Quanmax KPC-2150 Series User manual

I
KPC-2150 Series User’s Manual
KPC-2150 Series
21.5” Fanless Panel PC
with Intel®Celeron®J1900 Processors
User’s Guide

II
KPC-2150 Series User’s Manual
Contact Info: Quanmax Inc.
4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District,
Taipei 114Taiwan
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2015 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others.
Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade
names used in this user’s guide are the property of their respective owners. All rights reserved. This
user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s
guide in other publications. Customers may alter this user’s guide and publish it only after they remove
the Quanmax name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this user’s
guide.

Content
3
KPC-2150 Series User’s Manual
Content
Content.......................................................................................................................3
Figures.......................................................................................................................4
Tables.........................................................................................................................5
Safety Instructions......................................................................................................6
Before You Begin.........................................................................................6
When Working Inside a Computer...............................................................6
Preventing Electrostatic Discharge..............................................................7
Preface.......................................................................................................................9
How to Use This Guide................................................................................9
Unpacking ...................................................................................................9
Regulatory Compliance Statements............................................................9
Warranty Policy .........................................................................................10
Maintaining Your Computer....................................................................... 11
Chapter 1 Introduction...........................................................................................14
Overview ...................................................................................................14
Product Specifications...............................................................................15
System tour...............................................................................................16
Mechanical Dimensions....................................................................................18
Chapter 2 Getting Started......................................................................................19
Setting up your PC ....................................................................................19
VESA Mounting .........................................................................................23
Panel Mounting..........................................................................................24
Chapter 3AMI BIOS Setup ......................................................................................26
Overview ...................................................................................................26
Main Menu.................................................................................................27
Advanced Menu.........................................................................................28
Security Menu............................................................................................37
Boot Menu.................................................................................................38
Save & Exit Menu......................................................................................39
Chapter 4 Driver Installation..................................................................................40

Figures
4
KPC-2150 Series User’s Manual
Figures
Figure 1 I/Os..............................................................................................16
Figure 2 Mechanical Dimensions...............................................................18
Figure 3 VGA / HDMI.................................................................................19
Figure 4 Connect USB mouse & keyboard................................................20
Figure 5 RJ45 connector............................................................................20
Figure 6 COM port.....................................................................................21
Figure 7 Turning on the system .................................................................22
Figure 8 VESAMounting Hole Locations...................................................23
Figure 9 Panel Mount Cut-out hole and maximum panel thickness...........24
Figure 10 Panel Mounting..........................................................................25

Tables
5
KPC-2150 Series User’s Manual
Tables
Table 1 KPC-2150 product specifications ..................................................15
Table 2 KPC-2150 BIOS Main Menu..........................................................27
Table 3 Advanced Menu.............................................................................28
Table 4 Advanced Menu – Display Configuration.......................................29
Table 5 Advanced Menu – Super IO Configuration....................................30
Table 6Advanced Menu – Super IO Configuration – Serial Port 1
Configuration ......................................................................................30
Table 7Advanced Menu – Super IO Configuration – Serial Port 2
Configuration ......................................................................................31
Table 8Advanced Menu –CPU Chipset Configuration...............................32
Table 9 Advanced Menu –SATA Configuration...........................................33
Table 10 Advanced Menu –USB Configuration.......................................... 34
Table 11 Advanced Menu – H/W Monitor...................................................35
Table 12 Power Menu................................................................................36
Table 13 Security Menu .............................................................................37
Table 14 Boot Menu...................................................................................38
Table 15 Save & Exit Menu........................................................................39

Safety Instructions
6
KPC-2150 Series User’s Manual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
WARNING
High voltages are present inside the chassis when the unit’s power cord is
plugged into an electrical outlet. Turn off system power, turn off the power
supply, and then disconnect the power cord from its source before
removing the chassis cover. Turning off the system power switch does not
remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.

Safety Instructions
7
KPC-2150 Series User’s Manual
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable. As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins.Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this
user’s guide. Follow installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.

Safety Instructions
8
KPC-2150 Series User’s Manual
When transporting a sensitive component, first place it in an antistatic container
or packaging.
Handle all sensitive components at an ESD workstation. If possible, use
antistatic floor pads and workbench pads.
Handle components and boards with care. Don’t touch the components or
contacts on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.

Preface
9
KPC-2150 Series User’s Manual
Preface
How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as
a reference for operation, troubleshooting, and upgrades.
NOTE
Driver downloads and additional information are available under
Downloads on our web site: www.quanmax.com.
Unpacking
When unpacking, follow these steps:
1. After opening the box, save it and the packing material for possible future
shipment.
2. Remove all items from the box. If any items listed on the purchase order
are missing, notify Quanmax customer service immediately.
3. Inspect the product for damage. If there is damage, notify Quanmax
customer service immediately. Refer to “Warranty Policy” for the return
procedure.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class A devices.
FCC Compliance Statement for Class A Devices
The product(s) described in this user’s guide has been tested and found to comply
with the limits for a ClassA digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the user’s guide, may cause harmful
interference to radio communications. Operation of this equipment in a residential

