Quanmax QutePC-2000 User manual

I
Q
uteP
C
‐2000User’sManual
QutePC-2000
Fan-less Mini-PC with Intel® Atom Processor N270
User’s Guide

II
Q
uteP
C
‐2000User’sManual
Contact Info: Quanmax Inc.
5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District,
Taipei, Taiwan 114
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2009 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others.
Quanmax and MAXDATA are registered trademarks of Quanmax. All trademarks, registered
trademarks, and trade names used in this user’s guide are the property of their respective owners. All
rights reserved. This user’s guide contains information proprietary to Quanmax. Customers may reprint
and use this user’s guide in other publications. Customers may alter this user’s guide and publish it
only after they remove the Quanmax name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this user’s
guide.
Revision Date Edited by Changes
1.0 2009/12/10 SLee Initial Release
1.1 2010/07/12 Zack Update Op. Temperature

Content
3
Q
uteP
C
‐2000User’sManual
Content
Content....................................................................................................................... 3
Figures & Tables......................................................................................................... 4
Safety Instructions...................................................................................................... 5
Before You Begin .................................................................................. 5
When Working Inside a Computer ........................................................ 5
Preventing Electrostatic Discharge ....................................................... 6
Instructions for Lithium Battery ............................................................. 7
Voltage Ratings..................................................................................... 7
Preface....................................................................................................................... 8
How to Use This Guide ......................................................................... 8
Unpacking............................................................................................. 8
Regulatory Compliance Statements...................................................... 8
Warranty Policy..................................................................................... 9
Maintaining Your Computer................................................................. 10
Chapter 1 Introduction ........................................................................................... 13
Overview............................................................................................. 13
Product Specifications ........................................................................ 14
System tour......................................................................................... 15
Chapter 2 Getting Started ...................................................................................... 19
Setting up your PC.............................................................................. 19
Mounting your PC to a monitor ........................................................... 21
Anti-theft protection with a Kensington Lock ....................................... 22
Chapter 3 AMI BIOS Setup.................................................................................... 23
Overview............................................................................................. 23
Main Menu .......................................................................................... 24
Advanced Menu.................................................................................. 25
Boot Menu .......................................................................................... 27
Chipset Menu...................................................................................... 28
Power Menu........................................................................................ 29
Security Menu..................................................................................... 30
Exit Menu............................................................................................ 30
Chapter 4 Driver Installation .................................................................................. 32
Chapter 5 FAQ & Troubleshooting......................................................................... 33

Figures & Tables
4
Q
uteP
C
‐2000User’sManual
Figures & Tables
Figure 1 QutePC-2000 dimensions drawing .............................................. 14
Figure 2 Front Panel .................................................................................. 15
Figure 3 Rear Panel................................................................................... 17
Figure 4 Connect the DVI cable ................................................................. 19
Figure 5 Connecting USB mouse & keyboard............................................ 20
Figure 6 Network cable with RJ45 connector............................................. 20
Figure 7 Turing on the system ................................................................... 21
Figure 8 VESA mounting............................................................................ 21
Figure 9 VESA Mounting Kit Dimension..................................................... 22
Figure 10 Use a Kensington lock ............................................................... 22
Table 1 QutePC-2000 product specifications ............................................. 14
Table 2 BIOS Main Menu ........................................................................... 24
Table 3 IDE Device Setting Menu .............................................................. 24
Table 4 System Information........................................................................ 25
Table 5 Advanced Menu............................................................................. 25
Table 6 OnBoard Peripherals Configuration Settings ................................ 26
Table 7 Hardware Health Configuration ..................................................... 27
Table 8 Boot Menu ..................................................................................... 27
Table 9 Chipset Menu ................................................................................ 28
Table 10 Power Menu ................................................................................ 29
Table 11 Security Menu.............................................................................. 30
Table 12 Exit Menu .................................................................................... 30

Safety Instructions
5
Q
uteP
C
‐2000User’sManual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
Access can only be gained by service persons or by users who have
been instructed about the reasons for the restrictions applied to the
location and about any precautions that shall be taken; and access is
through the use of a tool or lock and key, or other means of security,
and is controlled by authority responsible for the location.
WARNING
High voltages are present inside the chassis when the unit’s power cord is plugged into
an electrical outlet. Turn off system power, turn off the power supply, and then
disconnect the power cord from its source before removing the chassis cover. Turning off
the system power switch does not remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.

