Qualcast CLGT1825D User manual

Instruction Manual
Important - Please read these instructions fully before starting assembly
These instructions contain important information that will help you get the best from
your mower, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline
on 0845 077 8888.
Qualcast
18V Lithium-ion Cordless Grass Trimmer
Sep 2012
UK/Ireland 0845 077 8888
Republic of Ireland 0124 77708
Web www.homebasespares.co.uk
After Sales Support

Contents
2
Customer Helpline 0845 077 8888
Safety Information.......................................................................................................................................... 3
Warning Symbols.........................................................................................................................................3
General Safety..............................................................................................................................................4
Personal Safety ............................................................................................................................................4
Power Tool Use and Care............................................................................................................................5
Service ..........................................................................................................................................................5
Additional Safety Rules for Line Trimmers .................................................................................................5
Unpacking ....................................................................................................................................................6
In the Box .........................................................................................................................................................7
Parts..............................................................................................................................................................7
Assembly ..........................................................................................................................................................8
Fitting the Guard ..........................................................................................................................................8
Adjusting the Secondary Handle ................................................................................................................9
To Remove or Install Battery Pack .............................................................................................................9
Usage..............................................................................................................................................................10
Adjusting the Telescopic Handle ..............................................................................................................10
Adjusting the Front Handle .......................................................................................................................10
Head Angle Adjustment.............................................................................................................................11
Edging.........................................................................................................................................................11
Operating Instructions & Tips .......................................................................................................................12
Before Starting ...........................................................................................................................................12
Increasing the Cutting Line Length...........................................................................................................13
Switching ON and OFF..............................................................................................................................14
Trimming .....................................................................................................................................................15
Changing a Line Spool ..............................................................................................................................15
Flower Guard..............................................................................................................................................16
Compact Body Size...................................................................................................................................16
Installing Battery In Charger......................................................................................................................17
Maintenance...................................................................................................................................................18
Storage .......................................................................................................................................................18
Troubleshooting .............................................................................................................................................19
General Troubleshooting ...........................................................................................................................19
Technical Data................................................................................................................................................19
Technical Data Table..................................................................................................................................19
Disposal..........................................................................................................................................................20
Disposal and Recycling.............................................................................................................................20
Getting Help ...................................................................................................................................................20

Important - Please read these instructions fully before starting assembly
3
Customer Helpline 0845 077 8888
The following warning symbols appear throughout this assembly manual and indicate the appropriate
safety measures you should take when assembly and operating the hedge trimmer.
Take extra care, beware of hazards.
Read instruction manual.
Warning - To reduce the risk of injury, user must read instruction manual.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards for electromagnetic compatibility.
Use at a distance of at least 5m from other people.
Do not use the machine in the rain or leave it outdoors when it is raining.
Pay attention that bystanders are not injured by objects thrown out from the machine.
Sharp blade.
Noise level specication Lwa in dB.
Do not dispose of electrical equipment in domestic waste.
Warning Symbols
N380
Safety Information

Important - Please read these instructions fully before starting assembly
4
Customer Helpline 0845 077 8888
IMPORTANT! All operators must read these instructions before use.
WARNING! Read all safety warnings and all instructions. Failure to follow all warnings, and instructions may
result in electric shock, re or serious injury.
Save all warnings and instructions for future reference
Work Area
• Keep work areas clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tired or under the inuence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
• Avoid accidental starting. Ensure the switch is in the o-position before plugging in. Carrying power
tools with your nger on the switch or plugging in power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in personal injury.
• Ensure you always have proper footing and balance. This will provide better control of the power tool
in unexpected situations.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of collection facilities ensure that these are connected and
properly used.
General Safety
Personal Safety
Safety Information

