Quoizel TFKY6223IB Mounting instructions

Part Description Quantity
A1pc.
1pc.
B
Finial
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone [phone]
Fax [phone]
www.quoizel.com
ToolsRequired:None
EstimatedAssemblyTime:15-20minutes
Preparation:Identify andinspect allparts beforebeginning installation.Check package
contentlist anddiagrams belowto besure allparts arepresent. Ifany partsare missing
ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer
servicefor replacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Assembly Instruction Sheet #IS-TFKY6223IB
For Style TFKY6223IB
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
1of5
BulbRecommended: (2) MediumBase 100WMaximum
1pc.
C
Shade
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
A
B
C
D
D1pc.
Stem
Base
2012 QuoizelInc. April2012

TFKY6223IB
FINISH: IMPERIAL BRONZE
1
2
2of5
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"REQ.
1
1
1
NO. REPLACEMENT PART DESCRIPTION
BASE IMPERIAL BRONZE TFKY6223IB
FINIAL IMPERIAL BRONZE 0.875”D X 0.875”H
SHADE TIFFANY 18”SQ X 5.5”H
PART NUMBER
16223IBTFKY
M2332FIIB
G3275SH
(2)100W A19
Medium Base Bulb
(Not Supplied)
(1)7W C7
Candelabra Base
Bulb (Supplied)
18.5" Sq.
18" Sq.
5"
18"
24"
3
1
2
3

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of5
Assembly Instruction Sheet #IS-TFKY6223IB
For Style TFKY6223IB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 1 Remove Socket inside of the Base-
A. Remove the Socket inside of the Base (D) by unlocking
Lock Balls.
Figure 1
Socket
Assembly
Bottom
Plate
Lock Ball
Socket
2012 QuoizelInc.
STEP 2 Remove Styrofoam inside of the
Base
-
A. Remove the Styrofoam inside of the Base.
Figure 2
Base
Styrofoam
April2012

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of5
Assembly Instruction Sheet #IS-TFKY6223IB
For Style TFKY6223IB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 3 Insert C7 Bulb inside of the Base-
A. Insert the C7 Bulb inside of the Socket Assembly. Pass
holes on the Bottom Plate over the Bolts underside of
the Socket Assembly and secure with Lock Balls. Hand
tighten until snug.
Figure 3
STEP 4 Attac Stem to Base-h
A. Thread the beaded end of the Stem (C) into the
Coupling on the top center of Base (D). Hand tighten
until snug.
Figure 4
Socket Assembly
Stem
Coupling
Socket
Assembly
Bottom
Plate
Lock Ball
Bolt
2012 QuoizelInc. April2012

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of5
Assembly Instruction Sheet #IS-TFKY6223IB
For Style TFKY6223IB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 5 -Attach Shade
A. Place the Shade (B) over the Stem (C), attach onto the
Arms. Thread the Finial (A) onto the Stem (C). Hand
tighten until snug.
Figure 5
Finial
Stem
Arm
Shade
STEP 6 -Install Bulb
A. This fixture uses standard bulb with standard screw
base . Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your lamp is now assembled and ready to use. Enjoy!
Figure 6
Bulb B
Socket
STEP 7 replace the Bulb inside of the base-
A. Remove the Bottom Plate from the Socket Assembly by
unlocking the Lock Balls.
B. Replace the broken or damaged C7 Bulb inside of the
Base, referring to maximum wattage or labels.
C. Insert the replaced C7 Bulb inside of the Socket
Assembly. Pass holes on the Bottom Plate over the
Bolts underside of the Socket Assembly and secure
with Lock Balls. Hand tighten until snug.
Figure 7
Socket
Assembly
Lock Hole
Bottom
Plate
Lock
Ball
Hole
2012 QuoizelInc. April2012