7EN
SECURITY NOTE
To avoid possible damage to you or others or financial damages, please be sure to pay
attention to the following safety precautions.
Warning
If the machine's power supply cord is damaged, you must ensure that the manufacturers
of the machine, maintenance service center or qualified technicians replace it to avoid any
potential hazard.
Don’t touch the power plug
with wet hands.
Before cleaning the appliance,
please make sure have power off.
Before start the machine,
please insert the plug
completely into the socke.
Please clean the power plug
regularly.
Do not insert rods or other metal
objects in the air outlet or inlets.
Do not plug in the device
on an electrical socket with
greater than the specified
output.
Do not damage the power
cable and socket.
Do not disassemble or
modify the device on your
own.
No wet
hands!
Pull the
plug!
Caution
Caution
Caution Caution
Otherwise, it may cause the risk
of an electric shock.
Otherwise, machine may run suddenly,
causing the risk of getting an electric shock.
Failure to fully insert the plug into the socket
may cause an electric shock and the risk
of overheating or fire hazard.Do not use a
damaged plug or loose power socket
Using a universal socket or a socket
exceeding the specified value of the
equipment may cause overheating
and a fire hazard.
In the use of the machine, don't bind,
wires. Using a broken wire may cause
an electric shock, short circuit, or fire
hazard.
Do not cut, modify, excessively distort,
twist, pull, or put any weight on the
wires or plugs.
Otherwise it may cause electric shock,
failure, or fire accident.
Otherwise, it may affect the internal parts
and cause electric shock or damage
Accumulation of dust or moisture on the
power plug can damage the insulation,
resulting in a fire hazard.
Pull out the power plug, then wipe with a dry
cloth (do not use a wet cloth).
Remember to remove the power plug from
the socket if it is not used for a long time.