Important - Please read these instructions fully before starting assembly
5
Customer Helpline 0845 077 8888
• Do not use the power tool for applications that are beyond it’s capacity. Use the correct power tool for
your application. The correct power tool will do the job better and more safely at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn it ON and OFF. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the battery from the power source before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store the tool out of the reach of children. Do not allow people unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Always maintain the power tool in good working order. Check for misalignment or binding of moving
parts, breakage of parts, or other conditions that would aect it’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting attachments with sharp cutting
edges are less likely to bind and are easier to control.
• Only use the tool, accessories, and attachments as described in these instructions. Using the tool for
operations it is not intended for could cause damage to the tool and hazardous situations. Always
consider the working conditions and the work to be performed.
• Have the power tool serviced by a qualied repair personnel using only manufacturer’s recommended
replacement parts. This will ensure that the safety of the power tool is maintained.
• Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes,
hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long
trousers, work gloves, a hard hat and hearing protection.
• When starting up and when the tool is in operation, keep the cutting section away from all parts of
the body, especially the hands and feet.
• Do not start the tool when it is upside down or when it is not in the operating position.
• Switch the motor o and remove battery when the tool is not being used, left unattended, being
cleaned, being moved from one place to another or when the spool is being changed or the length of
line manually adjusted.
• Do not operate the tool near people, especially children or pets. Turn it o if they get too close.
Maintain a safe distance of at least 5m from other people when using the tool.
• Keep a balanced and stable stance while using the tool.
Power Tool Use and Care
Service
Additional Safety Rules for Line Trimmers
Safety Information

Important - Please read these instructions fully before starting assembly
6
Customer Helpline 0845 077 8888
• Ensure that the area being cut is free from strings, stones and debris.
• Do not cut against hard objects. This could cause injury to the operator and damage to the tool.
• Never use the tool without the guard. Never use the tool if the guard is damaged.
WARNING! The guard is vital for your and other people’s safety and for the tool’s operating eciency.
• Do not try to stop the cutting device (nylon line) with your hands. Always let it come to a stop by itself.
WARNING! After switching o the tool, the cutting device continues to rotate for a few more seconds.
• Only use the original type of nylon line. Under no circumstances use metal line instead of nylon.
• Do not use the tool to cut grass which is not on the ground. For example, do not cut grass which is on
walls or rocks.
• Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inammable
and/or explosive substances such as liquids, gasses and powders.
• Only cut during broad daylight or with adequate articial light.
• Check that all grass cuttings and dirt have been removed from the ventilation vents.
• Do not cross roads or gravel paths with the tool still running.
• When the tool is not in use, store it in a dry place and out of reach of children.
• After use, disconnect the tool from the power supply and check for damage. If you have the slightest
doubts, contact an authorized service center.
• Only use the tool according to the instructions given in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts. Contact authorized service centers only.
• Do not get distracted and always concentrate on what you are doing. Use common sense. Never
operate the tool when you are tired, sick or under the inuence of alcohol or other drugs.
Additional Safety Rules for Line Trimmers (continued)
Safety Information
Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is
missing. If you nd anything wrong, do not operate the tool until the parts have been replaced or the fault
has been rectied. Failure to do so could result in serious personal injury.
Unpacking

7
Customer Helpline 0845 077 8888
1Battery
2Handle
3Trigger switch
4Lock-o button
5Handle adjustment
button
6Secondary handle
7Telescopic shaft
adjustment lock
8Telescopic shaft
9Head adjustment
button
10 Motor housing
11 Flower guard
12 Nylon line
13 Automatic feed spool
14 Debris shield
15 Line cutting blade
16 Battery charger
17 Trimming/edging
locking system
In the Box
Parts
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
17
1
16

8
Customer Helpline 0845 077 8888
2. Align the 3 screw holes in the guard with the screw holes in the base of the unit.
3. Attach the ower guard 11 to the motor housing.
Note! Sharp blade
Fitting the Guard
Assembly
2
4
3
11

9
Customer Helpline 0845 077 8888
5. To adjust the secondary handle 6press in the secondary handle buttons and rotate the handle to the
desired position then release the buttons to lock it into place.
Adjusting the Secondary Handle
Assembly
5
6
6. Locate the latch on back of the battery 1to release the battery from the trimmer. Remove battery pack
from your grass trimmer. After recharging the battery pack insert it into the battery slot of the trimmer and
ensure it clicks rmly into place.
To Remove or Install Battery Pack
6
1

