Rac Black Box User manual

Your RAC Black Box telematics device
Self-fit guide
M008559V4

1. Turn the ignition off.
2. Find your car’s 12v socket. It’s usually in the front
console area.
If you’re unsure where this is, you can check
your car’s handbook.
3. Plug your RAC Black Box telematics device into
your 12V socket, blue tip first, by pressing firmly
until it’s securely in place. After a few seconds
you should see a ring light illuminate on top of
the RAC Black Box telematics device to let you
know it’s connected. If this doesn’t happen, turn
your ignition on for a couple of minutes to make
sure your socket has power.
4. We’ll send you an email to confirm the
installation was successful and we’re receiving
data from your RAC Black Box telematics device.
This may take up to 24hrs to show in your
RAC Black Box App.
Still having issues?
Contact us on:
[e-mail]
or 0330 808 4353
Device support opening hours:
Monday - Friday 9-5pm
How to fit your
RAC Black Box
telematics device
DECLARATION OF CONFORMITY
Hereby, Trakm8 Ltd declares that the radio equipment
type Connect 200 is in compliance with Directive
2014/53/EU and Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
trakm8.com/docs/eu/c200
Hereby, Trakm8 Ltd declares that the radio equipment
type Connect 200 is in compliance with the relevant
statutory requirements.
The full text of the declaration of conformity is available at the
following internet address:
trakm8.com/docs/uk/c200
Trakm8 Ltd
4 Roman Park, Roman Way
Coleshill, Birmingham
West Midlands, B46 1HG
Email: [e-mail]
Enquiries: [phone]
Safety Information
6-16V Range (12V Vehicles only)
Connect 200 Current consumption, average: 30mA @ 12VDC (typical)
Connect 200 Current consumption, sleep: <1mA @ 12VDC (typical)
Internally fused (non-serviceable)
Radio Information
GSM 900 (880MHz – 960MHz) – 33 dBm
GSM 1800 (1710MHz – 1880MHz) – 30 dBm
GPS (1575.42MHz)