Quanmax QutePC-1000 User manual

I
QutePC-1000 User’s Manual
QutePC-1000
0.6-Liter mini-PC with Intel® Atom Processor N270
User’s Guide

II
QutePC-1000 User’s Manual
Contact Info: Quanmax Inc.
5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District, Taipei,
Taiwan 114
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2009 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any liability
arising out of the application or use of the information or products described herein. This user’s guide may
contain or reference information and products protected by copyrights or patents and does not convey any
license under the patent rights of Quanmax, nor the rights of others.
Quanmax and MAXDATA are registered trademarks of Quanmax. All trademarks, registered trademarks, and
trade names used in this user’s guide are the property of their respective owners. All rights reserved. This
user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s guide in
other publications. Customers may alter this user’s guide and publish it only after they remove the Quanmax
name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as warranted by
evolution in user needs or progress in engineering or manufacturing technology. Changes which affect the
operation of the unit will be documented in the next revision of this user’s guide.
Revision Date Edited by Changes
1.0
09/07/2009
SLee
Initial Release (MAXDATA)

Content
3
QutePC-1000 User’s Manual
Content
Content.......................................................................................................................................3
Figures & Tables .........................................................................................................................4
Safety Instructions .....................................................................................................................5
Before You Begin ................................................................................................5
When Working Inside a Computer.....................................................................5
Preventing Electrostatic Discharge ....................................................................6
Instructions for Lithium Battery.........................................................................7
Voltage Ratings...................................................................................................7
Preface .......................................................................................................................................8
How to Use This Guide.......................................................................................8
Unpacking...........................................................................................................8
Regulatory Compliance Statements...................................................................8
Warranty Policy ..................................................................................................9
Maintaining Your Computer.............................................................................10
Chapter 1 Introduction .........................................................................................................13
Overview ..........................................................................................................13
Product Specifications......................................................................................14
System tour......................................................................................................15
Chapter 2 Getting Started.....................................................................................................19
Setting up your PC............................................................................................19
Mounting your PC to a monitor .......................................................................21
Anti-theft protection with a Kensington Lock .................................................23
Computer Stand ...............................................................................................23
Chapter 3 AMI BIOS Setup ....................................................................................................25
Overview ..........................................................................................................25
Main Menu.......................................................................................................26
Advanced Menu ...............................................................................................27
Boot Menu .......................................................................................................29
Chipset Menu...................................................................................................30
Power Menu.....................................................................................................31
Security Menu..................................................................................................32
Exit Menu .........................................................................................................32
Chapter 4 Driver Installation.................................................................................................34
Chapter 5 FAQ & Troubleshooting........................................................................................35

Figures & Tables
4
QutePC-1000 User’s Manual
Figures & Tables
Figure 1 Front Panel .................................................................................................15
Figure 2 Rear Panel ..................................................................................................17
Figure 3 Connect the DVI cable................................................................................19
Figure 4 Connecting USB mouse & keyboard ..........................................................20
Figure 5 Network cable with RJ45 connector..........................................................20
Figure 6 Turing on the system .................................................................................21
Figure 7 VESA mounting (1) .....................................................................................21
Figure 8 VESA mounting (2) .....................................................................................22
Figure 9 Use a Kensington lock................................................................................23
Figure 10 Computer Stand .......................................................................................23
Table 1 QutePC-1000 product specifications...........................................................14
Table 2 BIOS Main Menu..........................................................................................26
Table 3 IDE Device Setting Menu .............................................................................26
Table 4 System Information .....................................................................................27
Table 5 Advanced Menu...........................................................................................27
Table 6 OnBoard Peripherals Configuration Settings ..............................................28
Table 7 Hardware Health Configuration...................................................................29
Table 8 Boot Menu...................................................................................................29
Table 9 Chipset Menu ..............................................................................................30
Table 10 Power Menu ..............................................................................................31
Table 11 Security Menu ...........................................................................................32
Table 12 Exit Menu...................................................................................................32

Safety Instructions
5
QutePC-1000 User’s Manual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the following
pages to prevent damage to the product and to ensure your own personal safety. Refer to
the “Advisories” section in the Preface for advisory conventions used in this user’s guide,
including the distinction between Warnings, Cautions, Important Notes, and Notes.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the interior
of a computer. The power supplies produce high voltages and energy hazards,
which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures. If you
have any questions, please contact Quanmax Post-Sales Technical Support.
Access can only be gained by service persons or by users who have been
instructed about the reasons for the restrictions applied to the location and
about any precautions that shall be taken; and access is through the use of a
tool or lock and key, or other means of security, and is controlled by authority
responsible for the location.
WARNING
High voltages are present inside the chassis when the unit’s power cord is plugged into an
electrical outlet. Turn off system power, turn off the power supply, and then disconnect the
power cord from its source before removing the chassis cover. Turning off the system power
switch does not remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or subsystems to
prevent electric shock or system board damage. This does not apply when hot

