Quality Lifesciences MOSKITRAP FFN-302-2T User manual

MOSQUITO REPELLENT
INSTRUCTION MANUAL
Model:FFN-302-2T
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE APPLIANCE.
KEEP MANUAL IN A SAFE PLACE FOR EASY REFERENCE.
How to use
1. As the photo shows, press
switch button, LED lamp turns to
blue then working.
2. When it is working, press
switch button again, LED lamp
turns to off then stop working.
3. When battery is low, LED
lamp turns to red and starts to
flash, it needs to recharge at
time.
4. Use 5V and 1A or 2A phone
charger, power adapter, power
bank, USB connection port to
recharge.
5. Connect USB cable to
product USB-C micro socket.
6. When fully charged, LED
lamp turns to off from red.
1.Power off before doing any cleaning.
2.Take out small brush then clean dust of
exhaust outlet and exhaust inlet.
How to Clean

Input voltage：DC5V
Power：4.5W
Battery：1500mAh
Features
One button touch switch
1500mAh batteryDouble side windy design
Essential oil mosquito repellent
Centrifugal fan blade design Protective structure(anti-mosquito core)
Notice
Forbidden Points
1.Please avoid direct sunlight when using or storing the machine.
2.Keep the product away from the fire.
3.It is forbidden for allergic people. If there is any adverse reaction during use, please stop using immediately.
4.Do not disassemble the original body at will.
5.Do not use in case of fault or damage.
6.Do not spray other types of insecticides on this product.
Attention
1. If the connecting wire or fan is damaged, in order to avoid risks, it must be handed over to professional
personnel for repair or change.
2.Care should be taken of children to ensure that they do not play with the product.
3.Operate the product according to the instruction. To ensure the normal operation of the product, please use
the spare parts which provided by manufacturer.
4.When the product is working, please avoid water or wipe the product directly with a wet towel.
5.Please prevent to block anything into product’s exhaust inlet or exhaust outlet.
CLEANNING AND MAINTENANCE
1.Please turn off the product and power off before doing any cleaning.
2.Operate the product according to the instruction. To ensure the normal operation of the machine, please use
the spare parts which provided by manufacturer.
3.The effective time of repellent parts is 2 or 3 weeks, in order to achieve better using, suggest to replace
repellent parts regularly.
4.Suggest to use the small brush to clean the mesh parts every week.
Working principle
This product is a portable mosquito repellent product with portable bandage suitably use at baby carriage, baby
bed, table foot, chair foot etc using environment.
Double side windy
design all protects
away from mosquitoes.
100% plant extract formula
with strong anti-mosquito
effect, safe and natural for
mother and baby
Centrifugal fan blade design,
anti-mosquito more effective.
Items & Parts
Repellent parts
Exhaust inlet
Exhaust
outlet
Strap
USB-C inlet
Switch button
Indicator light
USB cable
How to install the repellent parts
3、To ensure the effect , it is suggested to change the repellent
parts after 2 or 3 weeks.
4、To change new repellent parts, you need to remove the
previous one (Rotate anti-Clockwise with pressure) before
above step 1 & 2.
1、Remove the Aluminium film of Part A, insert the Pin of Part B into the hole of Part A to be Part C.
2、Insert the Pins of Part C into the top hole of the device,rotate Clockwise with pressure.
A
BC