Quanmax QBOX-2060 User manual

I
QBOX-2060 User’s Manual
QBOX-2060
Fanless BOX PC with Dual Core Intel® Atom™
Processor D2550
User’s Guide

II
QBOX-2060 User’s Manual
Contact Info: Quanmax Inc.
4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District,
Taipei 114Taiwan
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2012 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others.
Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade
names used in this user’s guide are the property of their respective owners. All rights reserved. This
user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s
guide in other publications. Customers may alter this user’s guide and publish it only after they remove
the Quanmax name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this user’s
guide.
Revision Date Edited by Changes
1.0
2012/03/23 Betsy
Initial Release

Content
3
QBOX-2060 User’s Manual
Content
Content ....................................................................................................................... 3
Figures ....................................................................................................................... 4
Tables ......................................................................................................................... 5
Safety Instructions ...................................................................................................... 6
Before You Begin ......................................................................................... 6
When Working Inside a Computer ............................................................... 7
Preventing Electrostatic Discharge .............................................................. 8
Instructions for Lithium Battery .................................................................... 9
Preface ..................................................................................................................... 10
How to Use This Guide .............................................................................. 10
Unpacking .................................................................................................. 10
Regulatory Compliance Statements .......................................................... 10
Warranty Policy ......................................................................................... 11
Maintaining Your Computer ....................................................................... 12
Chapter 1 Introduction ........................................................................................... 15
Overview ................................................................................................... 15
Product Specifications ............................................................................... 16
System Tour ............................................................................................... 17
Mechanical Dimensions ............................................................................. 19
Chapter 2 Getting Started ...................................................................................... 20
Setting up your PC .................................................................................... 20
Chapter 3 AMI BIOS Setup .................................................................................... 25
Overview ................................................................................................... 25
Main Menu ................................................................................................. 26
Advanced Menu ......................................................................................... 27
Boot Menu ................................................................................................. 38
Security Menu ............................................................................................ 39
Save & Exit Menu ...................................................................................... 39
Chapter 4 D river Installation .................................................................................. 41

Figures
4
QBOX-2060 User’s Manual
Figures
Figure 1 Front Panel .................................................................................. 17
Figure 2 Rear Panel ................................................................................... 18
Figure 3 Mechanical Dimensions ............................................................... 19
Figure 4 DVI-I / HDMI ................................................................................ 20
Figure 5 Connect USB mouse & keyboard ................................................ 21
Figure 6 RJ45 connector ............................................................................ 21
Figure 7 Com ports .................................................................................... 22
Figure 8 DIO port ....................................................................................... 23
Figure 9 Turning on the system .................................................................. 24

Tables
5
QBOX-2060 User’s Manual
Tables
Table 1 QBOX-2060 Specification .............................................................. 16
Table 2 BIOS Main Menu ........................................................................... 26
Table 3 Advanced Menu ............................................................................. 27
Table 4 Advanced Menu – Display Configuration ....................................... 28
Table 5 Advanced Menu –Power Management Configuration .................... 29
Table 6 Advanced Menu –CPU Advanced Configuration ........................... 30
Table 7 Advanced Menu –SATA Configuration ........................................... 31
Table 8 Advanced Menu –USB Configuration ............................................ 31
Table 9 Advanced Menu –DIO Configuration ............................................. 32
Table 10 Advanced Menu – Super IO Configuration .................................. 33
Table 11 Advanced Menu – Super IO Configuration – Serial Port 1
Configuration ............................................................................... 33
Table 12 Advanced Menu – Super IO Configuration – Serial Port 2
Configuration ............................................................................... 34
Table 13 Advanced Menu – Super IO Configuration – Serial Port 3
Configuration ............................................................................... 35
Tabl e 14 Advanced Menu – Super IO Configuration – Serial Port 4
Configuration ............................................................................... 36
Table 15 Advanced Menu –H/W Monitor .................................................... 37
Table 16 Boot Menu ................................................................................... 38
Table 17 Security Menu ............................................................................. 39
Table 18 Save & Exit Menu ........................................................................ 39

Safety Instructions
6
QBOX-2060 User’s Manual
Safety Instructions
 Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.
 Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
 Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
 Access can only be gained by service persons or by users who have
been instructed about the reasons for the restrictions applied to the
location and about any precautions that shall be taken; and access is
through the use of a tool or lock and key, or other means of security,
and is controlled by authority responsible for the location.
WARNING
High voltages are present inside the chassis when the unit’s power cord is
plugged into an electrical outlet. Turn off system power, turn off the power
supply, and then disconnect the power cord from its source before
removing the chassis cover. Turning off the system power switch does not
remove power to components.
The product chassis may be hot when the system is working. Please do
not touch the surface before turn off the system power and wait for
about 5 minutes until the system cools down.

Safety Instructions
7
QBOX-2060 User’s Manual
 When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
 To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
 When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable. As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins. Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this
user’s guide. Follow installation and troubleshooting instructions closely.

Safety Instructions
8
QBOX-2060 User’s Manual
 Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
 When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.
 When transporting a sensitive component, first place it in an antistatic container
or packaging.
 Handle all sensitive components at an ESD workstation. If possible, use
antistatic floor pads and workbench pads.
 Handle components and boards with care. Don’t touch the components or
contacts on a board. Hold a board by its edges or by its metal mounting bracket.
 Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.

Safety Instructions
9
QBOX-2060 User’s Manual
 Instructions for Lithium Battery
WARNING
Danger of explosion when battery is replaced with incorrect type. Only replace
with the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery
according to the local regulations dealing with the disposal of these special
materials (e.g. to the collecting points for disposal of batteries)

Preface
10
QBOX-2060 User’s Manual
Preface
 How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as
a reference for operation, troubleshooting, and upgrades.
NOTE
Driver downloads and additional information are available under
Downloads on our web site: www.quanmax.com.
 Unpacking
When unpacking, follow these steps:
1. After opening the box, save it and the packing material for possible future
shipment.
2. Remove all items from the box. If any items listed on the purchase order
are missing, notify Quanmax customer service immediately.
3. Inspect the product for damage. If there is damage, notify Quanmax
customer service immediately. Refer to “Warranty Policy” for the return
procedure.
 Regulatory Compliance Statements
This section provides the FCC compliance statement for Class A devices.
FCC Compliance Statement for Class A Devices
The product(s) described in this user’s guide has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the user’s guide, may cause harmful
interference to radio communications. Operation of this equipment in a residential