Safety Instructions
6
QutePC-1000 User’s Manual
swapping parts.
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after turning off
the computer before removing a component, removing a system board, or
disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop, not on
the cable itself. Some cables have a connector with locking tabs. If you are
disconnecting this type of cable, press in on the locking tabs before disconnecting the
cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before connecting a cable, make sure both connectors are
correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this user’s guide. Follow
installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation and follow
proper ESD procedure to reduce the risk of damage to components. Quanmax strongly
encourages you to follow proper ESD procedure, which can include wrist straps and smocks,
when servicing equipment.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not remove
the component’s antistatic packing material until you are ready to install the
component in a computer. Just before unwrapping the antistatic packaging, be sure
you are at an ESD workstation or grounded. This will discharge any static electricity
that may have built up in your body.
When transporting a sensitive component, first place it in an antistatic container or
packaging.
Handle all sensitive components at an ESD workstation. If possible, use antistatic floor
pads and workbench pads.
Handle components and boards with care. Don’t touch the components or contacts

Safety Instructions
7
QutePC-1000 User’s Manual
on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.
Instructions for Lithium Battery
WARNING
Danger of explosion when battery is replaced with incorrect type. Only replace with
the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to
the local regulations dealing with the disposal of these special materials (e.g. to the
collecting points for disposal of batteries)
Voltage Ratings
The external power adaptor of the QutePC-1000 has the following voltage ratings:
Input: 100-240 VAC, 50-60 Hz
Output: 40W, +19Vdc, 2.1A
Power Supplies:
Lite-On Technology Corp / PA-1300-014XX ( X can be A-Z, 0-9,”-“ or blank)
Delta Electronics Inc / ADP-30MH B

Preface
8
QutePC-1000 User’s Manual
Preface
How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as a
reference for operation, troubleshooting, and upgrades.
NOTE
Driver downloads and additional information are available under Downloads on our web
site: www.quanmax.com.
Unpacking
When unpacking, follow these steps:
1. After opening the box, save it and the packing material for possible future
shipment.
2. Remove all items from the box. If any items listed on the purchase order are
missing, notify Quanmax customer service immediately.
3. Inspect the product for damage. If there is damage, notify Quanmax customer
service immediately. Refer to “Warranty Policy” for the return procedure.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class B devices.
FCC Compliance Statement:
This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reason able
protection against harmful interference in residential installations. This equipment
generates, uses, and can radiate radiofrequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television equipment reception,
which can be determined by turning the equipment off and on, the user is encouraged to

Preface
9
QutePC-1000 User’s Manual
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Quanmax could void the user's
authority to operate the equipment.
NOTE
The assembler of a personal computer system may be required to test the system and/or
make necessary modifications if a system is found to cause harmful interference or to be
noncompliant with the appropriate standards for its intended use.
Warranty Policy
Limited Warranty
Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at
www.quanmax.com. Please consult your distributor for warranty verification.
The limited warranty is void if the product has been subjected to alteration, neglect,
misuse, or abuse; if any repairs have been attempted by anyone other than Quanmax or its
authorized agent; or if the failure is caused by accident, acts of God, or other causes
beyond the control of Quanmax or the manufacturer. Neglect, misuse, and abuse shall
include any installation, operation, or maintenance of the product other than in
accordance with the user’s guide.
No agent, dealer, distributor, service company, or other party is authorized to change,
modify, or extend the terms of this Limited Warranty in any manner whatsoever. Quanmax
reserves the right to make changes or improvements in any product without incurring any
obligation to similarly alter products previously purchased.
Return Procedure
For any Limited Warranty return, please contact Support at www.quanmax.com and login
to obtain a Return Material Authorization (RMA) Number. If you do not have an account,
send an email to [e-mail] to apply for one.
All product(s) returned to Quanmax for service or credit must be accompanied by a Return