10
Customer Helpline 0845 077 8888
Usage
7a. Loosen the telescopic shaft adjustment locking system 7, adjust the shaft 8to a comfortable
height. Make sure to tighten the sleeve once the desired length is found.
Adjusting the Telescopic Handle
7a
8 7
Adjusting the Front Handle
7b

11
Customer Helpline 0845 077 8888
8a. The head can be adjusted so that it is horizontal with the ground, this feature helps you get access to
areas such as under bushes and garden furniture.The shaft can be lowered by pressing the adjustment
button 9and set to the desired angle.
Head Angle Adjustment
8a
9
8b. The head can be twisted for edge cutting along borders. Loosen the locking system 17 at the top of
the shaft, twist the handle to the desired position and then re-tighten the locking system. Now adjust the
head angle (adjustment button 9, Fig.8a to obtain the correct head angle as shown in Fig.8b, edging).
Edging
Usage
8b
17
17
9

12
Customer Helpline 0845 077 8888
The battery pack for this tool has been shipped in a low charge condition. You should charge the battery
pack fully before use.
Before use, follow these steps to check that the tool is working properly and the length of the line is
correct:
• Your trigger switch is locked OFF to prevent accidental starting. Depress lock o button 4then the
ON/OFF trigger switch 3and release lock o button 4, your switch is now ON. To switch OFF just
release the ON/OFF trigger switch 3.
• Examine the general condition of the tool. Inspect the guard, switch, cord set. Check for loose screws,
misalignment, binding of moving parts, improper mounting, broken parts and any other condition
that may aect its safe operation. If abnormal noise or vibration occurs during operation, turn the line
trimmer o immediately and have the problem corrected.
• Ensure that you are on a at surface and have secure footing.
• Check that the line touches or extends beyond the edge of the guard.
Before Starting
Operating Instructions & Tips
9
3
4

13
Customer Helpline 0845 077 8888
• Before the rst cutting, ensure the cutting line is the correct length. If the line is too short, remove the
spool cover by depressing the 2 tabs on either side of the spool housing (g 10).
• Gently pull out sucient line from the spool to ensure it extends a few centimeters past the edge of
the guard,
• Reload the spool and lock the cover. Ensure it locks back rmly into position (g 11).
• During operation to increase the cutting line simply switch the line trimmer o and then on again, this
with restore the line to the correct length. The blade knife on the grass guard ensures the cutting line
is trimmed to the correct length.
Increasing the Cutting Line Length
Operating Instructions & Tips
10 11

14
Customer Helpline 0845 077 8888
• Slide the the fully charged battery into the battery housing underneath the handle.
• Press the lock-o button 4, then press the trigger switch 3.
• To switch OFF, release the trigger switch.
WARNING! The tool runs for approximately 5 seconds after it has been switched o. Let the motor come to
a complete standstill before setting the tool down.
Switching ON and OFF
Operating Instructions & Tips
12
3
4

15
Customer Helpline 0845 077 8888
WARNING! Ensure the work area is free from rocks, debris, lines and other foreign objects.
• Start the trimmer before approaching the grass to be cut.
• The automatic line feed mechanism releases 12mm of line when the trimmer reaches a certain speed.
If you need the spool to release more line, release the trigger to slow the rotation speed then squeeze
the trigger again and continue trimming. As the speed picks up the automatic line feed will release a
further 12mm of nylon line.
• Cut the grass by swinging the trimmer from right to left and proceed slowly keeping the trimmer
inclined forwards at an angle of about 30°. In longer grass, cut from top to bottom in stages to allow
the cut grass to fall away from the spool preventing the grass from wrapping around the spool.
• Do not cut damp or wet grass. Do not overload your trimmer.
• Avoid wearing the line out quickly by knocking against hard objects (stones, walls, fences etc.).
• Be alert for possible kickback when there is impact with hard objects.
• After nishing the cutting operation, keep the head close to ground level, release the switch, and
allow the motor to come to a complete standstill.
Note! Periodically clean out the grass between the spool and the rim of the guard to prevent the tool
from vibrating.
WARNING! The line cutting blade on the grass guard is sharp. Take extra care, wear protective gloves.
• Turn the line trimmer upside down.
• Hold the spool holder rmly with one hand and with the other hand squeeze the tabs on either side
of the spool cover and remove the cover.
• Remove the empty spool and clean out the spool cover.
• Align the cutaway sections in the spool opposite the eyelets and thread the line of the new spool
through the eyelet in the spool holder and insert the spool.
CAUTION! After changing the line spool, run the trimmer under no load for at least a minute to verify the
line and the tool are both operating correctly. Use only the line spool as recommended by the manufacturer.
Trimming
Changing a Line Spool
Operating Instructions & Tips

