar.
–The weight  than
the measured value without the tow bar.
Changing the tow bar load
Adjust the tow bar load by moving or reducing your baggage:
fTow bar load over 8 kg: Move luggage to the back.
fTow bar load less than 3 kg: Move luggage to the front.
Total weight too heavy
fReduce the baggage weight in the pouch for small items.
fReduce the baggage weight in the storage space.
fMake sure that the loaded Kidgoo1 weighs less than 50 kg.
fMake sure that the loaded Kidgoo2 weighs less than 60 kg.


Do not connect the Kidgoo to a bicycle until the following conditions have been fulfilled:
The trailer is fully loaded.
The children wear a bicycle helmet or use a head rest and are properly belted.
The buggy wheel has been removed.
The tow bar load has been checked and is within the permissible range (3 – 8 kg).
fRemove the retaining cotter pin from the tow bar
coupler pocket.
fPush the tow bar onto the coupler of the bicycle so
that the cotter pin holes in the coupler and tow bar
couplet pocket are one above the other.
fInsert the cotter pin into the hole and lock the cotter
pin fastening.
fCheck that the connection between the coupler and
the tow bar is secure.

fGuide the tow bar’s retaining strap through the braces of the rear wheel so that the trailer is
securely connected to the bicycle frame.
fHook the retaining strap with the carabiner hook into the eye on the tow bar. Make sure that it
cannot flutter into the rear wheel’s spokes during the journey.

Always make sure the safety strap is in place before using the product in trailer mode.
In addition, make sure that the safety strap can not get into moving parts of the towing
bike.

Always secure the tow bar to the bicycle frame with the retaining strap. This ensures
that the trailer will remain connected even if the tow bar becomes detached from the
coupler.
Irrespective, the coupler must always be properly mounted and the connection to the
tow bar must be secured with the locked cotter pin. Otherwise the tow bar can be come
detached and can be pushed into the rear wheel’s spokes during braking.


Adjusting the 3-in-1 canopy
The 3-in-1 canopy is comprised of an insect net, an adjustable sun visor and a weather canopy:
The inner part of the 3-in-1 canopy must be closed during every journey because the integral
insect net provides protection against insects and small stones.
The outer skin of the 3-in-1 canopy is comprised of a durable transparent sheet and can be
rolled up. It provides protection against splah water and strong winds, and dissipates exhaust
gases out of the cabin.
Opening the weather canopy:
fOpen the zips attached on the sides which connect the
weather canopy to the insect net.
fThen loosen the lower Velcro fastener.
fRoll up the weather canopy and secure the roll at the
top with the two toggle fasteners.
Opening the weather canopy:
fOpen the top toggle fasteners and unroll the weather
canopy over the insect net.
fClose the both zips on the sides and the lower Velcro
fastener.

Kidgoo 2018 Subject to change. – 06|2018 – 29
28 – 06|2018 – Subject to change. Kidgoo 2018


Never ride with the cover open. As a minimum, the insect net must be closed in order
to provide protection against stones. In case of bad weather, dirty ground or in dense
traffic, also close weather canopy.
Using the ventilation windows
The purpose of the ventilation window of the Kidgoo is to improve air circulation in the cabin.
Right ventilation window:
fTo open, release the Velcro fastener of the window
film in the cabin and fold it down.
fTo close, secure the window film with the Velcro
fastener again.
Rear ventilation window:
fTo open, roll up the cover and lock it with the top
Velcro fastener.
fTo close, secure the cover with the Velcro fastener
again.

Open the ventilation windows on hot days or in heavy traffic in order to dissipate warm
air and exhaust fumes out of the cabin more quickly.
Using the sun visor
The sun visor is housed in the canopy between the insect
net and the splah water window. The length can be adjus-
ted with Velcro fasteners.
fRoll up the splash water window.
fFold the sun visor to the desired length and lock it with
the side Velcro fasteners.
fIf necessary you can also roll up the sun visor completely and close the splash water window
again.

fRemove the backrest cushion under the seat. This can be attached to the backrest for
additional comfort.


