Quoizel Hathaway TF5621MBK User manual

- of 2 -1
Released Date: 2022-03-05
A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil
applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of Tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the Tiffany shade this is a normal oxidation process. Use a small amount of lemon oil
or mineral oil applied directly to oxidized areas and the soldered area will return to like new.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
CARE OF TIFFANY STYLE SHADE
SAFETY INFORMATION
CARE AND MAINTENANCE
PACKAGE CONTENTS
C
D
Big Knurled Nut
x 1
F
Check Ring
x 1 J
Finial
x 1
G
Spacer Tube
x 1
H
Nipple with Hex Nut
x 1
Flat Washer
x 1
K
Tiffany Shade
x 1
E
Small Knurled Nut
x 1
INSTALLATION GUIDE FOR TF5621MBK
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
ASocket Assembly
x 1
BBase
x 1
Rubber Washer
x 1
I

- of 2 -2
INSTALLATION
Your installation is now complete! Restore electricity and save this sheet for future reference.
Install Shade
Incorrect
base/ socket/
shade Orientation
Correct
base/ socket/
shade Orientation
Shade Socket
Base
Socket
Base
Shade
* Make sure the shade, sockets and base are in the same
orientation after assembly (refer to the following diagram).
1
Install Base and Socket
Assembly together
2
Install Bulbs
Install two correct bulbs referring to
fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type (not
included):
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
60W
MAX
Cable
3
Install Nipple with
Hex Nut
4
Install Spacer Tube
and Check Ring
* Pull the cable out of the base from the
base during assembly.
Small Knurled Nut
Big Knurled Nut
Flat Washer
Rubber Washer