quhwa VP-820A ID User manual

Instruction Manual
VIDEO DOOR PHONE WITH ID UNLOCK
FUNCTION FOR VILLA
□ VP-820A ID
□ VP-720A ID

1.Features 2
2.Outdoor Camera Performance Data 2
3.Indoor Monitor Performance Data 3
4.Indoor Monitor Installation 4
5.Outdoor Camera Installation 4
6.Notices of Wiring Diagram 5
7.Operation Instruction 9
8.Accessories 10
9.Notices 10
CONTENT PAGE

1. VP-720A ID indoor monitor is super slim, with only 18.5mm thickness;
VP-820A ID indoor monitor uses 8' digital TFT screen with clear images to
ensure the best photo quality; Gloss surface; Ipod white and piano black
colours available.
adjustable in four directions: up, down, left and right.
3. Low power consumption, no radiation and high definition.
4. Hands free communication.
5. Outdoor camera or indoor monitor with electric-controlled door release and
8. Brightness, contrast, ring volume and talking volume adjustable.
9. Enclosed 15M cable and one adapter for DIY market.
6. Monitoring the outside.
7. Fourteen polyphonic melodies for selection.
2. Water-proof, vandal-proof, oxidation-proof outdoor camera with camera angle
1.Features
ID function.
2.Outdoor Camera Performance Data
1 . IR distance more than 4M
2. Automatic gain control
3 . Working temperature: -20°C~50°C
4. Resolution: CMOS more than 380 TV line
CCD more than 420 TV line
5 . Outdoor camera dimension:
112【W】X 158【H】X 38【D】mm
ID Unlock PCB
SET RUN
Call
Name Plate
Infrared Light
Camera
Microphone
Speaker
Camera
Rotation Hit

3.Indoor Monitor Performance Data
Power Indicator Light
Speaker
Unlock
Talk
Microphone
Monitor
Speaker
Unlock
Talk
Microphone
Monitor
Power Indicator Light
VP-820A ID Indoor MonitorVP-720A ID Indoor Monitor
1. Adapter input voltage: AC110-120V/60Hz or AC220V-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120S±10%
4. Monitoring last time: 40S±10%
2
5. Working distance: 50M(5 x 0.75mm )
6. Power consumption: standby＜0.5W,
working＜10W
7. Illumination intensity: 2 luces
8. Visual angle: 92° wide-angle
9. Working temperature: -10°C~40°C
10. Relative humidity: 10-90%(RH)
Parameter
Screen Size (Lnch)
Resolution (Dot)
Active Area (mm)
Pixel Size (mm)
169.4【W】X 100【H】X 5.7【D】
0.107【W】X 0.37【H】
154.1【H】X 86.58【V】
480 X 3 X 234
7.0
VP-720A ID
11. Indoor monitor dimension:
VP-720A ID:255【W】X 154【H】X 18.5【D】mm
VP-820A ID:275【W】X 180【H】X22【D】mm
Chroma Adjuster
Brightness Adjuster
Talking Volume Adjuster
Volume Button
Music Selection
18.5mm
Menu Key
Volume Button
Music Selection
Talking Volume Adjuster
+
22.0mm
VP-820A ID
Connection
Specifications Model VP-720A ID VP-820A ID
Screen Figure
Dimension(mm)
183【W】X 141【H】X 6.3【D】
0.2025【W】X 0.2025【H】
162.0【H】X 121.5【V】
800 X 3 X 600
8.0

21
Bracket
4.Indoor Monitor Installation
1. Fix the bracket of the video indoor monitor on the wall with screws
(Picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug
the enclosed adapter into the sockets and connect the monitor (Picture 2).
5.Outdoor Camera Installation
1. Take out the screws located at the bottom of the outdoor camera and take
out the metal front cover of the outdoor camera (Picture 1).
2. Take off the name plate for marking family name or room name, and then
fix the screws of the back cover (Picture 1).
1
30.0CM
140~170CM
call within 30cm
32
3. nstall the outdoor camera at a height of 1.4m-1.7m, and make sure it I
(Picture 2). avoids the direct sunshine or rain

6.Notices of Wiring Diagram
4. Fix the bracket of the outdoor camera on the wall by tightening screws,
and then fix the screws at the bottom of the outdoor camera (Picture 3).
2
50-100 meters, please use the 5×1.0mm wire.
The video door phone kit includes 15 meters wire. If wanting extension
2
to 15-50 meters, please use the 5×0.75mm wire; If wanting extension to
1. VP-720A ID/820A ID Outdoor Camera Electronic Control Lock
Wiring Diagram
2. The 5,6 connection terminals of the outdoor camera connect to the electronic
lock.
1. The 1,2,3,4,7 connection terminals of the outdoor camera connect to the
1,2,3,4,5 connection terminals of the indoor camera accordingly.
1 Audio Wire . 2. Ground Wire 3. Video Wire 4. Power Wire
7. ID Card Function Wire
.
.
.
+
.
.
.
-
DC15V
.
.
Indoor Monitor
Outdoor Camera
Lock