Safety Instructions
6
Q
uteP
C
‐2000User’sManual
2. Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable. As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins. Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this user’s guide.
Follow installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.
When transporting a sensitive component, first place it in an antistatic container
or packaging.

Safety Instructions
7
Q
uteP
C
‐2000User’sManual
Handle all sensitive components at an ESD workstation. If possible, use
antistatic floor pads and workbench pads.
Handle components and boards with care. Don’t touch the components or
contacts on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.
Instructions for Lithium Battery
WARNING
Danger of explosion when battery is replaced with incorrect type. Only replace
with the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery
according to the local regulations dealing with the disposal of these special
materials (e.g. to the collecting points for disposal of batteries)
Voltage Ratings
The external power adaptor of the QutePC-2000 has the following voltage ratings:
Input: 100-240 VAC, 50-60 Hz
Output: 30W, 12-19Vdc, 2.5-1.58A
Power Supplies:
Touch Electronic Co Ltd / SA06-30S12R-W
Lite-On Technology Corp / PA-1300-04

Preface
8
Q
uteP
C
‐2000User’sManual
Preface
How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as
a reference for operation, troubleshooting, and upgrades.
NOTE
Driver downloads and additional information are available under Downloads on
our web site: www.quanmax.com.
Unpacking
When unpacking, follow these steps:
1. After opening the box, save it and the packing material for possible future
shipment.
2. Remove all items from the box. If any items listed on the purchase order
are missing, notify Quanmax customer service immediately.
3. Inspect the product for damage. If there is damage, notify Quanmax
customer service immediately. Refer to “Warranty Policy” for the return
procedure.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class B devices.
FCC Compliance Statement:
This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reason able protection against harmful interference in residential installations. This
equipment generates, uses, and can radiate radiofrequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause

Preface
9
Q
uteP
C
‐2000User’sManual
interference to radio or television equipment reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Quanmax could void the user's
authority to operate the equipment.
NOTE
The assembler of a personal computer system may be required to test the system
and/or make necessary modifications if a system is found to cause harmful
interference or to be noncompliant with the appropriate standards for its intended use.
Warranty Policy
Limited Warranty
Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at
www.quanmax.com. Please consult your distributor for warranty verification.
The limited warranty is void if the product has been subjected to alteration, neglect,
misuse, or abuse; if any repairs have been attempted by anyone other than
Quanmax or its authorized agent; or if the failure is caused by accident, acts of God,
or other causes beyond the control of Quanmax or the manufacturer. Neglect,
misuse, and abuse shall include any installation, operation, or maintenance of the
product other than in accordance with the user’s guide.
No agent, dealer, distributor, service company, or other party is authorized to change,
modify, or extend the terms of this Limited Warranty in any manner whatsoever.
Quanmax reserves the right to make changes or improvements in any product
without incurring any obligation to similarly alter products previously purchased.
Return Procedure
For any Limited Warranty return, please contact Support at www.quanmax.com and
login to obtain a Return Material Authorization (RMA) Number. If you do not have an

Preface
10
Q
uteP
C
‐2000User’sManual
account, send an email to [email protected] to apply for one.
All product(s) returned to Quanmax for service or credit must be accompanied by a
Return Material Authorization (RMA) Number. Freight on all returned items must be
prepaid by the customer who is responsible for any loss or damage caused by
common carrier in transit. Returns for Warranty must include a Failure Report for
each unit, by serial number(s), as well as a copy of the original invoice showing the
date of purchase.
To reduce risk of damage, returns of product must be in a Quanmax shipping
container. If the original container has been lost or damaged, new shipping
containers may be obtained from Quanmax Customer Service at a nominal cost.
Quanmax owns all parts removed from repaired products. Quanmax uses new and
reconditioned parts made by various manufacturers in performing warranty repairs
and building replacement products. If Quanmax repairs or replaces a product, its
warranty term is not extended.
Shipments not in compliance with this Limited Warranty Return Policy will not be
accepted by Quanmax.
Limitation of Liability
In no event shall Quanmax be liable for any defect in hardware, software, loss, or
inadequacy of data of any kind, or for any direct, indirect, incidental, or
consequential damages in connection with or arising out of the performance or use
of any product furnished hereunder. Quanmax’s liability shall in no event exceed the
purchase price of the product purchased hereunder. The foregoing limitation of
liability shall be equally applicable to any service provided by Quanmax or its
authorized agent.
Maintaining Your Computer
Environmental Factors
Temperature
The ambient temperature within an enclosure may be greater than room
ambient temperature. Installation in an enclosure should be such that the
amount of air flow required for safe operation is not compromised.
Consideration should be given to the maximum rated ambient temperature.
Overheating can cause a variety of problems, including premature aging and
failure of chips or mechanical failure of devices.
If the system has been exposed to abnormally cold temperatures, allow a
two-hour warm-up period to bring it up to normal operating temperature before