For storage, simply fold the Kidgoo together and store it in a protected and dry place without direct
sunlight. Please also consider the information in the chapter „Care“ on page30.

Hands or fingers can become trapped on moving parts while setting up and folding up
the cab. Carry out work carefully and keep children away from the vehicle.
fTake position behind the cabin and open the storage
space cover.
fPull both grey locks at the lower horizontal bar inwards
to release the rest lock.
fHold both grey locks and push the lower horizontal bar
forwards.

Only fold up the cabin after it has been cleaned both inside and outside and is completely
dry.
fFold up the cabin by pressing both sides of the rear
cabin frame all the way down.
fIn order to take up less space, you can also fold in the
push handle and remove the wheels.

Despite the use of weather proof material, the corrosion cannot be completely eliminated.
De-icing salts such as magnesium chloride can lead to stress corrosion cracking on the
components. In winter or in case of rain, it is also recommended to clean the trailer after
each ride with a dry cloth. In addition, a treatment with cleansers and preservatives such
as wax or spray oil every two weeks is recommended.

The Kidgoo has an air-leaf spring combination, which allows a constant stable position
of the trailer. This automatically adjusts to the conditions of use such as weight distribu-
tion and road conditions. Therefore, no adjustment must be made.

Kidgoo 2018 Subject to change. – 06|2018 – 31
30 – 06|2018 – Subject to change. Kidgoo 2018

Regular care and maintenance of all parts and components helps prevent premature wear and
keeps the Kidgoo ready for use at all times. This is particularly important when one of the following
influencing factors applies to your individual conditions of use:
Frequent use with high mileage
Regular use close to the maximum permitted total weight
A sporty riding style (sudden starting and braking, cornering at speed etc.)
Excessive weather influences such as UV radiation, temperature fluctuations, moisture,
contact with salt (sea water, salty air, road salt)
Unfavourable storing conditions (shortage of space, variations in temperature, sun light and
humidity)

It is essential to adhere to the following care instructions and maintenance intervals.
Perform the tests stated in the checklists conscientiously and at the specified times in
order to use the Kidgoo in a technically safe condition.
Replace damaged components immediately, see „Spare parts“ on page 34. If
necessary, contact our service department or your local specialist dealer, see „Support
information“ on page33.
Care

For cleaning, use only water and domestic care agents such as detergents and textile
care products, soft cloths or impregnation and silicone spray. Do not use any sharp
edged tools or cleaning agents with a scouring effect. Cleaning agents containing acids
and solvents are also not permitted.

Clean the inside of the cabin.
Pay attention to coarse dirt and remove it immediately if possible.

Clean the inside and outside of the cabin thoroughly.
Care for all sliding or moving parts with silicone spray.
Only fold up the cabin after it has been cleaned and is completely dry.

Store the Kidgoo only in places where the storage temperature falls within the range of -23 °C
to maximum 65 °C.
The trailer should only be stored folded when completely dry.
The storage location should be dry, well ventilated and protected against direct sunlight.
At higher storage temperatures, you should store the wheels separately from the cabin
because the tyres’ rubber can cause odours.
Use a Qeridoo folding garage if the Kidgoo must be kept outdoors.


Replace corroded steel and aluminium parts immediately.
Never bend back deformed or bent aluminium parts (danger of breakage). Replace
bent aluminium parts immediately.
Immediately replace plastic parts that have become porous or fragile due to the
effects of the weather, for example.

Check that the wheels are secure. The push-in axles must be engaged in the axle mount and it
must not be possible to pull them off without pressing the rubber cap.
Check the air pressure in the wheels. It should be in the range of 2.5 – 3.5 bar.
Check the air pressure of the buggy wheel (maximum air pressure: 1.9 bar).
Check the total weight, including children and baggage.
Check the fasteners of the cover and close them if necessary.
Inspect all harnesses on the back and under the cabin to make sure that they are secure. They
must be firmly tightened to hold the cover and backrest securely.
Trailer mode: Make sure that the buggy wheel has been removed and that the requirements
described in the chapter „Connecting the trailer to a bicycle“ on page26 have been fulfilled.
Buggy mode: Make sure that the buggy wheel can rotate freely. Put the hand strap of the push
handle around your wrist in order to prevent accidental rolling away.
Walker mode: Make sure that the buggy wheel is secured facing straight ahead. Put the hand
strap of the push handle around your wrist in order to prevent accidental rolling away.
Check whether the tow bar, coupler and buggy wheel and their attachments are technically OK.
Check the condition of the wheels. Replace covers and hoses in good time.