Preface
10
KPC-2150 Series User’s Manual
area (domestic environment) is likely to cause harmful interference, in which case
the user will be required to correct the interference (take adequate measures) at
their own expense.
Changes or modifications not expressly approved by Quanmax could void the user's
authority to operate the equipment.
NOTE
The assembler of a personal computer system may be required to test
the system and/or make necessary modifications if a system is found to
cause harmful interference or to be noncompliant with the appropriate
standards for its intended use.
Warranty Policy
Limited Warranty
Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at
www.quanmax.com. Please consult your distributor for warranty verification.
The limited warranty is void if the product has been subjected to alteration, neglect,
misuse, or abuse; if any repairs have been attempted by anyone other than
Quanmax or its authorized agent; or if the failure is caused by accident, acts of God,
or other causes beyond the control of Quanmax or the manufacturer. Neglect,
misuse, and abuse shall include any installation, operation, or maintenance of the
product other than in accordance with the user’s guide.
No agent, dealer, distributor, service company, or other party is authorized to change,
modify, or extend the terms of this Limited Warranty in any manner whatsoever.
Quanmax reserves the right to make changes or improvements in any product
without incurring any obligation to similarly alter products previously purchased.
Return Procedure
For any Limited Warranty return, please contact Support at www.quanmax.com and
login to obtain a Return Material Authorization (RMA) Number. If you do not have an
account, send an email to [e-mail] to apply for one.
All product(s) returned to Quanmax for service or credit must be accompanied by a
Return Material Authorization (RMA) Number. Freight on all returned items must be
prepaid by the customer who is responsible for any loss or damage caused by
common carrier in transit. Returns for Warranty must include a Failure Report for
each unit, by serial number(s), as well as a copy of the original invoice showing the

Preface
11
KPC-2150 Series User’s Manual
date of purchase.
To reduce risk of damage, returns of product must be in a Quanmax shipping
container. If the original container has been lost or damaged, new shipping
containers may be obtained from Quanmax Customer Service at a nominal cost.
Quanmax owns all parts removed from repaired products. Quanmax uses new and
reconditioned parts made by various manufacturers in performing warranty repairs
and building replacement products. If Quanmax repairs or replaces a product, its
warranty term is not extended.
Shipments not in compliance with this Limited Warranty Return Policy will not be
accepted by Quanmax.
Limitation of Liability
In no event shall Quanmax be liable for any defect in hardware, software, loss, or
inadequacy of data of any kind, or for any direct, indirect, incidental, or
consequential damages in connection with or arising out of the performance or use
of any product furnished hereunder. Quanmax’s liability shall in no event exceed the
purchase price of the product purchased hereunder. The foregoing limitation of
liability shall be equally applicable to any service provided by Quanmax or its
authorized agent.
Maintaining Your Computer
Environmental Factors
Temperature
The ambient temperature within an enclosure may be greater than room
ambient temperature. Installation in an enclosure should be such that the
amount of air flow required for safe operation is not compromised.
Consideration should be given to the maximum rated ambient temperature.
Overheating can cause a variety of problems, including premature aging and
failure of chips or mechanical failure of devices.
If the system has been exposed to abnormally cold temperatures, allow a
two-hour warm-up period to bring it up to normal operating temperature before
turning it on. Failure to do so may cause damage to internal components,
particularly the hard disk drive.
Humidity
High-humidity can cause moisture to enter and accumulate in the system. This
moisture can cause corrosion of internal components and degrade such

Preface
12
KPC-2150 Series User’s Manual
properties as electrical resistance and thermal conductivity. Extreme moisture
buildup inside the system can result in electrical shorts, which can cause
serious damage to the system.
Buildings in which climate is controlled usually maintain an acceptable level of
humidity for system equipment. However, if a system is located in an unusually
humid location, a dehumidifier can be used to maintain the humidity within an
acceptable range. Refer to the “Specifications” section of this user’s guide for
the operating and storage humidity specifications.
Altitude
Operating a system at a high altitude (low pressure) reduces the efficiency of
the cooling fans to cool the system. This can cause electrical problems related
to arcing and corona effects. This condition can also cause sealed components
with internal pressure, such as electrolytic capacitors, to fail or perform at
reduced efficiency.
Power Protection
The greatest threats to a system’s supply of power are power loss, power spikes,
and power surges caused by electrical storms, which interrupt system operation
and/or damage system components. To protect your system, always properly
ground power cables and one of the following devices.
Surge Protector
Surge protectors are available in a variety of types and usually provide a level
of protection proportional with the cost of the device. Surge protectors prevent
voltage spikes from entering a system through the AC power cord. Surge
protectors, however, do not offer protection against brownouts, which occur
when the voltage drops more than 20 percent below the normalAC line voltage
level.
Line Conditioner
Line conditioners go beyond the over voltage protection of surge protectors.
Line conditioners keep a system’s AC power source voltage at a fairly constant
level and, therefore, can handle brownouts. Because of this added protection,
line conditioners cost more than surge protectors. However, line conditioners
cannot protect against a complete loss of power.