Preface
11
Q
uteP
C
‐2000User’sManual
turning it on. Failure to do so may cause damage to internal components,
particularly the hard disk drive.
Humidity
High-humidity can cause moisture to enter and accumulate in the system. This
moisture can cause corrosion of internal components and degrade such
properties as electrical resistance and thermal conductivity. Extreme moisture
buildup inside the system can result in electrical shorts, which can cause
serious damage to the system.
Buildings in which climate is controlled usually maintain an acceptable level of
humidity for system equipment. However, if a system is located in an unusually
humid location, a dehumidifier can be used to maintain the humidity within an
acceptable range. Refer to the “Specifications” section of this user’s guide for
the operating and storage humidity specifications.
Altitude
Operating a system at a high altitude (low pressure) reduces the efficiency of
the cooling fans to cool the system. This can cause electrical problems related
to arcing and corona effects. This condition can also cause sealed components
with internal pressure, such as electrolytic capacitors, to fail or perform at
reduced efficiency.
Power Protection
The greatest threats to a system’s supply of power are power loss, power spikes,
and power surges caused by electrical storms, which interrupt system operation
and/or damage system components. To protect your system, always properly
ground power cables and one of the following devices.
Surge Protector
Surge protectors are available in a variety of types and usually provide a level
of protection proportional with the cost of the device. Surge protectors prevent
voltage spikes from entering a system through the AC power cord. Surge
protectors, however, do not offer protection against brownouts, which occur
when the voltage drops more than 20 percent below the normal AC line voltage
level.
Line Conditioner
Line conditioners go beyond the overvoltage protection of surge protectors.

Preface
12
Q
uteP
C
‐2000User’sManual
Line conditioners keep a system’s AC power source voltage at a fairly constant
level and, therefore, can handle brownouts. Because of this added protection,
line conditioners cost more than surge protectors. However, line conditioners
cannot protect against a complete loss of power.
Uninterruptible Power Supply
Uninterruptible power supply (UPS) systems offer the most complete protection
against variations on power because they use battery power to keep the server
running when AC power is lost. The battery is charged by the AC power while it
is available, so when AC power is lost, the battery can provide power to the
system for a limited amount of time, depending on the UPS system.
UPS systems range in price from a few hundred dollars to several thousand
dollars, with the more expensive unit s allowing you to run larger systems for a
longer period of time when AC power is lost. UPS systems that provide only 5
minutes of battery power let you conduct an orderly shutdown of the system,
but are not intended to provide continued operation. Surge protectors should be
used with all UPS systems, and the UPS system should be Underwriters
Laboratories (UL) safety approved.

Chapter 1
13
Q
uteP
C
‐2000User’sManual
Chapter 1
Introduction
Overview
The QutePC-2000 is a mini PC is ideal for space critical applications. This system is
designed with Intel® Atom N270 Processor which provides with excellent
performance enabled by next- generation 45nm Process Technology. The system is
supported with Intel® 945GSE / ICH7-M chipset, and DDR2 SO-DIMM up to 2GB.
Featured are a 2.5” SATA hard drive bay, eSATA, Audio out, MIC in, GbE, USB 2.0
and DVI-I.
Checklist
QutePC-2000
Power Adapter
Power Cord
Driver CD
Quick installation Guide
Optional VESA Mounting Kit (with4xM4X8flatheadscrews)
Optional wireless LAN antennas
Features
Ultra Quiet, Ultra Small, Ultra-Low Power
Intel® Atom Processor N270
Intel® 945GSE + ICH7-M
Support DDR2 533 SODIMM up to 2GB
Support 1x DVI-I, 1x GbE, 1x 2.5” SATA HDD, 1x eSATA, 4x USB and Audio

