Rac Black Box User manual

M008561
V4
DECLARATION OF CONFORMITY
Hereby, Trakm8 Ltd declares that the radio equipment
type Connect 330 is in compliance with Directive
2014/53/EU and Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
trakm8.com/docs/eu/c330
Hereby, Trakm8 Ltd declares that the radio equipment
type Connect 330 is in compliance with the relevant
statutory requirements.
The full text of the declaration of conformity is available at the
following internet address:
trakm8.com/docs/uk/c330
Trakm8 Ltd
4 Roman Park, Roman Way
Coleshill, Birmingham
West Midlands, B46 1HG
Email: [e-mail]
Enquiries: [phone]
Safety Information
6V-16V Range (12V Vehicles only)
Connect 330 Current consumption, average: 55mA @ 12VDC (typical)
Connect 330 Current consumption, sleep: <10mA @ 12VDC (typical)
Internally fused (non-serviceable)
Radio Information
GSM 900 (880MHz - 960MHz) -33dBm
GSM 1800 (1710MHz - 1880MHz) -30dBm
GPS (1575.42 MHz)

RAC Black Box telematics device installation
1. Turn the vehicle’s ignition off
2. Locate the vehicle’s OBD port. This information can be found in the vehicle’s
operating manual. Alternatively, you can use Trakm8’s OBD online checker:
www.trakm8.com/install
3. Install your RAC Black Box telematics device in your OBD port by pressing
firmly until the unit is securely fitted in place
4. We’ll send you an email to confirm the installation was successful and
we’re receiving data from your RAC Black Box telematics device.
This may take up to 24hrs to show in your RAC Black Box App.
Still having issues?
Contact us on: r[email protected] or 0330 808 4353
Device support opening hours: Monday - Friday 9-5pm
Device OBD Port