R.V.R. Elettronica TX05KSS/61D082B User manual

TX05KSS/61D082B &
TX05KSS/61S082
USER MANUAL
Manufactured by R.V.R ELETTRONICA S.p.A. Italy

TX05KSS/61D082B & TX05KSS/61S082 - User Manual
Version 1.0
© Copyright 2016
R.V.R. Elettronica SpA
Via del Fonditore 2/2c - 40138 - Bologna (Italia)
Telefono: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.rvr.it
All rights reserved
Printed and bound in Italy. No part of this manual may be reproduced,
memorized or transmitted in any form or by any means, electronic
or mechanic, including photocopying, recording or by any informa-
tion storage and retrieval system, without written permission of the
copyright owner.
File Name: TX05KSS_61D082B-61S082_ING_1.0.indb
Version: 1.0
Date: 28/11/2016
Revision History
Date Version Reason Editor
28/11/2016 1.0 First Version J. H. Berti












TX03KSS/43D062B & TX03KSS/43S062
i
User Manual
Rev. 1.0 - 29/08/13
DECLARATION OF
CONFORMITY
Ravagnani Stefano
Technical Manager
R.V.R Elettronica S.p.A.
We, the undersigned,
Manufacturer’s Name: R.V.R. Elettronica SpA
Manufacturer’s Address: Via del Fonditore 2/2c
I - 40138 Bologna
Italy
Certify and declare under our sole responsibility that the product:
Product Description: FM Solid State Transmitter Station for radio
broadcasting
Model: AFM-PTD2PJG2B
Composed: 1- PJ2500LCD (2x Amp.) & PTX150DDS (Exciter)
Variants: 2- PJ2500LCD (2x Amp.) & PTX100DDS (Exciter)
Frequency Range: 87.5 ÷ 108.0 MHz
RF Power Output: 500 ÷ 5000W
when used for its intended purpose, is in compliance with the essential requirements and
other relevant provisions of Directive 99/5/CE “R&TTE”, and therefore carries the “CE” mark.
The conformity assessment procedure referred in Article 10 and detailed in Annex III of Directive
99/5/EC has been followed.
The following harmonized standard have been applied:
Radio (3.2): ETSI EN 302 018-1 V1.2.1 (2006-03) +
ETSI EN 302 018-2 V1.2.1 (2006-03)
EMC (3.1b): ETSI EN 301 489-1 V1.9.1 (2011-04) +
ETSI EN 301 489-11 V1.3.1 (2006-05)
Safety (3.1a): EN 60215 (1997-10)
The technical documentation is held at the location above, as required by the conformity assessment
procedure.
Bologna, Italy, 26/05/2011