2. VP-720A ID/820A ID Indoor Camera Electronic Control Lock
Wiring Diagram
1 Audio Wire . 2. Ground Wire 3. Video Wire 4. Power Wire
7. ID Card Function Wire
2. The 6,7 connection terminals of the indoor monitor connect to the electronic
lock.
1. The 1,2,3,4,7 connection terminals of the outdoor camera connect to the
1,2,3,4,5 connection terminals of the indoor camera accordingly.
.
.
.
+
.
.
.
-
DC15V
.
.
.
Outdoor Camera
Lock
Indoor Monitor

3. VP-720A ID/820A ID Outdoor Camera Electronic Control Lock
Wiring Diagram
1 Audio Wire . 2. Ground Wire 3. Video Wire 4. Power Wire
7. ID Card Function Wire (optional)
Outdoor Camera
Lock
Indoor Monitor A
1. The 1,2,3,4,7 connection terminals of the outdoor camera connect to the
connection terminals of the indoor monitor A ;1,2,3,4,5
The 5,6 connection terminals of the outdoor camera connect to the electronic
lock.
2.The other group of 1,2,3,4 connection terminals of the indoor monitor A connect
the 1,2,3,4 connection terminals of the indoor monitor B. to
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
Indoor Monitor (optional)Indoor Monitor B (optional)

4. VP-720A ID/820A ID Outdoor Camera Electronic Control Lock
Wiring Diagram
1 Audio Wire . 2. Ground Wire 3. Video Wire 4. Power Wire
7. ID Card Function Wire (optional)
1. The 1,2,3,4,7 connection terminals of the outdoor camera A connect to the
3,4,7 connection terminals of the outdoor camera B connect to the 1,2,3,4,5
connection terminals of the second camera controller B ;
2.The 1,2,3,4,5,6,7 connection terminals of the indoor monitor A connect to the
1,2,3,4,5,6,+ connection terminals of the second camera controller IN ;
The other group of 1,2,3,4,5,6 connection terminals of the indoor monitor A
connect to the 1,2,3,4,5,6 connection terminals of the indoor monitor B;
Same connection between monitor B and C.
1,2,3,4,5 connection terminals of the second camera controller A ;The 1,2,
1 2 3 4 5 6 7
Lock
Lock
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
.
.
.
.
.
.
.
7
.
.
.
+
.
.
.
-
DC15V
.
.
Indoor Monitor C (optional)
Indoor Monitor A Indoor Monitor B (optional)
Outdoor Camera A Outdoor Camera B (optional)

7. Ring volume can be adjusted by pressing the button at side of monitor.
8. In order to reach the best image result, please take off the protective coating
on screen.
Firstly, use the delete card to touch the ID card touching zone of the outdoor
station.
is added successfully. At most 100 user cards can be added.
9. 2. If need to delete any user cards, please do according to the following steps:
Thirdly, use the adding card to touch the same area. Then the new user card
Secondly, use the user card to touch the same area.
9. ID function instruction.
9. 1. The kit including three cards. If need more
user cards, please do according to the
following steps:
Firstly, use the adding card to touch the ID card touching zone of the outdoor
station.
Secondly, use the user card to touch the same area.
6. 14 polyphonic melodies for option by pressing the button at the side of monitor.
7.Operation Instruction
be adjusted by plus or minus button.
5. Talk volume can be adjusted by knob.
sequently dislay functions BRIGHT, CONTRAST, COLOR and LD, which can
4. VP-820 operation: if user presses the menu key continuously, screen will
1. Press CALL button of outdoor camera and graceful rings will be heard from
indoor monitor as well as images of visitors will be seen. Then you can talk.
The talking time can last about 120 seconds.
2. Press TALK button after pressing MONITOR button to monitor the outside
and talk with visitors. Press the talk button after talking is over.
3. The brightness, chroma and volume can be adjusted by pressing the button
or rotating the knob to reach the best result.
9

8.Accessories
9.Notices
1 . Do not install the indoor monitor at high temperature, high humidity place
or near TV.
2 . No touching the monitor screen with wet hands.
3. Please use only soft cloth to clean the monitor screen or camera in order
to get a clear image.
4 . Please avoid throwing or hitting the units.
5 . Image could be illegible if the camera is shined by strong light.
6. If you use internal wireless communication systems, image may be fuzzy
because of interference from radio waves.
■ One indoor monitor ■ One outdoor camera
■ One adapter ■ One bracket for indoor monitor
■ 15M cable ■ Screws
■ One adding card ■ One delete card
■ One user card
first ID card will be adding card, and the second will be delete card.
Fourthly, turn off the power, and let the jumper wire to be RUN condition. The
zone of the outdoor station accordingly. If there is a long ring sound after
the second ID card touching, the re-setting is successful.
be SET condition.
Thirdly, turn on the power, and use two ID card to touch the ID card touching
Secondly, please turn off the power, and let the ID unlock PCB jumper wire to
Firstly, open the back cover of outdoor station.
Thirdly, use the delete card to touch the same area. Then the user card is
deleted successfully.
9.3. The adding card and delete card are set well already. If the user loses the
adding card or delete card, he or she can re-program a new setting by doing
the following steps:
10