Racelogic VBOX Video HD2 User manual

VBOX VIDEO HD2 Mounting
Bracket Assembly Guide (ACS268-ASSEM)
Assembly Guidelines
1. Attach the upper harness bar brackets to the mount base using the four black counter sunk
screws provided and tighten using the 3/32” hex key.
2. Place the VIDEO VBOX HD2 on the mount
base and secure by attaching the upper half
of the mount using the six button head
screws and the 3mm hex key.
3. Ensure the VIDEO VBOX HD2 is straight
and mounted securely.

VBOX VIDEO HD2 Mounting
Bracket Assembly Guide (ACS268-ASSEM)
4. Place the upper harness bar brackets on
the desired vehicle roll cage location and
secure using the lower harness bar
brackets and the four cap head
screws provided. Tighten using the
9/64” hex key.
5. Ensure the mount is straight and secure before use.
www.vboxmotorsport.com
Issue1