Quintum Tenor AXE1600 User manual

Tenor AX VoIP MultiPath Switch
• 8, 16, 24 or 48 Analog line and trunk interfaces
• Up to 48 simultaneous VoIP calls
• Available in MultiPath or Gateway configurations
• Auto-Provisionable
• Survivable
• Unified Communications Proxy (UCP)
• Supported by Remote Management Tools*
• Perfect for small to medium sized businesses, SOHOs
Tenor S (Survivable MultiPath Switch)
Offers a Survivable Branch Office VoIP
Access Solution for IP PBXs and IP Centrex
Quintum's Tenor S line is a complete SIP-based VoIP solution
for the branch office or for service provider customer premise
equipment, providing full survivability in the event that access
to the central and/or hosted IP PBX is lost. Because it delivers
a complete solution in a single device - and because it offers
such easy, scalable implementation and management - the
Tenor S line significantly reduces the total lifecycle cost of VoIP
deployment, while optimizing service reliability. Tenor S also
offers PSTN connectivity and legacy equipment integration for
both analog and modem based devices.
The Tenor VoIP MultiPath Switch
Offers a Robust VoIP Switching Solution
For a Variety of Applications
Quintum's Tenor switching/gateway solutions are deployed
worldwide to provide highly reliable, easy-to-implement VoIP
connectivity in a full range of enterprise and service provider
environments. These highly adaptable solutions work with
traditional PBXs, legacy analog equipment, IP PBXs and IP
phones, IVR and ACD systems, RADIUS servers, and other
critical components of end-to-end H.323- and SIP-based
communications environments. They are thus ideal for a wide
variety of applications including interoffice trunking, integration
of IP PBXs with legacy infrastructure, service provider VoIP
trunking, call centers, calling card services, call shops and VoIP
termination.
The Quintum® Tenor® AX Series gives small to medium sized businesses, SOHOs and branch offices with analog voice
infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). Tenor offers a complete
survivable branch office solution providing support for integrating analog endpoints and the PSTN, while offering back-
up call processing support for all SIP and analog calls.
Both versions of Tenor include the features that made Quintum the VoIP market value leader
• MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming
of the PBX, or upgrades are required and no need for special dialing plans.
• Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve
the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently
"hop off" to the PSTN, to reach off-net locations.
• Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring
the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor
to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor
configuration.
•Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP - SIP, TDM - TDM and SIP - TDM, for easy
integration with any network.
• Universal Dial Plan that provides a programmable dial plan so Tenor can be integrated into any network environment.
• PacketSaver™ Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from
multiple calls into a single packet.
• NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a
VoIP call is established with an outside party.
•Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote
Management Session Server.
and branch offices
* Available for an additional cost

GENERAL SPECIFICATIONS
Dimensions: 1U High Chassis
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm. x H 4.5cm. x D 27.6cm.
• Maximum weight: 10 lbs. (4.55kg.)
• AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts
• Operating temperature: 40° - 104° F (5° - 40° c.)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15 EN55022, EN55024,
EN61000-2-3, EN61000-3-3, AS/NZS3260
• Safety: UL60950, EN60950, AS/NZS60950
CALL MANAGEMENT FEATURES
• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced IP routing and IP port mapping
• Pass-through support for calls to Toll-Free, local and
special service numbers (ie. emergency services, etc.)
• Automatic appending and stripping of digits to
dialed numbers
• Call Detail Records
• Least cost routing with external Quintum VoIP Call
Routing Server*
• Type I Caller ID/Name support (Telcordia, ETSI, NTT
and DTMF)
TECHNICAL SPECIFICATIONS
Telephony Specifications
• Voice algorithms: G.723.1a, G.729ab, G.711
• Auto codec negotiation
• Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps,
using industry standard T.38; Super G3 compatible up
to 33.6 Kbps
• Modem support with G.711
• Choice of 8, 16, or 24 FXS and/or FXO configurations
or a 48 FXO only configuration
• Standard 50 pin RJ-21 Telco connectors
• Coding: A-law, µ-law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec.
G168, up to 128 msec tailsize
• Loop Start, Reverse Battery, Battery Disconnect
• Tandem/TDM switching
• Maximum Call Rate: 1,800 calls/hour
IP Network Specifications
• LAN Interface: 1 Fast Ethernet port (10/100Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10Base-T
or 100Base-TX connections
• DHCP Client
• QoS Support: IP TOS, DiffServ
VoIP Network Specifications
• H.323 v.3 Gateway and Integrated Gatekeeper+
• Support for multiple SIP User Agents (RFC3261 compliant endpoint)
• DTMF Signaling via RFC2833 or SIP Info
• SIP Supplementary Services
• SIP Refer Method Support
• Message Waiting Indicator
• IVR/RADIUS server support for AAA with integrated multi-lingual IVR+
• Adaptive Voice Activity Detection (VAD) with Comfort
Noise Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Concealment
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 48 simultaneous VoIP calls
• Support for DNS-SRV
• Survivability - (Option only available in AXM, AXT and AXE Series)
• SIP Outbound Proxy
• Supports up to 100 SIP endpoints
Configuration / Management
• Auto-Provisionable
• Quintum Tenor Configuration Manager (GUI) for configuration of
remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring
and CDR monitoring
• Remote access with external Remote Management Session Server
• SNMPv2 Agent
• Command Line Interface
* Quintum product purchased separately
+ Original Quintum Tenor Only
Tenor AX
Series
MultiPath
AXM Series
Station
AXG Series
Trunk
AXT Series
Enterprise
AXE Series
8 Simultaneous
VoIP Calls 8 FXS / 8 FXO 8 FXS / 0 FXO 0 FXS / 8 FXO 8 FXS / 2 FXO
16 Simultaneous
VoIP Calls 16 FXS / 16 FXO 16 FXS / 0 FXO 0 FXS / 16 FXO 16 FXS / 2 FXO
24 Simultaneous
VoIP Calls 24 FXS / 24 FXO 24 FXS / 0 FXO 0 FXS / 24 FXO 24 FXS / 2 FXO
48 Simultaneous
VoIP Calls 0 FXS / 48 FX0
Tenor AX VoIP MultiPath Switch
Rev. 6
71 James Way, Eatontown, New Jersey 07724
Tel 1-877-SPEAK-IP .1-732-460-9000 .Fax [phone]
www.Quintum.com