Chapter 1
14
Q
uteP
C
‐2000User’sManual
Product Specifications
Dimensions 170 x 47x 110 mm (WxHxD)
Weight 1.2 kg
CPU/ Chipset Intel® Atom N270 Processor , 945GSE / ICH7-M
RAM 1 x DDR2 533 SO-DIMM up to 2GB
Storage 1 x 2.5” SATA HDD
Front IO
1x Line-Out, 1x MIC-In
1x Push button for power on/off
1x Push button for reset
1x POWER LED
1x HDD LED
1x Wifi LED
2x USB2.0
1x eSATA connector
Rear IO
1x DC JACK
1x DVI-I connector for CRT or DVI output
2x USB2.0
1x RJ-45, GbE port
Wireless LAN Optional Mini PCIe WI-FI Card
Cooling Fanless
Power Unit Input: 100-240 VAC, 50-60 Hz
Output: 30W, 12-19Vdc, 2.5-1.58A
Operating Temp. 0~40 C
Mounting Desktop, VESA-mount
Certifications CE, FCC Class B
Table 1 QutePC-2000 product specifications
Figure 1 QutePC-2000 dimensions drawing

Chapter 1
15
Q
uteP
C
‐2000User’sManual
System tour
Refer to the diagrams below to identify the components of the system.
Front Panel
Figure 2 Front Panel
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral
acting as additional plug-in sites or hubs.
WiFi LED
When the data is transferring, the WiFi LED will blink.
eSATA
The eSATA connector provides an external connectivity for mass storage
devices.
CAUTION
This connector do not support hot-swapping. Users should not connect or
disconnect their eSATA devices from PC when the system is working.

Chapter 1
16
Q
uteP
C
‐2000User’sManual
MIC-IN
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
Headphone Jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio out
signal to amplified speakers or headphones.
Power LED
The power LED will light when the PC is power-on.
HDD LED
The hard disk LED blinks when data is being written into or read from the HDD.
Reset Button
To reset the computer, use the tip of a pen to press the Reset button briefly (for
less than three seconds).
Power Switch
The power switch allows powering ON and OFF the system.

Chapter 1
17
Q
uteP
C
‐2000User’sManual
Rear Panel
Figure 3 Rear Panel
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral
acting as additional plug-in sites or hubs.
DVI Port
The Digital Visual Interface (DVI-I) port supports a high quality VGA-compatible
device such as a monitor or LCD TV to allow viewing on a larger external
display.
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for
connection to a local network.
DC Jack
The supplied power adapter converts AC power to DC for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage
to the PC, always use the supplied power adapter.

Chapter 1
18
Q
uteP
C
‐2000User’sManual
Kensington Lock Slot
The slot is used for attaching a lock-and-cable apparatus. Locks are generally
secured in place with a key or combination lock attached to a rubberized metal
cable.

Chapter 2
19
Q
uteP
C
‐2000User’sManual
Chapter 2
Getting Started
Setting up your PC
Connecting the monitor
Connect the DVI cable from your display to the DVI port.
Figure 4 Connect the DVI cable
NOTE
To connect a VGA display, you need the DVI to VGA adapter to connect a
display with a VGA connector.
NOTE
When the system reboots without connecting the DVI, there might be no
image on screen when you insert the DVI cable. Please
pressing <Ctrl>+<Alt>+<F4> simultaneously to show the image on screen.

Chapter 2
20
Q
uteP
C
‐2000User’sManual
Connecting USB mouse & keyboard
Your QutePC-2000 does not come with a keyboard and mouse, but you can use any
USB keyboard or mouse with your computer.
Figure 5 Connecting USB mouse & keyboard
NOTE
Using a third-party USB mouse or keyboard may require software drivers.
Check the manufacturer’s website for the latest software drivers.
Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a hub or switch.
Figure 6 Network cable with RJ45 connector