Preface
13
KPC-2150 Series User’s Manual
Uninterruptible Power Supply
Uninterruptible power supply (UPS) systems offer the most complete protection
against variations on power because they use battery power to keep the server
running when AC power is lost. The battery is charged by the AC power while it
is available, so when AC power is lost, the battery can provide power to the
system for a limited amount of time, depending on the UPS system.
UPS systems range in price from a few hundred dollars to several thousand
dollars, with the more expensive unit s allowing you to run larger systems for a
longer period of time when AC power is lost. UPS systems that provide only 5
minutes of battery power let you conduct an orderly shutdown of the system,
but are not intended to provide continued operation. Surge protectors should be
used with all UPS systems, and the UPS system should be Underwriters
Laboratories (UL) safety approved.

Chapter 1
14
KPC-2150 Series User’s Manual
Chapter 1
Introduction
Overview
The KPC-2150 is a 21.5" Panel PC combining the Intel® Celeron® J1900 Processor
for a wide range of industrial applications. Storage includes a mSATA solid-state
drive (SSD). Supported interfaces include 2x GbE LAN, 2x COM port, 1x USB .3.0,
4x USB 2.0 ports, 1x HDMI, 1x VGA thus easily meeting a broad range of customer
requirements. The KPC-2150 provides a compact, high-performance
human-machine interface for automation demands.
Checklist
KPC-2150
Power Adapter
Power Cord
Driver CD
Quick installation Guide
Optional VESA Mounting Kit
Optional wireless LAN
Features
21.1” LCD Display with 1920 x 1080 resolution
Intel® Celeron® J1900 Processor
Intel® HD Graphics
IP65 approved front bezel
2x GbE, 2x COMs, 4x USB 2.0, 1x USB 3.0, 1x Mini-PCIe slot
HDMI, VGA, HD Audio
Optional Wireless LAN
Fanless design

Chapter 1
15
KPC-2150 Series User’s Manual
Product Specifications
CPU Support Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)
Memory 1x DDR3L SO-DIMM 4GB
BIOS AMI Plug & Play SPI BIOS
Graphic Intel® HD Graphics
Touch Sensor 5-wire resistive touch sensor
LCD Display
Size: 21.5 inch, 16:9
Resolution: 1ĺijı xIJıĹı
Backlight: LED
Contrast Ratio: 5000:1 (typical)
Brightness: 250cd/m2 (typical)
External Display 1x HDMI
1x VGA
LAN 2 x Gigabit Ethernet port
PXE/WOL supported
Audio 3x Audio Jack for Line-In, Line-Out and Mic-In
Storage 64GB MLC SSD (mSATA)
USB 4x USB 2.0 , 1x USB 3.0
COM 2x COM port with RS-232/422/485 selection supported
Expansion slot 1x Mini-PCIe slot
Hardware Monitor Operating voltage, CPU temperature
Watchdog Timer 1-255 step, can be set with software on Super I/O
Power AC 100~240V, 12V/5A, 60W
OS Support Windows 7, Windows 8, Linux
Dimensions 542.6 x 339.2 x 64.5 mm (WxDxH)
Environment OperatingTemperature:0°C~50°C
Storage Temperature: -20°C ~ 60°C
Humidity: 10% ~ 80%, non-condensing
Certification CE, FCC Class A
Table 1 KPC-2150 product specifications

Chapter 1
16
KPC-2150 Series User’s Manual
System tour
Refer to the diagrams below to identify the components of the system.
I/Os
Figure 1 I/Os
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral
acting as additional plug-in sites or hubs.
Power Switch
The power switch allows powering ON and OFF the system.
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for
connection to a local network.
Power Input
1. Connect the supplied AC power cord to the system AC power inlet on the I/O
panel of the system.
2. Connect the other end of the AC power cord to a corresponding outlet.
HDMI
HDMI connector for display output
COM
D-Sub 9 pin connector for RS-232/422/485 connection
VGAD-Sub 15 pin VGA connector for display output

Chapter 1
17
KPC-2150 Series User’s Manual
Line-Out (Green)
The stereo headphone jack is used to connect the system’s audio out signal to
amplified speakers or headphones.
MIC-IN (Pink)
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
Line-IN (Blue)
The Line-in jack is designed to take input from a higher-powered sound source.

Chapter 1
18
KPC-2150 Series User’s Manual
Mechanical Dimensions
542.6 x 339.2 x 64.5 mm ( W x D x H )
Figure 2 Mechanical Dimensions

Chapter 2
19
KPC-2150 Series User’s Manual
Chapter 2
Getting Started
Setting up your PC
Connecting the monitor
Connect the HDMI / VGA cable from your display to the HDMI / VGA port.
Figure 3 VGA / HDMI
VGA
HDMI

Chapter 2
20
KPC-2150 Series User’s Manual
Connecting USB mouse & keyboard
Your KPC-2150 does not come with a keyboard and mouse, but you can use any
USB keyboard or mouse with your computer.
Figure 4 Connect USB mouse & keyboard
NOTE
Using a third-party USB mouse or keyboard may require software drivers.
Check the manufacturer’s website for the latest software drivers.
Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel
and the other end to a hub or switch.
Figure 5 RJ45 connector
USB
LAN