Check the textile cover, all fasteners, the seats and the safety harnesses for cracks, wear and
missing parts.
Inspect all frame tubes and all connecting pieces and fastening components for signs of wear
and damage.
Check that all screw and cotter pin connections are secure.

Care for all sliding and moving parts with silicone spray.
Clean the inside and outside of the cabin thoroughly.

Have a full inspection carried out by a specialist workshop no later than every three years.


Kidgoo 2018 Subject to change. – 06|2018 – 33
32 – 06|2018 – Subject to change. Kidgoo 2018


External dimensions Kidgoo1 Kidgoo2
Length (Trailer mode) 151cm 151cm
Width (external width from wheel to wheel) 72cm 82cm
Height (from ground to cabin roof) 87,5cm 87,5cm
Height of push handle (lowest / highest set
dimension)
48cm /104cm 48cm /104cm
Pack size of the collapsed cabin (H x W x L) 40.5x68.5x112cm 40.5x78.5x112cm
Internal dimensions Kidgoo1 Kidgoo2
Seat width (max. width at shoulder height, across
both seats)
52cm 62cm
Seat height (max. height between seat and cabin
roof)
70cm 70cm
Legroom (max. length between backrest and foot
rest)
52cm 52cm
Storage space back approx. 45 l approx. 55 l
Weights Kidgoo1 Kidgoo2
Weight trailer-mode
(cabin, wheels, push handle, tow bar)
16.2kg 17.6kg
1 x 20" wheel / 1x buggy wheel / 1x tow bar 1.4kg/1kg/ 0.61kg 1.4kg/1kg/0.63kg
Wheels Kidgoo1 and Kidgoo2

Type 20" spoked wheel, push-in axle
Tyres 20x1.75 (47-406)
Hose size 20", 20–50mm wide
Valve type wide (Schrader)
Air pressure 2.5–3.5bar

Type 8.5"-wheel (pneumatic tyre)
Valve type Car valve (Schrader)
Maximum air pressure 1.9bar
Ambient conditions Kidgoo1 and Kidgoo2
Storage location Dry, ventilated, no direct sunlight
Temperature range for storage -23°C–65°C


Qeridoo provides a two-year warranty commencing on the purchase date for plastic and
cover parts, as well as for load-bearing components. This warranty covers only material and
manufacturing faults arising on correctly used and maintained vehicles. In particular, the
terms and instructions in the user manual that you received with your vehicle are definitive
in this respect.
Under no circumstances shall Qeridoo be liable for material damage or injury
attributable to improper assembly, the intentional alteration of components
or the non-observance of warning and maintenance notices. Warranty claims
for defects resulting from accidents or other external forces, and caused by
premature wear due to frequent and intensive use are also normally excluded.
Commercial use such as rental or use for competitive purposes is deemed improper use and
isnotcovered by the warranty at all.
This warranty applies solely to the first owner and is non-transferable. Verbal agreements,
restrictions or reservations that go beyond the terms specified here have no bearing on the
validity of this warranty. The warranty regulations pertaining to your region also apply.

You can easily register a warranty case online (http://service.qeridoo.de) that guarantees
you easy processing.
With your complaint, please provide an exact description of the fault (if possible with
photos) and a copy of the original purchase receipt. Please also state the vehicle’s serial
number. You can find this on the label or on the frame rod assembly in the storage space.

