Quantum Fireball 1080 User manual

1 of 1
ATA Configuration Guide
CMOS Values
C
apacity 540MB 1080MB
C
ylinders 1056 2112
H
eads 16 16
S
ectors 63 63
W
riting Precomp 65535 65535
L
anding Zone 1056 2112
Note on Write Pre-compensation:
The Quantum Fireball does not require write pre-compensation, your CMOS setting should be set to
reflect that this feature is not enabled. If the setting of 'none' is not present, the value 65535 is a
number that the BIOS will accept to disable this feature.
Jumper Settings
S
ingle Drive D S only
M
aster Drive D S only
Slave Drive
N o jumpers
Fireball 540/1080
fireball_540_jumper.pdf

2 of 2
SCSI Configuration Guide
Jumper Settings
Drive Termination
E
nable Termination T E jumper on
D
isable Termination T E jumper off
Set SCSI ID
S
CSI ID A0 A1 A2
0
Off Off Off
1
On Off Off
2
Off On Off
3
On On Off
4
Off Off On
5
On Off On
6
Off On On
7
On On On
ote: PK (Park) jumper has no defined value and is used to hold extra jumper. N
Fireball 540/1080
fireball_540_jumper.pdf

Fireball 540/1080
fireball_540_jumper.pdf
3 of 3