Preface
10
QutePC-1000 User’s Manual
Material Authorization (RMA) Number. Freight on all returned items must be prepaid by
the customer who is responsible for any loss or damage caused by common carrier in
transit. Returns for Warranty must include a Failure Report for each unit, by serial
number(s), as well as a copy of the original invoice showing the date of purchase.
To reduce risk of damage, returns of product must be in a Quanmax shipping container. If
the original container has been lost or damaged, new shipping containers may be obtained
from Quanmax Customer Service at a nominal cost.
Quanmax owns all parts removed from repaired products. Quanmax uses new and
reconditioned parts made by various manufacturers in performing warranty repairs and
building replacement products. If Quanmax repairs or replaces a product, its warranty term
is not extended.
Shipments not in compliance with this Limited Warranty Return Policy will not be accepted
by Quanmax.
Limitation of Liability
In no event shall Quanmax be liable for any defect in hardware, software, loss, or
inadequacy of data of any kind, or for any direct, indirect, incidental, or consequential
damages in connection with or arising out of the performance or use of any product
furnished hereunder. Quanmax’s liability shall in no event exceed the purchase price of the
product purchased hereunder. The foregoing limitation of liability shall be equally
applicable to any service provided by Quanmax or its authorized agent.
Maintaining Your Computer
Environmental Factors
Temperature
The ambient temperature within an enclosure may be greater than room ambient
temperature. Installation in an enclosure should be such that the amount of air flow
required for safe operation is not compromised. Consideration should be given to the
maximum rated ambient temperature. Overheating can cause a variety of problems,
including premature aging and failure of chips or mechanical failure of devices.
If the system has been exposed to abnormally cold temperatures, allow a two-hour
warm-up period to bring it up to normal operating temperature before turning it on.
Failure to do so may cause damage to internal components, particularly the hard disk
drive.
Humidity
High-humidity can cause moisture to enter and accumulate in the system. This

Preface
11
QutePC-1000 User’s Manual
moisture can cause corrosion of internal components and degrade such properties as
electrical resistance and thermal conductivity. Extreme moisture buildup inside the
system can result in electrical shorts, which can cause serious damage to the system.
Buildings in which climate is controlled usually maintain an acceptable level of
humidity for system equipment. However, if a system is located in an unusually humid
location, a dehumidifier can be used to maintain the humidity within an acceptable
range. Refer to the “Specifications” section of this user’s guide for the operating and
storage humidity specifications.
Altitude
Operating a system at a high altitude (low pressure) reduces the efficiency of the
cooling fans to cool the system. This can cause electrical problems related to arcing
and corona effects. This condition can also cause sealed components with internal
pressure, such as electrolytic capacitors, to fail or perform at reduced efficiency.
Power Protection
The greatest threats to a system’s supply of power are power loss, power spikes, and
power surges caused by electrical storms, which interrupt system operation and/or
damage system components. To protect your system, always properly ground power cables
and one of the following devices.
Surge Protector
Surge protectors are available in a variety of types and usually provide a level of
protection proportional with the cost of the device. Surge protectors prevent voltage
spikes from entering a system through the AC power cord. Surge protectors, however,
do not offer protection against brownouts, which occur when the voltage drops more
than 20 percent below the normal AC line voltage level.
Line Conditioner
Line conditioners go beyond the overvoltage protection of surge protectors. Line
conditioners keep a system’s AC power source voltage at a fairly constant level and,
therefore, can handle brownouts. Because of this added protection, line conditioners
cost more than surge protectors. However, line conditioners cannot protect against a
complete loss of power.
Uninterruptible Power Supply
Uninterruptible power supply (UPS) systems offer the most complete protection
against variations on power because they use battery power to keep the server

Preface
12
QutePC-1000 User’s Manual
running when AC power is lost. The battery is charged by the AC power while it is
available, so when AC power is lost, the battery can provide power to the system for a
limited amount of time, depending on the UPS system.
UPS systems range in price from a few hundred dollars to several thousand dollars,
with the more expensive unit s allowing you to run larger systems for a longer period
of time when AC power is lost. UPS systems that provide only 5 minutes of battery
power let you conduct an orderly shutdown of the system, but are not intended to
provide continued operation. Surge protectors should be used with all UPS systems,
and the UPS system should be Underwriters Laboratories (UL) safety approved.