ii User Manual
Rev. 1.0 - 29/08/13
TX05KSS/61D082B & TX05KSS/61S082
Technical Specification
TX05KSS/61S082 TX05KSS/61D082B
Conditions U.M. Value Value
Frequency range MHz
Rated output power W
Modulation Type
Operational Mode
Ambient Working temperature °C
Frequency programmability
Frequency stability WT from -10°C to 50°C ppm
Modulation capability kHz
Pre-emphasis mode μS
Spurious & harmonic suppression dBc
Asynchronous AM S/N ratio
Referred to 100% AM,
with no de-emphasis
dB
Synchronous AM S/N ratio
Referred to 100% AM,
FM deviation 75 kHz by 400Hz sine,
without de-emphasis
dB
RMS @ ± 75 kHz peak,
HPF 20Hz - LPF 23 kHz,
50 μS de-emphasis
dB
Qpk @ ± 75 kHz peak,
CCIR weighted,
50 μS de-emphasis
dB
Qpk @ ± 40 kHz peak,
CCIR weighted,
50 μS de-emphasis
dB
Frequency Response 30Hz ÷ 15kHz dB
Total Harmonic Distortion THD+N 30Hz ÷ 15kHz %
Intermodulation Distortion
Measured with a 1 KHz,
1.3 KHz tones,
1:1ratio, @ 75 kHz FM
%
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
Composite S/N FM Ratio
RMS @ ± 75 kHz peak,
HPF 20Hz - no LPF,
50 μS de-emphasis
dB
30Hz ÷ 53kHz dB
53kHz ÷ 100kHz dB
THD+N 30Hz ÷ 53kHz %
THD+N 53kHz ÷ 100kHz %
Intermodulation distortion
Measured with a 1 KHz,
1.3 KHz tones,
1:1ratio, @ 75 kHz FM
%
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
Stereo separation 30Hz ÷ 53kHz dB
RMS @ ± 75 kHz peak,
HPF 20Hz - LPF 23 kHz,
50 μS de-emphasis,
L & R demodulated
dB
Qpk @ ± 75 kHz peak,
CCIR weighted,
50 μS de-emphasis,
L & R demodulated
dB
Qpk @ ± 40 kHz peak,
CCIR weighted,
50 μS de-emphasis,
L & R demodulated
dB
Frequency Response 30Hz ÷ 15kHz dB
Total Harmonic Distortion THD+N 30Hz ÷ 15kHz %
Intermodulation distortion
Measured with a 1 KHz,
%
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
Stereo separation dB
Main / Sub Ratio 30Hz ÷ 15kHz dB
Frequency response 40kHz ÷ 100kHz dB
RMS, ref @ ± 75 kHz peak,
no HPF/LPF,
0μS de-emphasis,
with 67 kHz tone on SCA input
@ 7,5kHz FM deviation
dB
RMS, ref @ ± 75 kHz peak,
no HPF/LPF,
0μS de-emphasis,
with 92 kHz tone on SCA input
@ 7,5kHz FM deviation
dB
Power supply type VAC
AC Supply Voltage V
AC Apparent Power Consumption VA 7641 8126
Active Power Consumption W 7467 7792
Overall efficiency % > 60 (Typical 66) > 60 (Typical 62)
Power Factor
Connector
Cooling
Acoustic Noise dBA
Connector
Type
Impedance Ohm
Input Level, Adjustment Range dBu
Connector
Type
Impedance Ohm
Input Level, Adjustment Range dBu
Connector
Type
Impedance Ohm
Input Level, Adjustment Range dBu
Connector
Type
Impedance Ohm
Input Level, Adjustment Range dBu
Connector
Type
Impedance Ohm
Connector
Impedance Ohm
Connector
Impedance Ohm
Connector
Impedance Ohm
Output Level dBc
Connector
Impedance Ohm
Output Level Vpp
Output Level, Adjustment Range dBu
Connector
Impedance Ohm
Output Level Vpp
≥ 60 (65 typical)
GENERALS
87.5 ÷ 108
5000
Direct Digital Synthesis
Mono, Stereo, Multiplex
-10 to + 50
By software with 1, 10, 100 , 1000 kHz steps
±1
150
0, 50 (CCIR), 75 (FCC)
< 80 (85 typical)
> 75 (typical 79)
≥ 50 (55 typical)
MONO OPERATION
S/N FM Ratio
> 80 (typical 83)
>76
>70
better than ± 0.5 dB (typical ± 0.2)
< 0.05 (Tipical 0.03%)
< 0.02
< 0.1 (typical 0.05)
MPX OPERATION
< 0.05
< 0.1 (typical 0.05)
> 70 dB
STEREO OPERATION
Stereo S/N FM Ratio
> 80 (Typical 83)
> 70 (Typical 73)
> 68 (Typical 70)
Frequency Response
± 0.2
± 0.5
Total Harmonic Distortion
< 0.05
< 0.1
Mono Phase / Treephase
AC Power Input
230 ±15% / 400 ±15%
0,97
Terminal Block L+N+PE / RST+N+PE
POWER REQUIREMENTS
± 0.2
< 0.03
< 0.02
< 0.1 (typical 0.05)
> 70
> 45 (typical 50)
SCA OPERATION
± 0.5
Crosstalk to main or to stereo channel
> 75 (typical 79)
> 80 (typical 81)
SCA/RDS
2 x BNC
unbalanced
10 k
-30 to +13
VARIOUS
Forced, with internal fan
<75
AUDIO INPUTS
Left
XLR F
Balanced
10 k or 600
-12.5 to +12.5
Right
XLR F
Balanced
10 k or 600
-12.5 to +12.5
MPX
BNC
unbalanced
10 k
-12.5 to +12.5
MPX Monitor
BNC
>600
-12.5 to +5;
or -6.5 to +11 (internally adjustable +6dBu by jumper);
or -0.5 to 17 (internally adjustable +12dBu by jumper)
RF Output
7/8" EIA type
50
RF Monitor
BNC
50
approx. -40
BNC
>600
2.2
AES/EBU
XLR F
Balanced
110
TOS/Link
TOS Link
Optical
OUTPUTS
Pilot output
-12.5 to +5;
or -6.5 to +11 (internal jumper to increase the ouput level of +6dBu);
or -0.5 to 17 (internal jumper to increase the ouput level of +12dBu)

TX03KSS/43D062B & TX03KSS/43S062
iii
User Manual
Rev. 1.0 - 29/08/13
Table of Contents
1. Preliminary Instructions 1
2. Warranty 1
3. First Aid 2
3.1 Electric shock treatment 2
3.2 Treatment of electric burns 2
4. General Description 3
4.1 Composition 3
5. Installation and Use 5
5.1 Installation 5
5.2 First Start 9
6. First Operations 17
6.1 Exciter (PTX DDS) 17
6.2 Amplifier (PJ LCD) 19
6.3 Changeover (SCML1+1SL) 19