16
Customer Helpline 0845 077 8888
The ower guard acts as a guide to help avoid damaging owers and plants. It can be folded into a vertical
position when not needed.
13
Operating Instructions & Tips
Flower Guard
For convenient carrying and storage
14
Compact Body Size

17
Customer Helpline 0845 077 8888
Operating Instructions & Tips
Installing Battery In Charger
15
Note!
• Connect the plug of charger with battery (g 4).
• The red indicator light will come ON when the charger is connected to the mains supply.
• The red light stays on when the battery is charging.
• The green lights stays on continuously when the battery is fully charged. It can be removed and used
immediately.
Note!
• A new battery or one that is completely run down should be charged for 6 hours (for rst charge).
After normal use, a battery should be fully charged in 3-5 hours.
• It is normal for the battery charger to hum and be warm to the touch during operation.
• If the battery does not charge properly, check to make sure the electrical outlet is “live” and that the air
surrounding the battery and charger is between 10ºC (50ºF) and 40ºC (105º F).
• Unplug the charger when not in use and store it in a dry, secure place.
• Always remove the battery pack and store it in a dry, secure place when the trimmer is not in use.
• Battery charging should only be carried out indoors.
WARNING! Never leave a battery on charge if it becomes hot or the red light stays on.

18
Customer Helpline 0845 077 8888
Maintenance
Storage
1. Keep the trimmer out of direct sunlight.
2. Do not store in a nylon bag as this can encourage the formation of mold.
3. At the end of the season, give the trimmer a complete cleaning and a thorough check.
4. Do not leave the trimmer resting on the oor for extended periods as it could cause the shape of the
guard to alter, posing a safety risk. Hang it o the oor by the top handgrip.
Electrical Safety for Charger
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, or other mains
appliances. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
• Do not charge appliance in rain, or in wet locations
• Do not use battery operated appliance in rain
• Remove or disconnect battery before servicing, cleaning or removing material from the gardening
appliance.
• Use only the battery recommended by manufacturer.
• Do not dispose of the battery(ies) in a re. The cell may explode. Check with local codes for possible
special disposal instructions.
• Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to short the battery with conducting materials such as
rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

19
Customer Helpline 0845 077 8888
General Troubleshooting
Troubleshooting
The following table provides solutions to common problems encountered with the hedge trimmer.
Fault Possible Cause Solution
Product does not start Battery pack not properly
inserted
insert properly
Battery pack discharged Remove and charge battery
pack
Battery pack damaged Check by a specialist electrician
Other electrical defect to the
product
Check by a specialist electrician
Product does not reach full
power
Battery pack capacity too low Charge battery pack
Air vents are blocked Clean the air vents
Unsatisfactory result Cutting device worn or
damaged
Replace with a new one
Technical Data Table
Technical Data
Specification Value
Battery Power 18V 1.5Ah
No Load Speed 8800 min-1
Tool Weight 4.32 lbs./1.96 Kg
Cut Diameter (swath) 250mm
Line Thickness 1.5mm
Cutting line length 1x13ft (1x4.0m)
Battery pack 1x18V Li-ion
Charger input 230V~240V a.c. 50Hz 17W
Charger output 23V d.c. 400mA
Battery full charge time 3-5hr Approx.

20
Customer Helpline 0845 077 8888
Disposal and Recycling
Getting Help
Disposal
Do not dispose with household waste.
Recycle products and components according to local legal requirements.
After sales helpline number: 0845 077 8888
Spare parts purchases: www.homebasespares.co.uk