Chapter 1
13
QutePC-1000 User’s Manual
Chapter 1
Introduction
Overview
The QutePC-1000 is a mini PC with a volume of just 0.6-liter that is ideal for space critical
applications. This system is designed with Intel® Atom N270 Processor which provides with
excellent performance enabled by next- generation 45nm Process Technology. The system
is supported with Intel® 945GSE / ICH7-M chipset, and DDR2 SO-DIMM up to 2GB.
Featured are a 2.5” SATA hard drive bay, eSATA, Audio out, MIC in, GbE, USB 2.0 and DVI-I.
Checklist
QutePC-1000
Power Adapter
Power Cord
Desktop Stand
Driver CD
Quick installation Guide
Optional VESA Mounting Kit (with 4x M4X6 flat head screws)
Features
Ultra Quiet, Ultra Small, Ultra-Low Power
Intel® Atom Processor N270
Intel® 945GSE + ICH7-M
Support DDR2 533 SODIMM up to 2GB
Support 1x DVI-I, 1x GbE, 1x 2.5” SATA HDD, 1x eSATA, 4x USB and Audio

Chapter 1
14
QutePC-1000 User’s Manual
Product Specifications
Dimensions (WxHxD),
3.90 x 13.00 x 11.50 cm (1.54 x 5.12 x 4.53 inches)
Weight 650 g
CPU/ Chipset Intel® Atom N270 Processor , 945GSE / ICH7-M
RAM 1 x DDR2 533 SO-DIMM up to 2GB
Storage 1 x 2.5” SATA HDD
Front IO
1x Line-Out, 1x MIC-In
1x Push button for power on/off
1x Push button for reset
1x POWER LED
1x HDD LED
1x Wifi LED
2x USB2.0
1x eSATA connector
Rear IO
1x DC JACK
1x DVI-I connector for CRT & DVI output
2x USB2.0
1x RJ-45, GbE port
Wireless LAN Optional Mini PCIe WI-FI Card
Cooling System Fan
Power Unit Input: 100-240 VAC, 50-60 Hz
Output: 40W, +19Vdc, 2.1A
Mounting Desktop, VESA-mount
Certifications CE, FCC Class B
Table 1 QutePC-1000 product specifications

Chapter 1
15
QutePC-1000 User’s Manual
System tour
Refer to the diagrams below to identify the components of the system.
Front Panel
Figure 1 Front Panel
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives. USB allows many devices to run
simultaneously on a single computer, with some peripheral acting as additional
plug-in sites or hubs.
WiFi LED
When the data is transferring, the WiFi LED will blink.
eSATA
The eSATA connector provides an external connectivity for mass storage devices.

Chapter 1
16
QutePC-1000 User’s Manual
CAUTION
This connector do not support hot-swapping. Users should not connect or
disconnect their eSATA devices from PC when the system is working.
MIC-IN
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
Headphone Jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal
to amplified speakers or headphones.
Power LED
The power LED will light when the PC is power-on.
HDD LED
The hard disk LED blinks when data is being written into or read from the HDD.
Reset Button
To reset the computer, use the tip of a pen to press the Reset button briefly (for less
than three seconds).
Power Switch
The power switch allows powering ON and OFF the system.

Chapter 1
17
QutePC-1000 User’s Manual
Rear Panel
Figure 2 Rear Panel
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives. USB allows many devices to run
simultaneously on a single computer, with some peripheral acting as additional
plug-in sites or hubs.
DVI Port
The Digital Visual Interface (DVI-I) port supports a high quality VGA-compatible device
such as a monitor or LCD TV to allow viewing on a larger external display.
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.

Chapter 1
18
QutePC-1000 User’s Manual
DC Jack
The supplied power adapter converts AC power to DC for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC,
always use the supplied power adapter.
Kensington Lock Slot
The slot is used for attaching a lock-and-cable apparatus. Locks are generally secured
in place with a key or combination lock attached to a rubberized metal cable.

Chapter 2
19
QutePC-1000 User’s Manual
Chapter 2
Getting Started
Setting up your PC
Connecting the monitor
Connect the DVI cable from your display to the DVI port.
Figure 3 Connect the DVI cable
NOTE
To connect a VGA display, you need the DVI to VGA adapter to connect a display
with a VGA connector.
NOTE
When the system reboots without connecting the DVI, there might be no image
on screen when you insert the DVI cable. Please pressing <Ctrl>+<Alt>+<F4>
simultaneously to show the image on screen.

Chapter 2
20
QutePC-1000 User’s Manual
Connecting USB mouse & keyboard
Your QutePC-1000 does not come with a keyboard and mouse, but you can use any USB
keyboard or mouse with your computer.
Figure 4 Connecting USB mouse & keyboard
NOTE
Using a third-party USB mouse or keyboard may require software drivers. Check the
manufacturer’s website for the latest software drivers.
Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the
other end to a hub or switch.
Figure 5 Network cable with RJ45 connector