Please contact us directly if you have any questions about our products:

Industriepark Nord 100 URL: www.qeridoo.de 
53567 Buchholz Mail: [email protected] 
Germany Fax: [phone] (Mon. – Thu.: 9 am – noon & 2 pm
– 4 pm;
Fri 9 am – noon)
You can find our  on the Internet at:
http://haendlersuche.qeridoo.de

217
16
15
14
13
12
11
1 18
3
4
5
6
7
8
9
10

(valid from 2018)
Kidgoo 2018 Subject to change. – 06|2018 – 35
34 – 06|2018 – Subject to change. Kidgoo 2018


Pos. Article Article No.
Kidgoo1
Article No.
Kidgoo2
1Tow bar head with hexagon socket from 2018 Z-DEIK-6K-18 Z-DEIK-6K-18
2Coupling bicycle connection accessory from 2018 KUFA-18 KUFA-18
3Cotter pin with rubber safety for bicycle coupling from 2018 Z-SMGFFK-18 Z-SMGFFK-18
4Multiwheel from 2017 set BR-17-SET BR-17-SET
5Buggywheel adapter middle part from 2017 BRAM-17-SET BRAM-17-SET
6Axle for Kidgoo1 from 2018 AKG1-18-SET AKG2-18-SET
7Lower tube Kidgoo folding mechanism from 2018  
8Upper frame Kidgoo folding mechanism set from 2018 OREKG1F-SET OREKG2F-SET
9Joint top fold mechanism Kidgoo from 2018 Y-GOFK-18 Y-GOFK-18
10 Handlebar Kidgoo set HGKG1-18-SET HGKG2-18-SET
11 Wheel guard and safety bumper set round frame from 2018 RARR-18 RARR-18
12 Outer rod Kidgoo Y-USKG1-18 Y-USKG2-18
13 Wheel complete 20" from 2018 RAD-20-18-SET RAD-20-18-SET
14 Leaf suspension cover set from 2018 BFA-18-SET BFA-18-SET
15 Rubber cap 20" Wheel from 2018 Y-GUKA20-18 Y-GUKA20-18
16 Wheel guard set square frame from 2018 RAER-1 RAER-1
17 Tow bar mount set from 2018 DEA-18-SET DEA-18-SET
18 Tow bar complete from 2018 DEI-1-18 DEI-2-18


Locking button tow bar mount
from 2018
Art.-Nr.: 
Brake pedal plastic V2 from 2018
Art.-Nr.: 
Air suspension Kidgoo
from 2018
Art.-Nr.: 
Hitch pin with notch Ø8x36
from 2018
Art.-Nr.: 
Locking ring for hitch pin
from 2018
Art.-Nr.: 
LED back light from 2018
Art.-Nr.: 
Kidgoo1 Cover
Art.-Nr.: (anthracite)
Art.-Nr.: (Blue)
Art.-Nr.: (Green)
Kidgoo2 Cover
Art.-Nr.: (anthracite)
Art.-Nr.: (Blue)
Art.-Nr.: (Green)
Kidgoo1 Cover top
Art.-Nr.: (anthracite)
Art.-Nr.: (Blue)
Art.-Nr.: (Green)
Kidgoo2 Cover top
Art.-Nr.: (anthracite)
Art.-Nr.: (Blue)
Art.-Nr.: (Green)
Back rest from 2018
Art.-Nr.:  (Kidgoo1)
Art.-Nr.:  (Kidgoo2)
Toggle fastener with strap
Art.-Nr.: 
Harness buckle
Art.-Nr.: 
Belt padding from 2018
Art.-Nr.: 
Crotch padding from 2017
Art.-Nr.: 
Head rest from 2017
Art.-Nr.: 
Back pad
Art.-Nr.: 
Art.-Nr.: 
Harness catch
Art.-Nr.: 
Light reflector, white
Art.-Nr.: 
Light reflector, red
Art.-Nr.: 
20" hose
Art.-Nr.: 789SCH
Hub axle with locking nut set
from 2018
Art.-Nr.: 
Plug connection Ø22.2 from 2017
Art.-Nr.: 
Pennant holder, centre piece
Art.-Nr.: 
Pennant, complete
Art.-Nr.: 121256
Wheel cover
Art.-Nr.: RDSH

Kidgoo 2018
Rev. 170618#1505

Industriepark Nord 100
53567 Buchholz
Germany
www.qeridoo.de
[email protected]