Quoizel TF1508FVB Mounting instructions

Part Description Quantity
A1pc.
1pc.
B
Finial
Package Contents
Pleasegoto forproductcleaningtips.Gotothe selection.
(2)MediumBase100WMaximum,Alternatebulbs(2)23WCFLMaximum.
15-20minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams
belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or
operatethefixture.Contactcustomerserviceforreplacementparts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
ToolsRequired:None
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Assembly Instruction Sheet #IS-TF1508FVB
For Style TF1508FVB
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
1of4
Shade
1pc.
1pc.
CFlat Washer
Big Knurled Nut
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
A
B
D
E
D
1pc.
1pc.
E
Check Ring
2015 QuoizelInc. November2015
F
G
H
1pc.
F
Tube
G
1pc.
1pc.
HCenter Stem
Socket Assembly
Small Knurled Nut
I
1pc.
I
Rod
J
L
2 pcs.
J
Rod with Nipple
K
K
1pc.
LBase
C

TF1508FVB
FINISH: VINTAGE BRONZE
2of4
18” Dia.
9”
61.5”
51”
10” Dia.
1
2
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"REQ.
NO. REPLACEMENT PART DESCRIPTION
PART NUMBER
(2) 100W Medium
Base Bulbs
(Not Supplied) NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
1
2
11508FVBTF
G3503SH
BASE VINTAGE BRONZE TF1508FVB
TIFFANY SHADE 18"D
1
1
1
2

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of4
Assembly Instruction Sheet #IS-TF1508FVB
For Style TF1508FVB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
2015 QuoizelInc.
STEP 1 Assemble Rod and Socket
Assembly
-
A. Thread the Rod (J) and Rod with Nipple (K) to the Base
(L) as shown. Hand tighten until snug.
B. Thread the Socket Assembly (I) into the top end of Rod
with Nipple (K). Hand tighten until snug.
Figure 1
Base
Rod with
Nipple
Socket
Assembly
Rod with
Nipple
Rod
Figure 2
STEP 2 attach Center Stem to Fixture Body-
A. Thread one end of Center Stem (H) into Hex Coupling
on the top of Socket Assembly (I).
B. Please Tube (G) and Check Ring (F) over the Center
Stem (H). Secure by thread Small Knurled Nut (E) onto
the Center Stem (H), hand tighten until snug.
Socket
Assembly
Tube
Center Stem
Hex
Coupling
Check
Ring
Small Knurled Nut
November2015

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of4
Assembly Instruction Sheet #IS-TF1508FVB
For Style TF1508FVB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 3 attach Shade to Fixture Body-
A. Thread Big Knurled Nut (D) onto Center Stem (H).Hand
tighten until snug.
B. Place the Flat Washer (C) and the Shade (B) over
Center Stem (H). Adjust the Big Knurled Nut (D) to
proper location for the Flat Washer (C), the Shade (B)
and Finial (A). secure by thread Finial (A) onto the
Center Stem (H), hand tighten until snug.
Figure 3
2015 QuoizelInc.
STEP 4 -Install Bulb
A. This fixture uses standard bulb with standard screw
base . Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your lamp is now assembled and ready to use.
Enjoy!
Figure 4
Shade
Big Knurled Nut
Center Stem
Finial
Bulb
Socket
November2015
Flat Washer